USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3288UH
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com
You can access the Web page of different countries from there.
ENGLISH
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
ENGLISH
TABLE OF CONTENTS |
|
FOR YOUR SAFETY............................................................................ |
1 |
SAFETY PRECAUTIONS................................................................ |
1 |
SPECIAL NOTES ON LCD MONITORS.......................................... |
3 |
CUSTOMER SERVICE.................................................................... |
3 |
CLEANING....................................................................................... |
3 |
BEFORE YOU OPERATE THE MONITOR........................................... |
4 |
FEATURES...................................................................................... |
4 |
CHECKING THE CONTENTS OF THE PACKAGE......................... |
4 |
INSTALLATION................................................................................ |
5 |
FITTING AND REMOVAL OF BASE................................................ |
6 |
CONTROLS AND CONNECTORS.................................................. |
7 |
CONNECTING YOUR MONITOR.................................................... |
8 |
COMPUTER SETTING.................................................................... |
9 |
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE ............... |
9 |
OPERATING THE MONITOR............................................................. |
10 |
ADJUSTMENT MENU CONTENTS............................................... |
11 |
POWER MANAGEMENT FEATURE............................................. |
20 |
TROUBLE SHOOTING....................................................................... |
21 |
RECYCLING INFORMATION............................................................. |
22 |
APPENDIX ......................................................................................... |
23 |
SPECIFICATIONS......................................................................... |
23 |
DIMENSIONS................................................................................ |
24 |
COMPLIANT TIMING..................................................................... |
24 |
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.
ENGLISH
FOR YOUR SAFETY 1
ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fingers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifically designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE |
When you first turn on the LCD monitor, the picture may not fit in the display area |
|
|
because of the type of computer that is used. In this case, adjust the picture position to |
|
|
the correct position. |
|
|
You may find slightly uneven brightness on the screen depending on the desktop |
|
|
pattern you use. |
|
|
Due to the nature of the LCD screen, an afterimage of the previous screen may remain |
|
|
after switching the image, when the same image is displayed for hours. In this case, the |
ENGLISH |
|
screen can be recovered slowly by changing the image or turning off the Power Switch |
|
|
|
|
|
for some hours. |
|
CUSTOMER SERVICE
NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.
CLEANING
WARNING |
If you drop any materials or liquids such as water into the monitor when cleaning, |
||
|
|
|
unplug the power cable immediately and contact your dealer or iiyama service center. |
|
|
|
For safety reasons, turn off the power switch and unplug the monitor before you |
CAUTION |
|
||
|
|
|
clean it. |
|
|
To protect the LCD panel, do not scratch or rub the screen with a hard object. |
|
NOTE |
Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.
Thinner |
Spray-type cleaner |
Benzine |
Wax |
Abrasive cleaner |
Acid or Alkaline solvent |
Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.
CABINET |
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. |
|
Then wipe the cabinet with a soft dry cloth. |
LCD |
Periodic cleaning with a soft dry cloth is recommended. |
SCREEN |
Don't use tissue paper etc. because these will damage the LCD screen. |
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
|
Supports Resolutions up to 3840 × 2160 |
|
|
High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness |
|
|
|
300cd/m2 (Typical) / Quick Response Time 3ms (Gray to Gray) |
|
Flicker - Free |
|
ENGLISH |
Blue Light Reducer |
|
|
Stereo Speakers |
|
|
|
Digital Character Smoothing |
|
|
2 × 3W Stereo Speakers |
|
|
|
|
|
|
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant Keyhole for Security Lock
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
Power Cable* |
HDMI Cable |
DisplayPort Cable |
|
USB Cable |
Stand-Base with a screw |
Safety Guide |
|
Quick Start Guide |
|
||
|
|
|
|
CAUTION |
* |
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using |
|
|
|
a power supply higher than this rating, then a power cable with a rating of 10A/ |
|
|
|
250V must be used. However, all guarantees and warranties are void for any |
|
|
|
problems or damage caused by a power cable not supplied by iiyama. |
|
|
|
An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be |
|
|
|
used. |
|
4 BEFORE YOU OPERATE THE MONITOR
INSTALLATION
WARNING Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and the mount.
[WALL MOUNTING]
WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 12mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor.
Screw
Mounting Stage
ENGLISH
L Chassis
[ROTATING THE MONITOR]
This monitor can only be used in landscape. Do not rotate or operate the monitor in any other orientation than landscape.
Available
A
Landscape
Power Indicator
A
Portrait
Not Available
Power Indicator
A |
A |
|
Power Indicator |
BEFORE YOU OPERATE THE MONITOR 5