USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
Congratulations!
This product is TCO Certified
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
protection against sound spikes (headsets) and fan noise (projectors, computers)
For more information, please visit
for Sustainable IT
www.tcodevelopment.com
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2792Q
ENGLISH
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of diff erent countries from there.
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR
for energy effi ciency.
®
Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
FITTING AND REMOVAL OF BASE : ProLite XUB2792QSU .........6
FITTING AND REMOVAL OF BASE : ProLite XU2792QSU ...........7
CONTROLS AND CONNECTORS : ProLite XUB2792QSU ........... 8
CONTROLS AND CONNECTORS : ProLite XU2792QSU ............. 9
CONNECTING YOUR MONITOR : ProLite XUB2792QSU ..........10
CONNECTING YOUR MONITOR : ProLite XU2792QSU ............. 11
COMPUTER SETTING .................................................................12
ADJUSTING THE VIEWING ANGLE : ProLite XU2792QSU ........12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2792QSU ...................................................................13
PANEL ROTATION : ProLite XUB2792QSU .................................13
OPERATING THE MONITOR .............................................................14
ADJUSTMENT MENU CONTENTS ..............................................15
POWER MANAGEMENT FEATURE .............................................22
TROUBLE SHOOTING ......................................................................23
RECYCLING INFORMATION .............................................................24
APPENDIX ........................................................................................25
SPECIFICATIONS : ProLite XUB2792QSU ..................................25
SPECIFICATIONS : ProLite XU2792QSU.....................................26
DIMENSIONS : ProLite XUB2792QSU .........................................27
DIMENSIONS : ProLite XU2792QSU ...........................................27
COMPLIANT TIMING ....................................................................28
ENGLISH
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
ENGLISH
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
FOR YOUR SAFETY 1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
ENGLISH
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fi ngers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid fi nger contact with the displays base when adjusting
the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
CUSTOMER SERVICE
If you have to return your unit for service and the original packaging has been
NOTE
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CLEANING
If you drop any materials or liquids such as water into the monitor when cleaning,
WARNING
CAUTION
NOTE
unplug the power cable immediately and contact your dealer or iiyama service center.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
ENGLISH
CABINET
LCD
SCREEN
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 2560 × 1440
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
350cd/m
Supports AMD FreeSync™ technology
Quick Response Time 5ms (Gray to Gray)
Blue Light Reducer
Digital Character Smoothing
ENGLISH
2 × 2W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows
Power Management (ENERGY STAR
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
2
(Typical)
®
7/8/8.1/10 Compliant
®
and VESA DPMS Compliant)
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
Power Cable*
USB Cable
Screw for stand fi xing (3pcs)*
Quick Start Guide
CAUTION
4 BEFORE YOU OPERATE THE MONITOR
1
1
*
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
2
Accessory for ProLite XU2792QSU.
*
3
*
Accessory for ProLite XUB2792QSU.
HDMI Cable
Stand-Base
3
DisplayPort Cable
2
Stand*
Safety Guide
WALL MOUNTING
WARNING
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
L
Mounting Stage
Screw
ENGLISH
Chassis
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE : ProLite XUB2792QSU
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
ENGLISH
Use ‘thumb screw’ provided to secure base to monitor column.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove ‘thumb screw’ to remove base from monitor column.
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
Stand-Base
Thumb screw for Stand-Base fi xing
<Stopper>
Put the monitor on a fl at surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly.
6 BEFORE YOU OPERATE THE MONITOR
Stopper
FITTING AND REMOVAL OF BASE : ProLite XU2792QSU
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Hold the monitor and install the stand. Secure it using
the screw provided.
Hold the monitor and push the Stand-Base until it clicks
and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-
Base.
Unfi x the screw and remove the Stand.
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
ENGLISH
Stand
Stand-Base
Screw
Hook
BEFORE YOU OPERATE THE MONITOR 7
CONTROLS AND CONNECTORS : ProLite XUB2792QSU
ENGLISH
<Front>
Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
Power Switch ( )
Menu / Select Button (ENTER)
Scroll Up / Volume Button ( / )
Scroll Down / ECO Mode Button ( / )
Exit Button (EXIT)
Input Select Button (INPUT)
Speakers
USB Downstream Connector ( )
USB Upstream Connector ( )
Keyhole for Security Lock
NOTE
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
DisplayPort Connector (DP)
HDMI Connector (HDMI)
DVI-D 24pin Connector (DVI-D)
Cable Holes
Audio Connector (LINE OUT)
Audio Connector (LINE IN)
AC Connector ( : Alternating current) ( )
<Back>
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite XU2792QSU
ENGLISH
<Front>
Power Indicator
Blue: Normal operation
NOTE
Orange: Power Management
Power Switch ( )
Menu / Select Button (ENTER)
Scroll Up / Volume Button ( / )
Scroll Down / ECO Mode Button ( / )
Exit Button (EXIT)
Input Select Button (INPUT)
Speakers
USB Downstream Connector ( )
USB Upstream Connector ( )
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
NOTE
without your permission.
DisplayPort Connector (DP)
HDMI Connector (HDMI)
DVI-D 24pin Connector (DVI-D)
Audio Connector (LINE OUT)
Audio Connector (LINE IN)
AC Connector ( : Alternating current) ( )
<Back>
BEFORE YOU OPERATE THE MONITOR 9
CONNECTING YOUR MONITOR : ProLite XUB2792QSU
Power Cable (Accessory)
Audio Cable (Not Included)
Computer
DVI-D Cable (Not Included)*
HDMI Cable (Accessory)
AV Equipment
USB Cable (Accessory)
Mouse
Keyboard
DisplayPort Cable (Accessory)
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
ENGLISH
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
* DVI dual-link cable is not supplied with the monitor. If you use low quality DVI dual-link cable, it
may cause a result of electro-magnetic interference. Please contact the iiyama Support Centre in
your country if you wish to connect the monitor via the DVI input.
[ Collect Cables ]
Put the cables through the cable hole.
Collect cables at the back of the stand.
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite XU2792QSU
Power Cable (Accessory)
Audio Cable (Not Included)
Computer
DVI-D Cable (Not Included)*
HDMI Cable (Accessory)
AV Equipment
USB Cable (Accessory)
Mouse
Keyboard
DisplayPort Cable (Accessory)
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
ENGLISH
<Back>
* DVI dual-link cable is not supplied with the monitor. If you use low quality DVI dual-link cable, it
may cause a result of electro-magnetic interference. Please contact the iiyama Support Centre in
your country if you wish to connect the monitor via the DVI input.
BEFORE YOU OPERATE THE MONITOR 11
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 28: COMPLIANT TIMING.
ADJUSTING THE VIEWING ANGLE : ProLite XU2792QSU
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 22° upward,
ENGLISH
5° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
5° 22°
NOTE
Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fi ngers or hands when you change the angle.
12 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2792QSU
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
NOTE
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
Monitor
45°
130mm
ENGLISH
45°
Stand
PANEL ROTATION : ProLite XUB2792QSU
Adjust the monitor’s height.
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully extending
NOTE
Adjust the monitor’s angle to your preference.
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
90°
BEFORE YOU OPERATE THE MONITOR 13
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 28. You are also able to adjust the picture by following the button
operation shown below.
Press the ENTER Button to start the On Screen Display
feature. There are additional Menu items which can be
switched by using the
/ Buttons.
Select the Menu item which contains the adjustment icon
relating to the adjustment you want to make. Press the
ENTER Button. Then, use the
/ Buttons to highlight the
desired adjustment icon.
Press the ENTER Button again. Use the / Buttons to
ENGLISH
make the appropriate adjustment or setting.
Press the EXIT Button to leave the menu, and the settings
you just made would be automatically saved.
For example, to correct for OSD vertical position, select Menu item of Setup Menu and then
press the ENTER Button. Then, select OSD Position by using the
/ Buttons. An adjustment
page appears after you press the ENTER Button. Then, select V.Position by using the
Buttons. An adjustment page appears after you press the ENTER Button.
Main Menu
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Image Adjust
Language
Setup Menu
Display Information
Reset
OSD Position
OSD Time Out
Opening Logo
FreeSync
Setup Menu
Main Menu
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Image Adjust
Language
Setup Menu
Display Information
Reset
V.Position
30
On
Off
/
Then, use the
/ Buttons to change the OSD vertical position settings. The OSD vertical
position of the overall display should be changing accordingly while you are doing this.
Setup Menu
V. Position
50
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Time Out has passed. Also, press the EXIT button to quickly turn off the OnScreen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
All adjustments have only one setting which applies to all signal timings.
14 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Direct
Direct
Picture Adjust *
3
Adjustment Item Problem / Option Button to Press
Contrast *
Brightness *
2
1,2,4
Too dull
Too intense
Too dark
Too bright
Off / +1 / +2
Overdrive
It will improve the gray level response time of the LCD panel.
A higher level results in a faster response time.
Off
Typical Contrast Ratio
Adv. Contrast
On
Increased Contrast Ratio
Off Normal
ECO Mode
Mode1
Mode2
Mode3
Off
Blue Light Reducer
Mode1
Mode2
Mode3
1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
*
bright.
2
Contrast and Brightness adjustments are disabled when Adv. Contrast mode is activated.
*
3
*
Picture Adjust adjustment is disabled when i-Style Color is activated.
4
Brightness adjustment is disabled when ECO Mode is activated.
*
Brightness of back-light is reduced.
Brightness of back-light is reduced more than Mode1.
Brightness of back-light is reduced more than Mode2.
Typical
Blue light is reduced.
Blue light is reduced more than Mode1.
Blue light is reduced more than Mode2.
ENGLISH
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
ECO Mode : Press the
Button when the Menu is not displayed.
OPERATING THE MONITOR 15
Input Select
Direct
Direct
Direct
Direct
Adjustment Item Problem / Option Button to Press
DVI
Input Select
Input source is fi xed, not selected automatically when DVI, HDMI and DisplayPort which
NOTE
are selected.
HDMI
DisplayPort
Auto
Select the Digital (DVI) input.
Select the Digital (HDMI) input.
Select the Digital (DisplayPort) input.
Search for an available input source and select
automatically.
ENGLISH
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Input Select : Press the INPUT Button when the Menu is not displayed.
Audio Adjust
Adjustment Item Problem / Option Button to Press
Volume
Mute
Mute On and Off are switched as follows by pressing the Button successively.
NOTE
On Off
Digital Audio *
Suitable for HDMI/DisplayPort input only.
*
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Volume : Press the Button when the Menu is not displayed.
16 OPERATING THE MONITOR
Too soft
Too loud
Off
On
Return the sound volume to the previous level.
Turn off the sound temporarily.
Select the Line-In input. Line-In
Select the HDMI input. HDMI
Select the DisplayPort input. DisplayPort
Color Adjust
Adjustment Item Problem / Option Button to Press
1
Cool *
1
Normal *
1
Warm *
User Color *
i-Style Color *
1
2
Bluish white
Greenish white
Reddish white
Red
Green
Blue
Off
Standard
Game
Cinema
Too weak
Too strong
Return to a state set by color adjustment except
i-Style Color.
For general windows environment and monitor
default setting.
For PC game environment.
For movie and video environment.
Scenery For displaying outdoor scenery images
Text
For text editing and viewing in a word processing
environment.
*1 Cool, Normal, Warm and User Color adjustments are disabled when i-Style Color or Blue Light
Reducer is activated.
2
i-Style Color adjustment is disabled when Blue Light Reducer is activated.
*
ENGLISH
OPERATING THE MONITOR 17
Image Adjust
Adjustment Item Problem / Option Button to Press
Sharpness
Video Mode Adjust *
ENGLISH
* Only HDMI/DisplayPort input.
Language
Adjustment Item Problem / Option Button to Press
Language
1 2 3 4 5
You can change the picture quality from 1 to 5
(sharp to soft).
Press the
numerical order. Press the
picture quality in reverse numerical order.
Full Screen
Aspect Ratio
English
Français French
Deutsch
Italiano Italian
Polski Polish
Español Spanish
Button to change the picture quality in
Expansion display
Expansion display of Aspect
English
German
Button to change the
Nederlands
Ĉesky
Dutch
Czech
Russian
Japanese
Simplifi ed Chinese
18 OPERATING THE MONITOR
Setup
Adjustment Item Problem / Option Button to Press
OSD Position
OSD Time Out
Opening Logo
Auto Power - Off
NOTE
The Auto Power - Off function is enabled as default setting. Monitor will turn off
automatically after 3 hours without any key operation.
If you prefer to use the monitor over 3 hours continuously, please disable The Auto
Power - Off function.
FreeSync *
* Only DisplayPort input.
H.Position
V.Position
You can set the OSD display duration time between
5 and 30 seconds.
Off
On
Off
On
Off
On
OSD is too left
OSD is too right
OSD is too low
OSD is too high
iiyama Logo does not display when the monitor is
turned on.
iiyama Logo displayed when the monitor is turned on.
Auto Power - Off function is turned Off .
Enable the Auto Power - Off function.
FreeSync function is turned Off .
Enable the FreeSync function.
ENGLISH
OPERATING THE MONITOR 19
Display Information
Display Information
1920x1080 @60Hz
Displays information regarding the current input signal coming from the graphic card in
your computer.
See your graphic card user guide for more information about changing the
NOTE
resolution and refresh.
ENGLISH
Reset
Adjustment Item Problem / Option Button to Press
Reset All
20 OPERATING THE MONITOR
Return to Menu.
No
Factory-preset data is restored.
Yes
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the front button ENTER for about 10 seconds. If you
try to access the OSD by pressing any of the buttons, message "OSD Locked" will appear on the
screen.
2. The OSD lock will be deactivated by pressing the front button ENTER again for about 10 seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the front button for about 10 seconds.
Locking the power switch means that won't be able to turn off the Monitor while the power switch
is locked. If presses the power switch message "Power Button Locked" will appear on the screen.
2. The power switch lock will be deactivated by pressing the front button
seconds.
again for about 10
ENGLISH
OPERATING THE MONITOR 21
POWER MANAGEMENT FEATURE
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
The power management feature of this product complies with power saving requirement of ENERGY
®
STAR
and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off , the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
ENGLISH
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
NOTE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
22 OPERATING THE MONITOR
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
The picture does
not appear.
The Power Cable is fi rmly seated in the socket.
(Power indicator
does not light up.)
(Power indicator
is blue.)
(Power indicator
is orange.)
The screen is not
synchronized.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
ENGLISH
TROUBLE SHOOTING 23
Problem Check
The screen is
shaking.
No sound.
The sound is too
loud or too quiet.
ENGLISH
A strange noise is
heard.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The Audio Cable is properly connected.
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
24 TROUBLE SHOOTING / RECYCLING INFORMATION
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS : ProLite XUB2792QSU
Size Category 27"
Panel technology
Size Diagonal: 27" (68.5cm)
LCD
Panel
Pixel pitch 0.233mm H × 0.233mm V
Brightness 350cd/m
Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Response time 5ms (Gray to Gray)
Display Colors 1.07 Billion
Sync Frequency
Native Resolution 2560 × 1440, 3.7 MegaPixels
Support max. resolution
Input Connector DVI-D 24 pin, HDMI, DisplayPort
Plug & Play VESA DDC2B
Input Video Signal
USB Standard USB3.0
Number of USB Ports
Connector shape
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Output Audio Connector ø 3.5mm mini jack (Stereo)
Speakers 2W × 2 (Stereo speakers)
Maximum Screen Size 596.7mm W × 335.7mm H / 23.5" W × 13.2" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption*
Dimensions / Net Weight
Tilt Angle
Environmental
Considerations
Approvals
IPS Panel Technology
2
(Typical)
Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical)
DVI: Horizontal: 30.0-89.0kHz, Vertical: 55-75Hz
HDMI: Horizontal: 30.0-89.0kHz, Vertical: 55-75Hz
DisplayPort(without FreeSync): Horizontal: 30.0-89.0kHz, Vertical: 50-75Hz
DisplayPort(with FreeSync): Horizontal: 30.0-115.0kHz, Vertical: 48-70Hz
DVI: 2560 × 1440 60Hz
HDMI: 2560 × 1440 60Hz
DisplayPort(without FreeSync): 2560 × 1440 70Hz
DisplayPort(with FreeSync): 2560 × 1440 70Hz
TM
DVI (Digital Visual Interface Standard Rev.1.0) compliance
HDMI, DisplayPort
1 Upstream : Series B
2 Downstream : Series A
33W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: B
611.0× 397.0 - 527.0 × 230.0mm / 24.1 × 15.6 - 20.7 × 9.1" (W×H×D)
6.1kg / 13.44lbs
Upward: 22 degrees Downward: 5 degrees, Left/Right: 45 degrees each
Operating:
Storage:
TCO Certifi ed,
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
CE, TÜV-GS, CU, ENERGY
STAR
ENGLISH
®
NOTE
*
Audio/USB equipment is not connected.
APPENDIX 25
SPECIFICATIONS : ProLite XU2792QSU
Size Category 27"
Panel technology
Size Diagonal: 27" (68.5cm)
LCD
Panel
Pixel pitch 0.233mm H × 0.233mm V
Brightness 350cd/m
Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Response time 5ms (Gray to Gray)
Display Colors 1.07 Billion
ENGLISH
Sync Frequency
Native Resolution 2560 × 1440, 3.7 MegaPixels
Support max. resolution
Input Connector DVI-D 24 pin, HDMI, DisplayPort
Plug & Play VESA DDC2B
Input Video Signal
USB Standard USB3.0
Number of USB Ports
Connector shape
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Output Audio Connector ø 3.5mm mini jack (Stereo)
Speakers 2W × 2 (Stereo speakers)
Maximum Screen Size 596.7mm W × 335.7mm H / 23.5" W × 13.2" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption*
Dimensions / Net Weight
Tilt Angle Upward: 22 degrees Downward: 5 degrees
Environmental
Considerations
Approvals
IPS Panel Technology
2
(Typical)
Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical)
DVI: Horizontal: 30.0-89.0kHz, Vertical: 55-75Hz
HDMI: Horizontal: 30.0-89.0kHz, Vertical: 55-75Hz
DisplayPort(without FreeSync): Horizontal: 30.0-89.0kHz, Vertical: 50-75Hz
DisplayPort(with FreeSync): Horizontal: 30.0-115.0kHz, Vertical: 48-70Hz
DVI: 2560 × 1440 60Hz
HDMI: 2560 × 1440 60Hz
DisplayPort(without FreeSync): 2560 × 1440 70Hz
DisplayPort(with FreeSync): 2560 × 1440 70Hz
TM
DVI (Digital Visual Interface Standard Rev.1.0) compliance
HDMI, DisplayPort
1 Upstream : Series B
2 Downstream : Series A
33W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: B
611.0× 442.0 × 196.5mm / 24.1 × 17.4 × 7.7" (W×H×D)
4.5kg / 9.92lbs
Operating:
Storage:
TCO Certifi ed,
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
CE, TÜV-GS, CU, ENERGY
STAR
®
*
NOTE
26 APPENDIX
Audio/USB equipment is not connected.
DIMENSIONS : ProLite XUB2792QSU
611.0mm/24.1”
605.5mm/23.8”
341.0mm/13.4”
371.5mm/14.6”
54.0mm/2.1”
( ) : Maximum adjustment range
DIMENSIONS : ProLite XU2792QSU
611.0mm/24.1”
605.5mm/23.8”
341.0mm/13.4”
54.0mm/2.1”
371.5mm/14.6”
397.0mm/15.6”(527.0mm/20.7”)
442.0mm/17.4”
230.0mm/9.1”
300.0mm/11.8”
ENGLISH
196.5mm/7.7”
196.5mm/7.7”
APPENDIX 27
COMPLIANT TIMING
VESA
ENGLISH
NOTE
Video Mode
Horizontal
Frequency
Vertical
Frequency
Dot Clock
VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz
SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz
XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
UXGA 1600 × 1200 75.000kHz 60.000Hz 162.000MHz
WSXGA+ 1680 × 1050 65.290kHz 60.000Hz 146.250MHz
Full HD 1920 × 1080 66.590kHz 59.930Hz 138.500MHz
WQHD 2560 × 1440
*1 DVI : Use the DVI-D dual-link signal cable.
2
DisplayPort input only.
*
88.787kHz 59.951Hz 241.500MHz *
104.045kHz 69.923Hz 274.680MHz *
1
2
28 APPENDIX
M174B21
Loading...