Iiyama E2472HDD, E2472HD User Manual

Page 1

USER MANUAL

Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.

ENGLISH

Page 2

ENGLISH

Page 3

TABLE OF CONTENTS

FOR YOUR SAFETY .............................................................................................. 1

SAFETY PRECAUTIONS ................................................................................ 1

SPECIAL NOTES ON LCD MONITORS .......................................................... 3

CUSTOMER SERVICE .................................................................................... 3

CLEANING ....................................................................................................... 3

BEFORE YOU OPERATE THE MONITOR ............................................................ 4

FEATURES ...................................................................................................... 4

CHECKING THE CONTENTS OF THE PACKAGE ......................................... 4

FITTING AND REMOVAL OF BASE ................................................................ 5

CONTROLS AND CONNECTORS .................................................................. 6

CONNECTING YOUR MONITOR .................................................................... 7

COMPUTER SETTING .................................................................................... 8

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE ............................... 8

OPERATING THE MONITOR ................................................................................. 9

ADJUSTMENT MENU CONTENTS ................................................................ 10

SCREEN ADJUSTMENTS ............................................................................... 15

POWER MANAGEMENT FEATURE ............................................................... 18

ENGLISH

TROUBLE SHOOTING .......................................................................................... 19

RECYCLING INFORMATION ................................................................................. 20

APPENDIX ............................................................................................................ 21

SPECIFICATIONS : ProLite E2472HD ........................................................... 21

SPECIFICATIONS : ProLite E2472HDD ......................................................... 22

DIMENSIONS .................................................................................................. 23

COMPLIANT TIMING ....................................................................................... 23

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in

residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there.

We reserve the right to change speciﬁ cations without notice.



All trademarks used in this user manual are the property of their respective owners.



As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy



efﬁ ciency.

Page 4

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause ﬁ re or electric shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of ﬁ re

ENGLISH

or electric shock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause ﬁ re, electric shock or damage.

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Do not use where water may be splashed or spilt onto the monitor as it may cause ﬁ re or electric shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the monitor only with the speciﬁ ed power supply. Use of an incorrect voltage will cause malfunction and may cause ﬁ re or electric shock.

CORRECT USE OF THE AC ADAPTER

Use only the AC Adapter provided by iiyama. Any deviation from this by using another type of adapter may result in damage to the accessory and the monitor by ﬁ re or electric shock.

DO NOT DISASSEMBLE THE AC ADAPTER

Disassembling the AC Adapter may expose you to the danger of ﬁ re or electric shock.

PROTECT THE CABLES

Do not pull or bend the AC adapter, the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause ﬁ re or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

1 FOR YOUR SAFETY

Page 5

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause ﬁ re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause ﬁ re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause ﬁ re or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

ENGLISH

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause ﬁ re or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause ﬁ re or electric shock.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the AC adapter, the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause ﬁ re or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

FOR YOUR SAFETY 2

Page 6

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

When you ﬁ rst turn on the LCD monitor, the picture may not ﬁ t in the display area

NOTE

ENGLISH



because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may ﬂ icker during initial use. Turn off



the Power Switch and then turn it on again to make sure the ﬂ icker disappears. You may ﬁ nd slightly uneven brightness on the screen depending on the desktop



pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may



remain after switching the image, when the same image is displayed for hours. In this case, the screen can be recovered slowly by changing the image or turning off the Power Switch for some hours. Contact your dealer or iiyama service center for the backlight replacement when the



screen is dark, ﬂ ickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE

NOTE

CLEANING

WARNING

CAUTION

NOTE

If you have to return your unit for service and the original packaging has been



discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

If you drop any materials or liquids such as water into the monitor when cleaning,



unplug the power cable immediately and contact your dealer or iiyama service center.

For safety reasons, turn off the power switch and unplug the monitor before you clean



it.

To protect the LCD panel, do not scratch or rub the screen with a hard object.



Never use any of the following strong solvents. These will damage the cabinet and the



LCD screen.

Thinner Benzine Abrasive cleaner

Touching the cabinet with any product made from rubber or plastic for a long time may



cause degeneration or loss of paint on the cabinet.

Spray-type cleaner Wax Acid or Alkaline solvent

CABINET

LCD

SCREEN

3 FOR YOUR SAFETY

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

Periodic cleaning with a soft dry cloth is recommended. Don't use tissue paper etc. because these will damage the LCD screen.

Page 7

BEFORE YOU OPERATE THE MONITOR

FEATURES

Supports Resolutions up to 1920 × 1080



High Contrast 1000:1 (Typical), ACR Function Available / Brightness 250cd/m



(Typical)

Quick Response Time 2ms (Gray to Gray)



Digital Character Smoothing



Automatic Set-up



Plug & Play VESA DDC2B Compliant



Windows

Power Management (ENERGY STAR



Keyhole for Security Lock



95/98/2000/Me/XP/Vista/7 Compliant

VESA DPMS Compliant)

ENGLISH

CHEKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama ofﬁ ce.

AC Adapter*



DVI-D Cable



Safety Guide



CAUTION

1. TO USERS IN 120V AREA The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/250V must be used. However, all guarantees and warranties are void for any problems or

damage caused by a power cable or AC adapter not supplied by iiyama.

2. Applicable AC Adapter

AC Adapter Type Name : DA-36L12 (Asian Power Device Inc.) / BB02-B (DARFON Electronics Corp.)

Power Cable*



Stand-Base (Screw for stand ﬁ xing attached)



Quick Start Guide



D-Sub Signal Cable

BEFORE YOU OPERATE THE MONITOR 4

Page 8

FITTING AND REMOVAL OF BASE

Put the monitor on a stable surface. The monitor may cause injury or damage if it

CAUTION

Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay

the monitor ﬂ at on a table with front face down.

Install the Stand-Base to the Monitor.

Fix the Monitor to the Stand by screwing the push-down knob in ﬁ rmly.

ENGLISH



falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.



Unplug the monitor before removal or installation to avoid electric shock or damage.



Stand-Base

e l e

a s e

o c k

The push-down knob.

Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay

the monitor ﬂ at on a table with front face down.

Pull the knob upwards, then unﬁ x the screw and remove the Stand-Base.

5 BEFORE YOU OPERATE THE MONITOR

Page 9

CONTROLS AND CONNECTORS

<Front>

<Back>

Power Indicator

NOTE

Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power

consumption to less than 1W when receiving no horizontal and/or vertical sync signal.

Power Switch ( ) Menu / Select Button (ENTER) Scroll Up Button ( )

Scroll Down / ECO Mode Button*1 (



)

/

Exit Button (EXIT) Auto Button (AUTO) Keyhole for Security Lock

NOTE

You can fasten a security lock and cable to prevent the monitor from being removed without your permission.

ENGLISH

Connector for AC Adapter (DC12V)

Audio out Connector ( ) D-SUB mini 15pin Connector (D-Sub)

Cable Holder

DVI-D 24pin Connector (DVI-D) HDMI Connector*

*1 You can skip the Menu items and display an adjustment scale directly. *2 Available for ProLite E2472HD only.

This Monitor does not have speakers. To hear sound, please connect an external speakers or headphones.

BEFORE YOU OPERATE THE MONITOR 6

Page 10

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off.

Connect the computer to the monitor with the signal cable. Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter ﬁ rst and then connect to the power supply. Turn on your monitor and computer.

NOTE  The signal cables used for connecting the computer and monitor may vary with the type of

computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama ofﬁ ce.

ENGLISH

For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama



ofﬁ ce for a suitable adaptor.

Make sure you tighten the ﬁ nger screws at each end of the signal cable.



[Example of Connection]

<Back>

Power Cable (Accessory)

AV Equipment

AC Adapter (Accessory)

HDMI Cable (Not Included)*

DVI-D Cable (Accessory)

D-Sub Signal Cable (Accessory)

Computer

Available for ProLite E2472HD only.

[ Collect Cables ]

Put the cables through the cable holder.

Collect cables at the back of the stand.

7 BEFORE YOU OPERATE THE MONITOR

Page 11

COMPUTER SETTING

Signal Timing



Change to the desired signal timing listed on page 23: COMPLIANT TIMING.

Windows 95/98/2000/Me/XP/Vista/7 Plug & Play



The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on

Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.

For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors

may be necessary for your computer and obtained via the Internet, using the address:

http://www.iiyama.com

For additional information on how to download the driver for your touch screen monitor,

NOTE



please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.



For further information, please contact your computer dealer ﬁ rst for advice.

ENGLISH

ADJUSTING THE VIEWING ANGLE

For optimal viewing it is recommended to look at the full face of



the monitor.

Hold the stand so that the monitor does not topple when you



change the monitor’s angle.

You are able to adjust the monitor’s angle up to 15° upward, 5°



downward.

In order to ensure a healthy and relaxed body position



when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor’s angle to your own preference.

NOTE

To do so may cause the monitor to fall over and

Do not touch the LCD screen when you change the



angle. It may cause damage or break the LCD screen.

Careful attention is required not to catch your ﬁ ngers



or hands when you change the angle.

Do not tilt the post beyond 20 degrees except when



repacking the monitor in its box.

break.

BEFORE YOU OPERATE THE MONITOR 8

Page 12

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory

with the COMPLIANT TIMING shown on page 23. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.

Press the ENTER Button to start the On Screen Display feature. There are

additional Menu items which can be switched by using the / Buttons.

Main Menu

ENGLISH

Auto Adjust

Luminance

Geometry

Color

OSD

Language

Recall

Miscellaneous

Input Select

Audio

Select the Menu item which contains the adjustment icon relating to the

adjustment you want to make. Press the ENTER Button. Then, use the / Buttons to highlight the desired adjustment icon.

Press the ENTER Button again. Use the / Buttons to make the appropriate

adjustment or setting.

Press the EXIT Button to leave the menu, and the settings you just made would

be automatically saved.

For example, to correct for vertical position, select Menu item of Geometry and then press the ENTER Button. Then, select (V.Position) by using the / Buttons.

Main Menu

Auto Adjust

Luminance

Geometry

Color

OSD

Language

Recall

Miscellaneous

Input Select

Audio

H. Position

V. Position

Pixel Clock

Phase

An adjustment page appears after you press the ENTER Button. Then, use the / Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this. Press the EXIT Button lastly, it ends, any changes are saved in the memory.

Geometry

V. Position

NOTE

Geometry

When button operations are aborted during adjustment, On-Screen Display disappears when the



time set for the OSD Time has passed. Also, press the EXIT button to quickly turn off the On-Screen Display.

Any changes are automatically saved in the memory when the On Screen Display



disappears.

Turning off the power should be avoided while using the Menu.

Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for



these adjustments, all other adjustments have only one setting which applies to all signal timings.

9 OPERATING THE MONITOR

Page 13

ADJUSTMENT MENU CONTENTS

Auto Adjust

Only Analog Input

Adjustment Item Problem / Option Button to Press

Auto Adjust *

Direct

Adjust H. / V. Position, Pixel Clock and Phase automatically.

* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for

SCREEN ADJUSTMENTS.

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

Auto Adjust: Press the Auto Button when the Menu is not displayed.



Luminance *

ENGLISH

Adjustment Item Problem / Option Button to Press

Brightness *

Contrast

Direct

Too dark Too bright

Too dull Too intense

Luminance adjustment disabled when ACR mode is active.

Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too

bright.

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

Brightness: Press the Button when the Menu is not displayed.



OPERATING THE MONITOR 10

Page 14

Geometry

Adjustment Item Problem / Option Button to Press

Only Analog Input

ENGLISH

H. Position

V. Position

Pixel Clock

Phase

Too left Too right

Too low Too high

Too narrow Too wide

To correct ﬂ ickering text or lines

Color

Adjustment Item Problem / Option Button to Press

9300K

7500K Yellowish white

6500K Reddish white

User Preset

Bluish white

Red Green

Blue

OSD

Adjustment Item Problem / Option Button to Press

H.Position

V.Position

OSD is too left OSD is too right

OSD is too low OSD is too high

Too weak Too strong

OSD Time

11 OPERATING THE MONITOR

You can set the OSD display duration time between 5 and 30 seconds.

Page 15

Language

Adjustment Item Problem / Option Button to Press

Language

Recall

Recall All

English Français French Deutsch Italiano Italian

Polski Polish

Adjustment Item Problem / Option Button to Press

Yes

Factory-preset data is restored.

Return to Menu.

English

German

Español Spanish Nederlands

Dutch Japanese Simpliﬁ ed Chinese Russian

ENGLISH

OPERATING THE MONITOR 12

Page 16

Miscellaneous

Adjustment Item Problem / Option Button to Press

1 2 3 4 5

ENGLISH

NOTE

Sharpness

You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.

DDC/CI is turned ON.

DDC/CI

Off

DDC/CI is turned OFF.

DDC/CI On and Off are switched as follows by pressing the Button successively. On Off

Displays information regarding the current input signal coming from the graphic card in your computer.

Miscellaneous

Display Information

NOTE

See your graphic card user guide for more information

Display Information

1920x1080 @ 60 Hz

about changing the resolution and refresh.

Increased Contrast Ratio

ACR

Off

Typical Contrast Ratio

Display Mode

Opening Logo

Full

Aspect

Off

Expansion display

Expansion display of Aspect

Increased Response time

Typical Response time

iiyama Logo displayed when the monitor is turned on.

iiyama Logo does not display when the monitor is turned on.

13 OPERATING THE MONITOR

Page 17

Input Select

Adjustment Item Problem / Option Button to Press

Input Select

NOTE

When only one of the three signal inputs is connected to the signal source, the one connected is automatically selected. Input Select function is not available if there is no signal input from the selected connector or during the power management mode.

Available for ProLite E2472HD only.

Audio*

Adjustment Item Problem / Option Button to Press

Volume

Mute

D-sub DVI

Too soft Too loud

Off

Select the Analog input. Select the Digital (DVI) input. Select the Digital (HDMI) input. HDMI*

ENGLISH

Turn off the sound temporarily.

Return the sound volume to the previous level.

Mute On and Off are switched as follows by pressing the Button successively.

NOTE



On Off

Suitable for HDMI input only on ProLite E2472HD.

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

ECO Mode : Press the



On : Brightness of back light is reduced.

Off : Normal

OptiColor : Press the EXIT Button when the Menu is not displayed.



Standard : For general windows environment and monitor default setting. Ofﬁ ce : For text editing and viewing in a word processing environment. Movie : For movie and video environment. Game : For PC game environment. Scenery : For displaying outdoor scenery images.

Button when the Menu is not displayed.

OPERATING THE MONITOR 14

Page 18

SCREEN ADJUSTMENTS

Adjust the image by following the procedure below to get the desired picture when selecting Analog input.

The screen adjustments described in this manual are designed to set image position and minimize



ﬂ icker or blur for the particular computer in use.

The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not



provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to ﬁ t the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.

Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to



the screen enlargement process.

It is preferable to adjust the image position and frequency with the monitor controls, rather than the



computer software or utilities.

ENGLISH

Perform adjustments after a warm-up period of at least thirty minutes.



Additional adjustments may be required after the Auto Adjust depending on the resolution or signal



timing.

The Auto Adjust may not work correctly when displaying the picture other than the screen adjustment



pattern. In this case, manual adjustments are required.

There are two ways to adjust the screen. One way is automatic adjustment for Position, Pixel Clock and Phase. The other way is performing each adjustment manually. Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama. com).

Adjust the image by following the procedure below to get the desired picture. This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.

Display the picture at the optimum resolution.

Enter the Test.bmp (screen adjustment pattern) to wallpaper.

NOTE

Consult the appropriate documentation for doing this.



Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the



wallpaper setting dialogue box. If you use Microsoft

PLUS! 95/98 cancel the setting of

“Stretch desktop wallpaper to ﬁ t the screen”.

[Adjustment pattern]

Zebra pattern

15 OPERATING THE MONITOR

Color bar

Picture frame

Page 19

Press the Auto Button. (Auto Adjust)

Adjust the image manually by following procedure below when the screen has a ﬂ icker or

blur, or the picture does not ﬁ t in the display area after performing the Auto Adjust.

Adjust the V.Position so that the top and bottom of the picture frame will ﬁ t to the display

area.

1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of

the display area.

ENGLISH

2) Stretch the right side of the picture frame to the right edge of the display area by

adjusting the Pixel Clock.

When the left side of the picture frame moves apart from the left edge of the display

NOTE



area during the Pixel Clock adjustment, adjust steps 1) and 2).

Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines in



the zebra pattern.

The picture may ﬂ icker during the Pixel Clock, H.Position and V.Position adjustment.



In case the picture frame is bigger or smaller than the data display area after the Pixel



Clock adjustment, repeat steps from

OPERATING THE MONITOR 16

Page 20

Adjust the Phase to correct horizontal wavy noise, ﬂ icker or blur in the zebra pattern.

NOTE

In case the strong ﬂ icker or blurs remain on a part of the screen, repeat steps



because the Pixel Clock may not be adjusted correctly. If the ﬂ icker or blurs still remain,

ENGLISH

set the refresh rate of computer to low (60Hz) and repeat steps from

Adjust the H.Position after the Phase adjustment if the horizontal position moves during



again.

the adjustment.

Adjust the Brightness and Color to get the desired picture after you complete the Pixel

Clock and Phase adjustments.

Put back your favorite wallpaper.

and

17 OPERATING THE MONITOR

Page 21

POWER MANAGEMENT FEATURE

The power management feature of this product complies with power saving requirement of ENERGY

STAR the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be conﬁ gured.



and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of

Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 1W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.

Power Indicator

ENGLISH

NOTE

NORMAL MODE

POWER MANAGEMENT MODE

Even when using the power management mode, the monitor consumes electricity. Turn



Blue

Orange

POWER CONSUMPTION

0 1W 100%

off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. It is possible that the video signal from the computer may be on while the H or V sync



signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly.

OPERATING THE MONITOR 18

Page 22

TROUBLE SHOOTING

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you

have. If the monitor does not get a picture, skip to 2.

2. Consult the following items if you cannot ﬁ nd an appropriate adjustment item in OPERATING THE

MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the

problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.

Problem Check

ENGLISH

The picture does not appear.

(Power indicator does not light up.)

(Power indicator is blue.)

(Power indicator is orange.)

The AC Adapter is ﬁ rmly seated in the connector.



The Power Cable is ﬁ rmly seated in the socket of the AC Adapter.



The Power Cable is ﬁ rmly seated in the socket.



The Power Switch is turned ON.



The AC socket is live. Please check with another piece of equipment.



If the blank screen saver is in active mode, touch the keyboard or the



mouse. Increase the Contrast and/or Brightness.



The computer is ON.

 

The Signal Cable is properly connected. The signal timing of the computer is within the speciﬁ cation of the monitor.



If the monitor is in power management mode, touch the keyboard or the



mouse. The computer is ON.



The Signal Cable is properly connected.

 

The signal timing of the computer is within the speciﬁ cation of the monitor.

The screen is not synchronized.

The screen position is not in the center.

The screen is too bright or too dark.

19 OPERATING THE MONITOR / TROUBLE SHOOTING

The Signal Cable is properly connected.



The signal timing of the computer is within the speciﬁ cation of the monitor.



The video output level of the computer is within the specification of the



monitor.

The signal timing of the computer is within the speciﬁ cation of the monitor.



The video output level of the computer is within the specification of the



monitor.

Page 23

Problem Check

The power voltage is within the speciﬁ cation of the monitor.

The screen is shaking.

No sound.



The signal timing of the computer is within the speciﬁ cation of the monitor.



The Volume is turned up.



The Mute is OFF.



ENGLISH

RECYCLING INFORMATION

For better environment protection please don't dispose your monitor.

Please visit our web site: www.iiyama.com/recycle for monitor recycling.

TROUBLE SHOOTING / RECYCLING INFORMATION 20

Page 24

APPENDIX

SPECIFICATIONS : ProLite E2472HD

Size Category 24" LCD Panel Driving system

a-Si TFT Active Matrix Diagonal: 24" (61cm)Size

Pixel pitch Brightness Contrast ratio

Viewable angle

ENGLISH

Response time

Display Colors Sync Frequency Maximum Resolution Input Connector

Plug & Play VESA DDC2B

0.277mm H × 0.277mm V 250cd/m

(Typical) 1000 : 1 (Typical), ACR Function Available Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) 5ms (Typical), 2ms (Gray to Gray) Approx.16.7M Horizontal: 31.0-83.0kHz, Vertical: 56-75Hz 1920 × 1080, 2.1 MegaPixels D-Sub mini 15 pin, DVI-D 24 pin, HDMI

Input Sync Signal Separate sync: TTL, Positive or Negative

Input Video Signal

Analog: 0.7Vp-p (Standard), 75 Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance Digital: HDMI (Ver.1.3)

Output Audio Connector ø 3.5mm mini jack (Stereo)

Positive

Ω,

Maximum Screen Size 531.36mm W × 298.89mm H / 20.9" W × 11.8" H Power Source DC12V, 3A AC Adapter (accessory) Input: 100-240VAC, 50/60Hz

24W typical, Power management mode: 1W maximumPower Consumption

Dimensions / Net Weight 570.0 × 420.0 × 179.0mm / 22.4 × 16.5 × 7.0" (W×H×D)

3.8kg / 8.37lbs (Excluding the AC Adapter)

Tilt Angle

Environmental Considerations

Approvals

Upward: 15 degrees Downward: 5 degrees Operating: Temperature

Humidity

Storage:

Temperature Humidity

5 to 35°C / 41 to 95°F

10 to 80% (No condensation)

-20 to 60°C / -4 to 140°F to 85% (No condensation)

CE, TÜV-Bauart, VCCI-B, Energy Star

21 APPENDIX

Page 25

SPECIFICATIONS : ProLite E2472HDD

Size Category 24" LCD Panel Driving system

a-Si TFT Active Matrix

Diagonal: 24" (61cm)Size Pixel pitch Brightness Contrast ratio Viewable angle Response time

Display Colors Sync Frequency Maximum Resolution Input Connector

Plug & Play VESA DDC2B

0.277mm H × 0.277mm V

250cd/m

Input Sync Signal Separate sync: TTL, Positive or Negative

Input Video Signal

Analog: 0.7Vp-p (Standard), 75

Positive

Ω,

Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance

Maximum Screen Size 531.36mm W × 298.89mm H / 20.9" W × 11.8" H Power Source DC12V, 3A

ENGLISH

AC Adapter (accessory) Input: 100-240VAC, 50/60Hz

24W typical, Power management mode: 1W maximumPower Consumption*

Dimensions / Net Weight 570.0 × 420.0 × 179.0mm / 22.4 × 16.5 × 7.0" (W×H×D)

3.8kg / 8.37lbs (Excluding the AC Adapter)

Tilt Angle

Environmental Considerations

Approvals

Upward: 15 degrees Downward: 5 degrees Operating: Temperature

Humidity

Storage:

Temperature Humidity

5 to 35°C / 41 to 95°F

10 to 80% (No condensation)

-20 to 60°C / -4 to 140°F to 85% (No condensation)

CE, TÜV-Bauart, VCCI-B, Energy Star

APPENDIX 22

Page 26

DIMENSIONS

570.0mm/22.4"

533.5mm/21.0"

ENGLISH

COMPLIANT TIMING

Video Mode

VGA

SVGA

XGA

VESA

SXGA

WXGA+

UXGA WSXGA+

Full HD

VGA TEXT

39.0mm/1.5"

301.0mm/11.9"

353.0mm/13.9"

420.0mm/16.5"

179.0mm/7.0"

PC Input

Horizontal

Frequency

31.469kHz

640×480

37.500kHz

37.879kHz

800×600

46.875kHz

48.363kHz

1024×768

60.023kHz

63.981kHz

1280×1024

1440×900

79.976kHz

55.935kHz

70.635kHz

1600×1200 1680×1050 1920×1080

640×350 720×400

75.000kHz

65.290kHz

66.590kHz

31.469kHz

Vertical

Frequency

59.940Hz

75.000Hz

60.317Hz

75.000Hz

60.004Hz

75.029Hz

60.020Hz

75.025Hz

59.887Hz

74.984Hz

60.000Hz

59.930Hz

70.087Hz

Dot Clock

25.175MHz

31.500MHz

40.000MHz

49.500MHz

65.000MHz

78.750MHz

108.000MHz

135.000MHz

106.500MHz

136.750MHz

162.000MHz

146.250MHz

138.500MHz

25.175MHz

28.322MHz

* *

NOTE

23 APPENDIX

* DVI input is not compliant.

M061A21