Iiyama B1702S, E1702S, E1702WS, E1702SV, E1702WSV User Manual
USER MANUAL
ENGLISH
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this
brief but comprehensive manual before
installing and switching on the monitor.
Please keep this manual in a safe place
for your future reference.
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
ENGLISH
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working environment for the
user and to reduce sight and strain problems. Important parameters are luminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the user and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
• Restrictions on
o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation
with scientists, experts, users as well as manufacturers all over the world. Since the end of the
1980s TCO has been involved in influencing the development of IT equipment in a more userfriendly direction. Our labelling system started with displays in 1992 and is now requested by users
and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
FCC DECLARATION OF CONFORMITY
Model Number: PL1702 / PL1702W
Trade Name: iiyama
Responsible party: Ampronix Inc.
Address: 8697 Research Dr. Irvine, CA.92618 U.S.A.
Telephone number: 949-788-9930
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If you determine the device does cause harmful interference to radio
or television reception (this may be determined by monitoring the interference while turning the device off and
on), you are encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio or TV technician for help.
ENGLISH
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION Changes or modifications not expressly approved by iiyama could void the users authority
to operate the device under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the public low voltage power supply system.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an E
energy efficiency.
NERGY STAR
®
Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for
TABLE OF CONTENTS
FOR YOUR SAFETY ......................................................................................................................... 1
SAFETY PRECAUTIONS ............................................................................................................ 1
SPECIAL NOTES ON LCD MONITORS ........................................................................................ 3
CUSTOMER SERVICE ................................................................................................................. 3
CLEANING .................................................................................................................................. 3
BEFORE YOU OPERATE THE MONITOR ........................................................................................... 4
FEATURES .................................................................................................................................. 4
CHECKING THE CONTENTS OF THE PACKAGE ........................................................................ 5
FITTING AND REMOVAL OF BASE : ProLite E1702S / E1702SV / E1702WS / E1702WSV ..... 6
CONTROLS AND CONNECTORS : ProLite E1702S / E1702SV / E1702WS / E1702WSV ........ 7
CONTROLS AND CONNECTORS : ProLite B1702S ................................................................... 8
ENGLISH
CONNECTING YOUR MONITOR : ProLite E1702S / E1702SV / E1702WS / E1702WSV .......... 9
CONNECTING YOUR MONITOR : ProLite B1702S ..................................................................... 10
COMPUTER SETTING .................................................................................................................. 11
ADJUSTING THE VIEWING ANGLE : ProLite E1702S / E1702SV / E1702WS / E1702WSV ..... 11
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1702S ................................... 12
PANEL ROTATION : ProLite B1702S .......................................................................................... 12
OPERATING THE MONITOR .............................................................................................................. 13
ADJUSTMENT MENU CONTENTS ............................................................................................... 14
SCREEN ADJUSTMENTS ............................................................................................................ 22
POWER MANAGEMENT FEATURE ............................................................................................. 25
TROUBLE SHOOTING ....................................................................................................................... 26
APPENDIX ......................................................................................................................................... 28
SPECIFICATIONS : ProLite E1702S ............................................................................................ 28
SPECIFICATIONS : ProLite E1702SV .......................................................................................... 29
SPECIFICATIONS : ProLite E1702WS ......................................................................................... 30
SPECIFICATIONS : ProLite E1702WSV ...................................................................................... 31
SPECIFICATIONS : ProLite B1702S ............................................................................................ 32
DIMENSIONS : ProLite E1702S / E1702SV ................................................................................ 33
DIMENSIONS : ProLite E1702WS / E1702WSV .......................................................................... 33
DIMENSIONS : ProLite B1702S ................................................................................................... 33
COMPLIANT TIMING .................................................................................................................... 34
CONNECTOR PIN ASSIGNMENT ................................................................................................. 35
Regulatory information : The high efficiency LCD backlights used in this
product contains 5mg or less of Mercury, the disposal of which may be
regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or
the Electronic Industries Alliance (www.eiae.org).
This information is only for U.S.A..
We recommend recycling of used product. Please contact your dealer or iiyama service
center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
ENGLISH
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
FOR YOUR SAFETY 1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
ENGLISH
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position.
Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours.
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
NOTE
The fluorescent light used in the LCD monitor may have to be periodically replaced.
For the warranty coverage on this component, please check with local iiyama
service center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
ENGLISH
CLEANING
WARNING
CAUTION
NOTE To protect the LCD panel, do not scratch or rub the screen with a hard object.
CABINET
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Thinner
Benzine
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
Spray-type cleaner
Wax
Acid or Alkaline solvent
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
[Stopper] : ProLite B1702S
Please stand the monitor and then remove the
stopper on the back of the stand slowly.
ENGLISH
FEATURES
43cm (17") TFT Color LCD Monitor
Supports Resolutions up to 1280 × 1024 : ProLite E1702S / E1702SV / B1702S
Supports Resolutions up to 1440 × 900 : ProLite E1702WS / E1702WSV
High Contrast 1000:1 / High Brightness 300cd/m
2
/ Quick Response Time 2ms
(Gray to Gray): ProLite E1702S-1 / E1702SV-1 / B1702S-1
High Contrast 1000:1 / High Brightness 300cd/m
2
:
ProLite E1702S-2 / E1702SV-2 / B1702S-2
High Contrast 600:1 / High Brightness 250cd/m
Multi-Color Control
2
: ProLite E1702WS / E1702WSV
Supports sRGB International Standard
Gamma Control
Clear Display for Moving Pictures & Photographs
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers
Economy Mode
Reduced Power Consumption
Plug & Play VESA DDC2B Compliant
®
Windows
DDC/CI Compliant
Power Management (E
Ergonomic Design
95/98/2000/Me/XP/Vista Compliant
NERGY STAR
®
and VESA DPMS Compliant)
TCO ’03 and TÜV-Ergonomics Approved
Digital Input (DVI-D, HDCP Compliant) for Clear Display :
ProLite E1702S / E1702WS
90° Panel Rotation Design : ProLite B1702S
VESA Mounting Standard (100mm×100mm) Compliant
4 BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
Power Cable *
DVI-D Signal Cable *
Stand *
3
User Manual
1
2
D-Sub Signal Cable
Audio Cable
Cable Holder
CAUTION
1
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
*
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.
However, all guarantees and warranties are void for any problems or damage
caused by a power cable not supplied by iiyama.
2
Accessory for ProLite E1702S / E1702WS / B1702S
*
3
Accessory for ProLite E1702S / E1702SV / E1702WS / E1702WSV
*
<softOSM>
The Desktop softOSM software complies with the DDC/CI standard and can be downloaded from the
iiyama website.
www.iiyama.com
softOSM Software Functions
Easy access to the range of user adjustments can be via the softOSM Software rather than the
buttons located on the display itself.
The communication between software and display occurs through the Display Cable provided;
hence no special cabling is required.
Screen rotation features can also be controlled via the softOSM Software switching on the fly
between Landscape and Portrait. Please note that a suitable graphics card with adequate
performance must be used in conjunction with this feature. : Available for ProLite B1702S only.
ENGLISH
Compatible with Windows 98, 2000, XP and Vista.
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE :
ProLite E1702S / E1702SV / E1702WS / E1702WSV
CAUTION
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
ENGLISH
Hold the monitor and push the post down
into the stand.
<Remove>
Press the stopper at the back of the stand
and remove the stand from the post.
Stand
Press the stopper
6 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS :
ProLite E1702S / E1702SV / E1702WS / E1702WSV
<Front> <Back>
Menu Button (MENU)
A
+ Button ( )
B
Power Switch ( )
C
– Button ( )
D
Auto Button (AUTO)
E
Power Indicator
F
Blue: Normal operation
Orange: Power Management
G
NOTE
Speakers
ENGLISH
Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
AC Connector (AC IN)
H
Audio Connector ( )
I
DVI-D 24pin Connector (DVI-D)*
J
K D-sub mini 15pin Connector (D-SUB)
L Keyhole for Security Lock
NOTE
Available for ProLite E1702S / E1702WS only.
*
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
BEFORE YOU OPERATE THE MONITOR 7
CONTROLS AND CONNECTORS : ProLite B1702S
ENGLISH
Menu Button (MENU)
A
+ Button ( )
B
Power Switch ( )
C
– Button ( )
D
<Front> <Back>
Auto Button (AUTO)
E
Power Indicator
F
NOTE
Speakers
G
AC Connector (AC IN)
H
Audio Connector ( )
I
DVI-D 24pin Connector (DVI-D)
J
K D-sub mini 15pin Connector (D-SUB)
Blue: Normal operation
Orange: Power Management
Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
L Keyhole for Security Lock
NOTE
8 BEFORE YOU OPERATE THE MONITOR
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Loading...