USER MANUAL
HM903DT
A902MT-v
ENGLISH
ENGLISH
DEUTSCH
TABLE OF CONTENTS
FOR YOUR SAFETY............................................................
SAFETY PRECAUTIONS............................................
CUSTOMER SERVICE................................................
CLEANING...................................................................
BEFORE YOU OPERATE THE MONITOR..........................
FEATURES..................................................................
ACCESSORIES...........................................................
FOR WINDOWS 95/98/ME/2000 USERS.......................
LOCATION OF CONTROLS........................................
CONNECTING YOUR MONITOR..................................
OPERATING THE MONITOR................................................
ADJUSTMENT MENU CONTENTS
POWER MANAGEMENT FEATURE.............................
SELF DIAGNOSIS FUNCTION........................................
TROUBLE SHOOTING........................................................
APPENDIX............................................................................
SPECIFICATIONS.......................................................
PRESET MODES.........................................................
CONNECTOR PIN ASSIGNMENT.................................
..............................
13
13
14
16
16
17
17
FRANCAIS
1
1
3
3
4
4
4
4
5
6
7
8
NEDERLANDS
SVENSKA
ITALIANO
Thank you very much for choosing the iiyama Vision Master color monitor.
We recommend that you take a few minutes to read carefully through this brief but comprehensive
manual before installing and switching on the monitor. Please keep this manual in a safe place
for your future reference.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product
developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and
also to the further development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation
ENGLISH
of goods and services to the environment. The main problem, as far as computers and other electronics
equipment are concerned, is that environmentally harmful substances are used both in the products and
during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics
equipment, most of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important
from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing
emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left
running continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The
Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society
for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of
electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product
must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must
be adhered to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of
electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): development@tco.se
Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet,
using the address: http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose
is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can
consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame
retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants
containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including
reproductive damage in fish-eating birds and mammals, due to the bio-accumulative
retardants have been found in human blood and researchers fear that disturbances in foetus development
may occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not
contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the
printed circuit boards since no substitutes are available.
*
processes. Flame
ENGLISH
Cadmium
**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer
displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99
requirement states that batteries, the colour-generating layers of display screens and the electrical or
electronics components must not contain any cadmium.
**
Mercury
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic
in high doses. The relevant TCO’99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components associated with the
labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs
break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on
earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
**
Lead
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous
system and in higher doses, causes lead poisoning. The relevant TCO’99 requirement permits the inclusion
of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
FCC DECLARATION OF CONFORMITY
Model Number: HM903DT / A902MT-v
Trade Name: iiyama
Responsible party: Iiyama North America, Inc.
Address: 1560 Brookhollow Drive, Suite 208, Santa Ana, CA 92705 U.S.A.
Telephone number: 714-437-5111
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This equipment generates, uses and
ENGLISH
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If you determine the equipment does cause harmful interference to radio or
television reception (this may be determined by monitoring the interference while turning the equipment off
and on), you are encouraged to try to correct the interference by one of the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and receiver.
n Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
n Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, the specified signal cables below should be used.
Signal Cable MB30 (Enclosed): 242Z013-01
Signal Cable MB31 (Optional): 242Z017-01
CAUTION Changes or modifications not expressly approved by iiyama could void the users authority
to operate the equipment under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
as set out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This Color Data Monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive”
and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the
buildings. All places of operation are characterized by their connection to the public low voltage power supply
system.
n We reserve the right to change specifications without notice.
n All trademarks used in this user manual are the property of their respective owners.
n As an E
NERGY STA R
energy efficiency.
®
Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous
and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use the monitor where water may be splashed or spilt on the monitor as it may cause fire
or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage
will cause malfunction and may cause fire or electric shock.
ENGLISH
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as
it may cause electric shock.
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, or dusty or
smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where
the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
FOR YOUR SAFETY 1
CAUTION
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the cabinet bottom will
be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cables are disconnected. If you do not disconnect them, it may cause fire or electric shock.
It is recommended that two people are used when moving the monitor.
ENGLISH
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
DO NOT PUT FLOPPY DISKS NEAR THE MONITOR
Magnetic data recordings such as on a floppy disk may disappear if they are placed on or near the
monitor as the degauss circuit causes a strong momentary magnetic field.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24
inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break
every hour is recommended as looking at the screen continuously can cause eye strain.
MAGNETIC FIELD INFLUENCE
Place the monitor away from TV, speaker systems or any other source of strong magnetic fields.
The monitor may be noisy or the screen's output may be distorted as a result of interference from
other appliances.
2 FOR YOUR SAFETY
OTHERS
ATTENTION FOR USING THE OPQ FUNCTION
For HM903DT: Due to the nature of the Diamondtron M2-CRT, misconvergence, misalignment of the
aperture grille, picture shaking or burn-in of phosphors may happen when displaying a high-white
picture for a long time while the OPQ function is active.
Turn OFF the OPQ function when displaying anything other than DVD or other moving pictures.
OPTIMUM PICTURE FOR THE OPQ FUNCTION
1. Text mode
n Word processor and spreadsheet
n Text and a like
2. Picture mode
n Still picture
3. Movie mode
n Moving picture (DVD / TV)
When you select the Picture or Movie mode within the OPQ function, and use a word
NOTE
processor or display text and a like then your eyes maybe subject to fatigue. This will be
because the right side of characters will appear stretched, bright and slightly out of
focus. This is normal because the mode you have selected is designed for still or moving
pictures. To reduce fatigue use the Text mode or take a short break.
(=Optimize Picture Quality)
CUSTOMER SERVICE
NOTE
n
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
ENGLISH
CLEANING
WARNING
CAUTION
NOTE
CABINET
CRT
If you drop any materials or liquids such as water into the monitor when cleaning,
n
unplug the power cable immediately and contact your dealer or iiyama service
center.
For safety reasons, turn off the power switch and unplug the monitor before you
n
clean it.
The CRT screen is protected by an anti-reflection & anti-static coating. Do not
n
scratch or rub the screen with a hard object, as this could damage the coating.
Never use any of the following strong solvents. These will damage the cabinet and
n
the CRT.
Thinner
Benzine
Abrasive cleaner
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
It is recommended that a soft clean cloth be used to remove smudges (such as
fingerprints) from the CRT.
Spray-type cleaner
Wax
Acid or Alkaline solvent
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
The stand functions as a hub when connected to a USB compliant computer and USB peripherals.
However, with older operating systems and/or BIOS settings in your computer, the USB hub may
not operate. In this case, please contact your computer dealer first for advice.
FEATURES
K HM903DT: High Brightness
®
K Crisp, Clear Display for Windows
K Supports Resolutions up to 1920×1440
K Supports Refresh Rate up to 102Hz at 1600×1200
ENGLISH
K Windows
®
95/98/Me/2000 Plug & Play Compliant
K Supports sRGB International Standard
K Power Management (E
NERGY STA R
K Space Saving, Compact Case Design
K Ergonomic Design: TCO ’99 and MPR 3 Approved
K USB Hub Function & Stereo Speakers
ACCESSORIES
The following accessories should be included in the Vision Master packaging. Please ensure that
all of them are enclosed.
or Macintosh
®
and VESA DPMS Compliant)
n Power Cable*
n Signal Cable MB30 (For D-Sub connection)
n USB Cable SU41
n Audio Cable AD21 (RCA to mini jack)
n User Manual
CAUTION
* TO USERS IN 120V AREA
The rating of the Power Cable enclosed in 120V area is 10A / 125V. If you are using
a power supply higher than this
250V must be used.
rating, then a power cable with a rating of 10A /
FOR WINDOWS 95/98/ME/2000 USERS
Windows 95/98/Me/2000 Monitor Information File for iiyama monitors may be obtained via the
Internet, using the address: http://www.iiyama.com (U.S.A.)
http://www.iiyama.co.uk (U.K.)
NOTE
4 BEFORE YOU OPERATE THE MONITOR
n
For additional information on how to download the driver for your monitor, please
access one of the internet sites noted above.
LOCATION OF CONTROLS
Front
MENU
VIDEO 1/2
Back
Speakers
A
The volume control is performed with the
On Screen Display. Press the /
Buttons and then the Menu Button
continuously when the Menu is not
displayed.
Power Indicator
B
Input Select Button (VIDEO 1/2)
C
Select either VIDEO IN 1 or 2 for the signal
input when both of the signal inputs are
connected to a signal source. Switch
VIDEO IN 1 and 2 whenever pressing Input
Select Button for 3-4 seconds.
When only one of the two signal
NOTE
inputs is connected to the signal
source, the one connected is
automatically selected. Input
Select Button is not available if
there is no signal input from the
selected connector or during the
power management mode.
Four Directional Button / / /
D
Menu Button (MENU)
E
ENGLISH
D-sub mini 15pin Connector (VIDEO IN 1)
F
D-sub mini 15pin Connector (VIDEO IN 2)
G
AC Connector (AC IN)
H
2
P
O
W
E
R
N
I
O
E
D
I
V
1
N
I
O
E
D
I
V
N
I
C
A
N
I
O
I
D
U
A
P
U
Audio Connector (AUDIO IN)
I
USB-UP
J
Connect with a USB compliant computer
by the USB Cable attached to the monitor.
USB-DOWN
K
Connect any cables from USB compliant
peripherals such as mouse, keyboard, etc.
Headphone Connector
L
Power Switch (POWER)
M
BEFORE YOU OPERATE THE MONITOR 5
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
A
Connect the computer to the monitor with the signal cable. (See page 17 for CONNECTOR PIN
B
ASSIGNMENT.)
Connect the monitor to the audio equipment with the Audio Cable when using the audio
C
features.
Connect the monitor to the USB compliant computer with the USB Cable when using the USB
D
hub features.
Connect the Power Cable to the monitor first and then to the power supply.
E
NOTE n The signal cables used for the connection vary by the type of computers you use. An
ENGLISH
[Example of Connection]
incorrect connection may cause serious damage to both the monitor and the computer.
The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a
special cable is required please contact your local iiyama dealer or regional iiyama
office.
n For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
n Make sure you tighten the finger screws at each end of the signal cable.
P
O
W
E
R
Mouse
Keyboard
6 BEFORE YOU OPERATE THE MONITOR
Printer
2
N
I
O
E
D
I
V
1
N
I
O
E
D
I
V
N
I
C
A
N
I
O
I
D
U
A
P
U
Power Cable
(Accessory)
Signal Cable MB30
(Accessory)
Audio Cable AD21
(Accessoy)
USB Cable SU41
(Accessory)
Computer
OPERATING THE MONITOR
The iiyama Vision Master has been preset at the factory with the signal timings listed on page 17
in
PRESET MODES to create the best picture. If an incorrect picture appears during the operation,
adjust the image by following the procedure below to get the desired picture.
After selecting an item in the Main Menu, the adjustments and settings
are made in the Sub-Menu.
Main Menu appears on the screen when you press the Menu
(
Button.
For example, to adjust the horizontal screen size, select
B
(Screen Control) on the Main Menu by using the / Buttons.
The Sub-Menu appears when you press the Menu Button.
ENGLISH
Menu
Adjustment icon
Adjustment menu
presently selected
Select (H-Size) on the Sub-Menu by using the / Buttons.
C
Screen Control
RB
FUNC
IN 1
Signal input connector
presently selected
An adjustment scale will turn white when you press the Menu
Button. Use the / Buttons to adjust the horizontal screen size.
The vertical screen size adjustment can be also made on this screen
by using the / Buttons. See ADJUSTMENT MENU CONTENTS on
next pages for further information.
Screen Control
Adjustment icon
Adjustment menu
presently selected
The line shows the
progress of the
adjustment being
made.
NOTE
The On Screen Display disappears in optional setting seconds after you stop pressing the
n
buttons while performing an adjustment. (See page 11 for OSD Off Timer.)
Adjustments for Size, Position, Pin-Cushion and Trapezoid are saved for each signal timing.
n
Except for these adjustments, all other adjustments such as Color, Parallelogram, Convergence,
Moire, and Landing have only one setting which applies to all signal timings.
H-Size
|||||||||||||||||||||||||
V-Size
|||||||||||||||||||||||||
·························
·························
50
50
OPERATING THE MONITOR 7
ADJUSTMENT MENU CONTENTS
Direct
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
l Volume Control: Press the / Buttons and then the Menu Button continuously when
the Menu is not displayed.
l Contrast/Brightness: Press the / Buttons when the Menu is not displayed.
l OPQ: Press the / Buttons when the Menu is not displayed.
NOTE
n
SWITCHING CONTRAST/BRIGHTNESS AND VOLUME CONTROL
To switch between Contrast/Brightness and Volume Control, press the Menu Button
ENGLISH
within 2 seconds after pressing the Four Directional Button during the direct adjustments
above.
n
The On Screen Display disappears approx. 3 seconds after you stop pressing the
buttons while performing the direct adjustment, irrespective of OSD Off Timer setting.
(See page 11 for OSD Off Timer.)
NOTE
Color
Control
Sub-MenuMain Menu
Volume Control
Only available on Direct adjustment.
Contrast
Brightness
COLOR
NOTE
sRGB
Procedure
n To access the sRGB mode, select the Color Temp. function and select 10000K by
n To deactivate the sRGB mode, push the button while the Color Temp. is selected.
NOTE
Color Temp.
Color temperature is adjustable sRGB and between approximately 10000K
and 4500K. The factory preset is 9300K.
pushing the button. Hold down the button & sRGB function will be activated.
When this mode is activated the color temperature is approximately 6500K.
n sRGB is an international standard which defines and unifies the
difference of color appearance between equipment.
n You can not adjust the Contrast, Brightness, OPQ and Gamma Correction
during sRGB mode because those settings are locked.
Direct
Direct
Direct
Problem / Option Button to Press
Too soft
Too loud
Too dull
Too intense
Too dark
Too bright
Reddish white
Bluish white
Return to Menu
8 OPERATING THE MONITOR
Return to Main Menu.
Main Menu
Sub-Menu
Problem / Option Button to Press
Screen
Control
Shape
Zoom
H-Size
V-Size
H-Position
V-Position
Return to Menu
Pin-Cushion
Trapezoid
Parallelogram
Pin-Balance
Too small
Too large
Too small
Too large
Too small
Too large
Too far to the left
Too far to the right
Too low
Too high
Return to Main Menu.
To correct distortion
To correct distortion
To correct distortion
To correct distortion
ENGLISH
Tilt
Return to Menu
To correct tilt
Return to Main Menu.
OPERATING THE MONITOR 9
Sub-MenuMain Menu
VIDEO
Problem / Option Button to Press
Picture
Quality
ENGLISH
H-Convergence
V-Convergence
H-Moire
NOTE
Moiré is the result of interference between the phosphor layout and the
video signal. By changing the horizontal and vertical size, the moiré can
be reduced. You may find the moiré more noticeable depending on the
Desktop Pattern you select. In this case, change the desktop pattern. If
moiré is still noticeable, use this function to reduce the effect. The picture
may shake if extreme moiré correction is performed.
VIDEO
Direct
NOTE
OPQ
See page 8 for Direct adjustment.
Text
Picture
Movie
Gamma Correction
Degauss
NOTE
Degauss should not be
repeated continuously. Wait at least
30 minutes between degaussing
operations. While degaussing, the
picture shakes and a low sound
occurs but this does not indicate a
problem, it is normal.
To correct misconvergence
for vertical lines
To correct misconvergence
for horizontal lines
To correct vertical
wavy lines
Word processor, spreadsheet, text and a like
Still picture
Moving picture (DVD / TV)
Midtone color is too dark
Midtone color is too bright
Every time the monitor is switched on, the
monitor is automatically degaussed. But
occasionally the colors change when
moving or swiveling the monitor. In this case,
first select Degauss. If the problem persists,
perform the Landing adjustments.
Return to Menu
10 OPERATING THE MONITOR
Return to Main Menu.
Main Menu
Sub-Menu
Problem / Option Button to Press
Landing
Function
Top-Left
Top-Right
Bottom-Left
Bottom-Right
To correct discoloration
To correct discoloration
To correct discoloration
To correct discoloration
Return to Menu Return to Main Menu.
OSD H-Position
OSD V-Position
OSD Off Timer
Too far to the left
Too far to the right
Too low
Too high
3 5 15 30 45 sec
You can set the OSD display time to any
one of the above 5 settings.
Language
Lockout
English
Deutsch
Français
Nederlands
Svenska
Japanese
On
English
German
French
Dutch
Swedish
Japanese
All adjustment items except this function
are locked out.
Of f Lockout is canceled.
ENGLISH
OPERATING THE MONITOR 11
Main Menu
Function
Sub-Menu
Save Recall
Auto
NOTE
Reset
Option
Any changes are automatically saved in
the memory when the On Screen Display
disappears.
Turning off the power should be avoided while
using the Menu.
Factory-preset data is restored.
ENGLISH
Help
Return to Menu
Help
Information
Return to Menu
NOTE
On
Off
Performing this operation resets any adjustment
data made by the user to the factory-preset
frequencies. The following settings made by the
user for signals other than the factory-preset
timings remain unchanged.
H-Size V-Size Pin-Cushion
H-Position V-Position Trapezoid
Return to Main Menu.
Every time you select the sub-menu icon,
the online balloon help appears to indicate
the menu contents or adjustment procedure.
The online balloon help is off.
The model name, the serial number and
the current horizontal scan frequency
and vertical refresh rate is displayed.
Return to Main Menu.
12 OPERATING THE MONITOR
POWER MANAGEMENT FEATURE
The power management feature of this product complies with every power saving requirement of
ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power
consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management
function, including any timer settings is configured by the operating system. Check your operating
system manual for information on how this can be configured.
Power Management Mode
n
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 3W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in 10 seconds when either the keyboard or the mouse
are touched again.
NORMAL MODE
Power Indicator
Green
ENGLISH
NOTE
POWER MANAGEMENT MODE
Even when using the power management mode, the monitor consumes electricity.
n
Orange
POWER
CONSUMPTION
0 3 W 100%
Turn off the Power Switch whenever the monitor is not used, during the night and
weekends, to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync signal
n
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
If two separate computers are connected to the monitor, one to the VIDEO IN 1 input
n
connector and the other to the VIDEO IN 2 input connector, the POWER MANAGEMENT
feature will work only if both computers meet the conditions described above.
SELF-DIAGNOSIS FUNCTION
The monitor has a self-diagnosis function. The monitor diagnoses itself automatically when the
picture does not appear and the power indicator is green or orange because of the failure of
computer or monitor.
Procedure
n
Disconnect the signal cable of the computer or turn OFF the computer.
A
Turn ON the monitor.
B
Diagnosis
n
A color bar picture is displayed:
A
The monitor is working normally. Check the computer.
A color bar picture is not displayed:
B
The monitor may be damaged. Contact your dealer or iiyama service center.
OPERATING THE MONITOR 13
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1.
Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have.
2. Consult the following charts if you cannot find an appropriate adjustment item in OPERATING
THE MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
The picture does
A
not appear.
(Power indicator
does not light up.)
ENGLISH
(Power indicator
is green.)
(Power indicator
is orange.)
The screen is not
B
synchronized.
The Power Cable is firmly seated in the socket.
o
The Power Switch is turned ON.
o
The AC socket is live. Please check with another piece of equipment.
o
See page 13 for SELF-DIAGNOSIS FUNCTION.
o
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
o
Increase the Contrast and/or Brightness.
o
The computer is ON.
The Signal Cable is properly connected.
o
o
The signal timing of the computer is within the specification of the
monitor.
See page 13 for SELF-DIAGNOSIS FUNCTION.
If the monitor is in power management mode, touch the keyboard or the
o
mouse.
The computer is ON.
o
The Signal Cable is properly connected.
o
The signal timing of the computer is within the specification of the
o
monitor.
The Signal Cable is properly connected.
o
The signal timing of the computer is within the specification of the
o
monitor.
The video output level of the computer is within the specification of the
o
monitor.
The screen
C
position is not in
the center.
The screen is
D
too bright or too
dark.
The screen is
E
shaking.
14 TROUBLE SHOOTING
The signal timing of the computer is within the specification of the
o
monitor.
The video output level of the computer is within the specification of the
o
monitor.
The screen may be too bright due to the video output level difference of
the computer. In this case, adjust the Contrast.
o
Check if there are any sources of strong magnetic fields such as TV,
speakers, etc. nearby.
If yes, remove them from the area of the monitor or change the position/
direction of the monitor to avoid magnetic field interference.
o
The power voltage is within the specification of the monitor.
o
The signal timing of the computer is within the specification of the
monitor.
o
Moiré correction is working properly.
Normal phenomenon on ‘Diamondtron M2/NF-CRT’ monitors
Misalignment of Aperture Grille
Due to the nature of the Diamondtron M2/NF-CRT, in rare cases, a misalignment of the aperture grille
may happen by the shock or vibration caused during transportation. If a black vertical line appears
on the screen, apply a light shock to the side of the monitor with your hand. If the problem persists,
follow the procedure below.
Display a full white picture and inspect the problem area.
A
Display a high-white picture that covers the problem area to shoot a strong electron beam.
B
Leave it for a while, until the problem disappears.
Damper Wires
The two faint horizontal lines that may be visible on the screen are actually the shadows of steel
wires called
structural reasons.
Damper Wires. All Diamondtron M2/NF-CRT based monitors have these wires for
ENGLISH
TROUBLE SHOOTING 15
APPENDIX
SPECIFICATIONS
CRT
19" (18.0" / 46cm viewable), Aperture Grille pitch Center: 0.25mm,
Edges: 0.27mm, 90 degree deflection, Short persistence phosphor,
Anti-reflection & Anti-static coating
HM903DT: Diamondtron M2-CRT
A902MT-v: Diamondtron NF-CRT
Sync Frequency
Video Bandwidth
Horizontal: 30.0-130.0kHz, Vertical: 50-200Hz
345MHz dot clock
Recommended Resolution 1280 × 1024 at 85Hz
Input Connectors
Plug & Play
ENGLISH
Input Sync Signal
D-Sub mini 15pin × 2
VESA DDC2B™
Separate sync: TTL, Positive or Negative
Composite sync*1: TTL, Positive or Negative
Sync on green*1: 0.3Vp-p, Negative
Input Video Signal
Number of Signal Storage
Analog: 0.7Vp-p (Standard), 75Ω, Positive
Factory-presets: 7, User defined settings: 9 maximum
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 0.7Vrms maximum
Speakers 1W × 2 (Stereo speakers)
Headphone Connector ø 3.5mm mini jack (Stereo)
Standard Screen Size 360mm W × 270mm H / 14.2" W × 10.6" H
USB Standard
Connectors
Number of USB Ports
Power Source
Power Consumption
Rev. 1.1 compliance Self-powered hub
Upstream: Series B, Downstream: Series A
1 Upstream (For computer), 4 Downstream (For peripherals)
100-230VAC, 50/60Hz, 1.55-0.68A
145W maximum in normal use
Power management mode: 3W maximum*
Dimensions, Net Weight
Tilt-Swivel Angle
Environmental
Considerations
Approvals
450 × 450 × 447mm / 17.7 × 17.7 × 17.6" (W × H × D), 24kg / 52.9lbs
Right / Left: 45 degrees each, Up: 11 degrees, Forward: 5 degrees
Operating: Temperature
Humidity
Storage: Temperature
Humidity
0 to 35°C / 32 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 90% (No condensation)
TCO ’99, CE, TÜV-GS / MPR3(prEN50279) / ISO 9241-3/ISO 9241-7/
ISO 9241-8, PTB, FCC-B, UL/C-UL, DHHS, Department of Health (Canada)
*1 The picture may not be displayed normally depending on the type of signal of a computer system.
NOTE
*2 Condition: USB peripherals or audio equipment are not connected.
450mm/17.7"
366mm/14.4"
2
447mm/17.6"
16 APPENDIX
450mm/17.7"
274.5mm/10.8"
382.5mm/15.1"
67.5mm/2.7"
PRESET MODES
The following chart indicates the Factory Preset Modes.
VESA Timing Name
640×480 @60Hz
640×480 @85Hz
2
800×600 @85Hz
3
4
1024×768 @85Hz
1280×1024 @85Hz
5
1600×1200 @85Hz
6
1920×1440 @85Hz
7
Additional adjustments may be required to the factory-presets, because the signal
NOTE
timings vary depending on the type of graphics board you use.
Horizontal
Frequency
31.47kHz 59.9Hz Negative1
43.27kHz Negative
53.67kHz 85.1Hz Positive
68.68kHz
91.15kHz 85.0Hz Positive
Vertical
Frequency
85.0Hz
85.0Hz
Positive
CONNECTOR PIN ASSIGNMENT
D-Sub mini 15pin
Connector
Pin Input Signal
1
Red video
2
Green video / Sync on green
Blue video
3
4
5
6
Red video ground
7
Green video ground
8
Blue video ground
Pin
9
10
11
12
13
14
15
Input Signal
Ground
Ground
Data line (SDA) *
H-Sync / HV-Sync
V-Sync
Clock line (SCL) *
* Compliant to VESA DDC.
Sync Polarity
H
Negative
Negative
Positive
Positive
Positive
PositivePositive85.0Hz 106.25kHz
PositivePositive85.0Hz 128.52kHz
V
ENGLISH
APPENDIX 17
Loading...