iiyama ProLite LE3240S-B2 User Manual

USER MANUAL

ENGLISH

Thank you very much for choosing the iiyama LCD display.

We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the display. Please keep this manual in a safe place for your future reference.

ENGLISH

CE MARKING DECLARATION OF CONFORMITY

This LCD display complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands

Model No. : PL3240/PL4340/PL4840/PL5540

ENGLISH

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com

You can access the Web page of different countries from there.

We reserve the right to change specifications without notice.

All trademarks used in this user manual are the property of their respective owners.

ENGLISH

TABLE OF CONTENTS
FOR YOUR SAFETY............................................................................	1
SAFETY PRECAUTIONS................................................................	1
SPECIAL NOTES ON LCD DISPLAYS............................................	3
CUSTOMER SERVICE....................................................................	5
CLEANING.......................................................................................	5
BEFORE YOU OPERATE THE DISPLAY.............................................	6
FEATURES......................................................................................	6
CHECKING THE CONTENTS OF THE PACKAGE.........................	6
UNPACKING : ProLite LE5540S......................................................	7
CONTROLS AND CONNECTORS : DISPLAY................................	8
INSTALLATION..............................................................................	10
CONTROLS AND CONNECTORS : REMOTE CONTROL...........	11
PREPARING THE REMOTE CONTROL.......................................	12
BASIC OPERATION......................................................................	14
CONNECTING YOUR THE DISPLAY............................................	17
COMPUTER SETTING..................................................................	19
OPERATING THE DISPLAY...............................................................	20
ADJUSTMENT MENU CONTENTS...............................................	22
POWER MANAGEMENT FEATURE.............................................	34
TROUBLE SHOOTING.......................................................................	35
RECYCLING INFORMATION.............................................................	36
APPENDIX .........................................................................................	37
SPECIFICATIONS : ProLite LE3240S-B1......................................	37
SPECIFICATIONS : ProLite LE3240S-B2......................................	38
SPECIFICATIONS : ProLite LE4340S...........................................	39
SPECIFICATIONS : ProLite LE4840S...........................................	40
SPECIFICATIONS : ProLite LE5540S...........................................	41
DIMENSIONS : ProLite LE3240S-B1............................................	42
DIMENSIONS : ProLite LE3240S-B2............................................	42
DIMENSIONS : ProLite LE4340S..................................................	43
DIMENSIONS : ProLite LE4840S..................................................	43
DIMENSIONS : ProLite LE5540S..................................................	44
COMPLIANT TIMING.....................................................................	45

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

STOP OPERATING THE DISPLAY WHEN YOU SENSE TROUBLE

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the display and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the display. Removing the cabinet may expose you to the danger of fire or electric shock.

DO NOT PUT ANY OBJECT INTO THE DISPLAY

Do not put any solid objects or liquids such as water into the display. In case of an accident, unplug your display immediately and contact your dealer or iiyama service center. Using the display with any object inside may cause fire, electric shock or damage.

INSTALL THE DISPLAY ON A FLAT, STABLE SURFACE

The display may cause an injury if it falls or is dropped.

DO NOT USE THE DISPLAY NEAR WATER

Do not use where water may be splashed or spilt onto the display as it may cause fire or electric shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the display only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.

PROTECT THE CABLES

Do not pull or bend the power cable and signal cable. Do not place the display or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the display during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

ENGLISH

FOR YOUR SAFETY 1

ENGLISH

CAUTION

INSTALLATION LOCATION

Do not install the display where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the display.

DO NOT PLACE THE DISPLAY IN A HAZARDOUS POSITION

The display may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the display, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the display from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the display at least 10 cm (or 4 inches) from any walls.

Operating the display on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE DISPLAY

When you move the display, turn off the power switch, unplug the display and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE DISPLAY

If the display is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE DISPLAY ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the display, otherwise, you may damage your computer.

REMARK FOR 24/7 USAGE

This product is not specifically designed for 24/7 usage. (Recommended operating time is 12 hours/ Day.)

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the display against a bright background or in a dark room.

For optimal viewing comfort, the display should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the display over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

2 FOR YOUR SAFETY

SPECIAL NOTES ON LCD DISPLAYS

 The following symptoms are normal with LCD displays and do not indicate a problem.

NOTE	- When you first turn on the LCD display, the picture may not fit in the display area
	because of the type of computer that is used. In this case, adjust the picture position to
	the correct position.
	- You may find slightly uneven brightness on the screen depending on the desktop
	pattern you use.
	- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
	after switching the image, when the same image is displayed for hours. In this case, the	ENGLISH
	screen is recovered slowly by changing the image or turning off the Power Switch for
	hours.
 This LCD cannot be used outdoors.
 This LCD cannot be used with the screen facing upwards.
 If you use a cable longer than the supplied one, the picture quality is not guaranteed.

FOR YOUR SAFETY 3

ENGLISH

USAGE CONFIRMATION

This product is designed for optimum usage at 12hours per day. The display is compatible for usage in Landscape applications.

IMAGE PERSISTENCE / IMAGE STICKING

Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This occurs when a residual image remains visible on a screen when static images are displayed for long periods of time. LCD Image Persistence is not permanent but constant images being displayed for a long period of time should be avoided.

To counteract Image Persistence, turn off the monitor for as long as the previous image was displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost” image, you should turn off the monitor for 1 hour in order to clear the residual image.

For all LFD products, iiyama recommends displaying moving images and utilising a moving screen saver at regular intervals whenever the screen is idle. You could also turn off the monitor when not in use to assist the prevention.

Other ways to reduce the risk of Image Persistence will be to utilise the FAN-on function (if available), Low Backlight and Low Brightness settings.

FOR EXTENDED USE AS A PUBLIC DISPLAY

 Image Sticking on LCD Panel

When a static image is displayed for hours, an electric charge trace remains near the electrode inside the LCD producing a “ghost” image. (Image Persistence).

Image Persistence is not a permanent feature.

 Recommendations

To prevent Image Sticking and promote longer life expectancy of display, we recommend the following:

1.Avoid static images displayed for long periods – change static images on continuous loop.

2.Turn off monitor when not in use, either by remote control or use Power Management or Schedule functions.

3.When monitor is installed in high ambient temperature environment(s) or in an enclosed position, utilise the Cooling Fan, Screen Saver and Low Brightness functions.

4.Suitable ventilation for any monitor is an expectation of any installation – climate control systems may need to be employed.

5.We strongly recommend utilisation of active cooling with fans for long operation times or high ambient temperature environments.

4 FOR YOUR SAFETY

CUSTOMER SERVICE

NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

CLEANING

WARNING  If you drop any materials or liquids such as water into the display when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

CAUTION  For safety reasons, turn off the power switch and unplug the display before you clean it.

NOTE  To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.

Thinner	Benzine	Abrasive cleaner
Spray-type cleaner	Wax	Acid or Alkaline solvent

Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.

CABINET	Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
	Then wipe the cabinet with a soft dry cloth.
LCD	Periodic cleaning with a soft dry cloth is recommended.
SCREEN	Don't use tissue paper etc. because these will damage the LCD screen.

ENGLISH

FOR YOUR SAFETY 5

BEFORE YOU OPERATE THE DISPLAY

FEATURES

		 Supports Resolutions up to 1920 × 1080
		 High Contrast 1400:1 (Typical) / Brightness 350cd/m2 (Typical) : ProLite LE3240S-B1
		 High Contrast 3000:1 (Typical) / Brightness 350cd/m2 (Typical) : ProLite LE4340S
		 High Contrast 4000:1 (Typical) / Brightness 350cd/m2 (Typical) : ProLite
	ENGLISH	LE4840S / ProLite LE3240S-B2
		 High Contrast 1200:1 (Typical) / Brightness 350cd/m2 (Typical) : ProLite LE5540S
		 Digital Character Smoothing
		 Automatic Set-up
		 Stereo Speakers
		2 × 10W Stereo Speakers
		 Plug & Play VESA DDC2B Compliant
		Windows® XP/Vista/7/8/8.1/10 Compliant
		 Power Management (VESA DPMS Compliant)
		 VESA Mounting Standard (100mm×100mm, 200mm×200mm) Compliant :
		ProLite LE3240S
		 VESA Mounting Standard (200mm×200mm, 400mm×400mm) Compliant :
		ProLite LE4340S / ProLite LE4840S
		 VESA Mounting Standard (400mm×200mm, 400mm×400mm) Compliant :
		ProLite LE5540S

CHECKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the display. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.

 Power Cable*		 VGA Cable	 DVI-D Cable
 RS-232C Cable		 Remote Control	 Battery (2pcs)
 POP Label		 iiyama Logo Sticker	 EU Energy Label
 Safety Guide		 Quick Start Guide
CAUTION	* The rating of	the Power Cable enclosed in 120V area is 10A/125V. If you are using

a power supply higher than this rating, then a power cable with a rating of 10A/

250V must be used. However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.

An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be used.

6 BEFORE YOU OPERATE THE DISPLAY

UNPACKING : ProLite LE5540S

Before unpacking your display, prepare a stable, level, and clean surface near a wall outlet.

Set the LCD display box in an upright position and open from the top of the box before removing the top cushions.

Remove the carton holders.

Remove the top cushion and take

the accessories box and the display out.

Pinch and Pull the Knob.

CAUTION

Moving the display requires at least two people. If not, it may drop and could result in a serious injury.

When moving/shipping the display, please hold by the carton holders.

ENGLISH

BEFORE YOU OPERATE THE DISPLAY 7

ENGLISH

CONTROLS AND CONNECTORS : DISPLAY

	<Back Controller>			Power Button
			MUTE	Mute Button
			INPUT	Enter / Input
				Select Button
	MUTE INPUT	MENU
			+	+ Button
			-	- Button
				Up Button
				Down Button
			MENU	Menu Button

<Front>

			Lighting : Normal Operation
		Green	Flash : Power Management (ECO Mode : Normal)
			* If there is no input signal from the computer and passes
			for 10 minutes.
	Power Indicator	Orange	If turn off the Power Button on the Remote Control and the
			Back Controller. Power Management (ECO Mode : Normal)
			If turn off the Power Button on the Remote Control and
		Red	the Back Controller. Power Management (ECO Mode :
			Low power standby)
		Off	Power Off
	Remote Sensor		Remote Sensor

<Remote sensor and power indicator - location>

1.Pull down the lens to improve remote control performance and ensure good visibility of the power status diode.

2.Push up the lens before mounting the display for video wall application.

3.Pull/Push the lens until hearing the click sound.

Push right to hide the lens

Push left to extend the lens

8 BEFORE YOU OPERATE THE DISPLAY

<Back>

L R L R OUT IN RJ45 OUT IN USB

Y Pb Pr

ENGLISH

		AC IN	AC-INLET	AC Connector( : Alternating current) (AC-IN)
		AC SWITCH	MAIN POWER	Main Power Switch
		(ON) / (OFF)
		PC AUDIO IN	Mini Jack	Audio Connector
		HDMI IN	HDMI	HDMI Connector
		DVI IN	DVI-D	DVI-D Connector
		VGA IN	VGA	VGA Connector
		COMPONENT
		VIDEO	RCA G/B/R	Component Video Connector
	(VIDEO IN)
		AUDIO IN	RCA L/R	Audio Connector
		AUDIO OUT	RCA L/R	Headphone Connector
		IR OUT	IR	IR Connector
		IR IN	IR	IR Connector
		LAN	RJ45	RJ45 Connector
		RS232C OUT	Mini Jack	RS232C Connector
		RS232C IN	Mini Jack	RS232C Connector
		USB	USB(5V, 500mA)	USB Connector
		Keyhole for		Keyhole for Security Lock
		Security Lock
		SPEAKERS		Speakers

BEFORE YOU OPERATE THE DISPLAY 9

ENGLISH

INSTALLATION

CAUTION

Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified service personnel.

Moving the display requires at least two people.

Before installing, please make sure the wall is strong enough to hold the necessary weight of the display and the mount.

[WALL MOUNTING]

Mounting Stage				Screw

L

Chassis

CAUTION

When using the wall mounting, consideration of thickness of the mounting stage needs to be taken. Tighten the M4/M6* Screws (4pcs) with washer which “L” length is 10mm to fasten the display.

Using a screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the display.

*M4 Screw : ProLite LE3240S

M6 Screw : ProLite LE4340S / ProLite LE4840S / ProLite LE5540S

[ROTATING THE DISPLAY]

It is designed to be compatible in landscape mode.

			Not Available
	Available

A

Landscape

Power indicator

A

A

A

10 BEFORE YOU OPERATE THE DISPLAY

CONTROLS AND CONNECTORS : REMOTE CONTROL

		Turns the display ON and OFF.
		Control playback of media files.
		: Play
	[PLAY]	: Stop
		: Pause
		: Quick-Return
		: Fast-Forward
		Selects the source.
		Press or button to select from
	INPUT	USB, Network, HDMI, DVI, YPbPr,
		AV or VGA. Press [OK] button to
		confirm and exit.
	TV
	LIST	Not available on this model.
	CH - / +
	HOME	Opens the display’s on-screen
		menu systems.
		Navigates through submenus and
		settings.
		: Up Button
		: Down Button
		: Left Button
		: Right Button
	OK	Confirms your selection or save changes.
		Selects the direct menu.
		PC mode : Sound style, Audio out,
	ADJUST	Picture format, Picture shift
		Video mode : Picture Style, Sound
		style, Audio out, Picture format,
		Picture shift
	BACK	Returns to a previous menu or
		closes the OSD Menu.
		VOLUME-: Decreases the sound
	VOLUME - / +	volume.
		VOLUME+: Increases the sound
		volume.
	MUTE	Turns on or off the mute function
		when the Menu is not displayed.
	COLOR	Select tasks or options.
	NUMERIC	Enter text for network setting.
	FORMAT	Change picture format.
	INFO	Provides source and resolution
		information.
	OPTIONS	Access currently available options,
		picture and sound menus.

ENGLISH

BEFORE YOU OPERATE THE DISPLAY 11