USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
Congratulations!
This product is TCO Certified
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
protection against sound spikes (headsets) and fan noise (projectors, computers)
For more information, please visit
for Sustainable IT
www.tcodevelopment.com
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC
Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
ENGLISH
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR
for energy effi ciency.
®
Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
FITTING AND REMOVAL OF BASE : ProLite B2083HSD ..............6
FITTING AND REMOVAL OF BASE :
ProLite E2083HSD / ProLite E2083HD ...........................................7
CONTROLS AND CONNECTORS : ProLite B2083HSD ................8
CONTROLS AND CONNECTORS :
ProLite E2083HSD / ProLite E2083HD ...........................................9
CONNECTING YOUR MONITOR : ProLite B2083HSD ................10
CONNECTING YOUR MONITOR :
ProLite E2083HSD / ProLite E2083HD .........................................11
COMPUTER SETTING .................................................................12
ADJUSTING THE VIEWING ANGLE :
ProLite E2083HSD / ProLite E2083HD .........................................12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite B2083HSD ........................................................................13
PANEL ROTATION : ProLite B2083HSD .......................................13
OPERATING THE MONITOR .............................................................14
ADJUSTMENT MENU CONTENTS ..............................................15
SCREEN ADJUSTMENTS ............................................................20
POWER MANAGEMENT FEATURE .............................................23
TROUBLE SHOOTING ......................................................................24
RECYCLING INFORMATION .............................................................25
APPENDIX ........................................................................................26
SPECIFICATIONS : ProLite B2083HSD .......................................26
SPECIFICATIONS : ProLite E2083HSD .......................................27
SPECIFICATIONS : ProLite E2083HD ..........................................28
DIMENSIONS : ProLite B2083HSD ..............................................29
DIMENSIONS : ProLite E2083HSD / ProLite E2083HD ...............29
COMPLIANT TIMING ....................................................................30
ENGLISH
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
ENGLISH
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
FOR YOUR SAFETY 1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
ENGLISH
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
DO NOT USE THE MONITOR FOR 24-HOURS CONTINUOUSLY
The monitor is not designed to work for 24-hours continuously, do not use the monitor for 24-hours
continuously.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
Due to the nature of the backlight, the screen may fl icker during initial use. Turn off the
Power Switch and then turn it on again to make sure the fl icker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, fl ickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
If you have to return your unit for service and the original packaging has been
NOTE
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CLEANING
If you drop any materials or liquids such as water into the monitor when cleaning,
WARNING
CAUTION
NOTE
unplug the power cable immediately and contact your dealer or iiyama service center.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
ENGLISH
CABINET
LCD
SCREEN
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1600 × 900
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
250cd/m
Quick Response Time 5ms (Typical)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers : ProLite B2083HSD / ProLite E2083HSD
ENGLISH
2 × 2W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows
Power Management (ENERGY STAR
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
Power Cable*
Audio Cable*
Screw for stand fi xing (3pcs)*
Quick Start Guide
CAUTION
2
(Typical)
®
XP/Vista/7/8 Compliant
®
VESA DPMS Compliant)
1
2
1
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
*
VGA(D-sub) Signal Cable DVI-D Cable*
Stand-Base
4
Stand*3
Safety Guide
2
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
2
*
Accessory for ProLite B2083HSD / ProLite E2083HSD.
3
Accessory for ProLite E2083HSD / ProLite E2083HD.
*
4
Accessory for ProLite B2083HSD.
*
4 BEFORE YOU OPERATE THE MONITOR
WALL MOUNTING
WARNING
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
L
Mounting Stage
Screw
ENGLISH
Chassis
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE : ProLite B2083HSD
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
A
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
B
ENGLISH
Use ‘thumb screw’ provided to secure base to monitor column.
C
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
A
Lay the monitor fl at on a table with front face down.
Remove ‘thumb screw’ to remove base from monitor column.
B
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
Stand-Base
Thumb screw for Stand-Base fi xing
<Stopper>
Put the monitor on a fl at surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly.
6 BEFORE YOU OPERATE THE MONITOR
Stopper
FITTING AND REMOVAL OF BASE : ProLite E2083HSD / ProLite E2083HD
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to
A
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Hold the monitor and push the Stand until it clicks and
B
is secure.
Hold the monitor and push the Stand-Base until it clicks
C
and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to
A
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-
B
Base.
Press the stopper at the top of the stand and pull it to
C
remove the stand from the monitor.
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
Stand
Stand-Base
ENGLISH
Stopper
Hook
BEFORE YOU OPERATE THE MONITOR 7
CONTROLS AND CONNECTORS : ProLite B2083HSD
ENGLISH
Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
Power Switch ( )
Menu / Select Button (MENU)
Scroll Up / Volume Button (
Scroll Down / ECO Mode Button (
Exit Button (EXIT)
Auto Button (AUTO)
Speakers
VGA(D-sub) mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
NOTE
without your permission.
Cable Holes
Headphone Connector (
Audio Connector (LINE IN)
AC Connector ( )
<Front> <Back>
/ )
)
/
)
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite E2083HSD / ProLite E2083HD
<Front>
Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
Power Switch ( )
Menu / Select Button (MENU)
Scroll Up / Volume * Button (
Scroll Down / ECO Mode Button (
Exit Button (EXIT)
Auto Button (AUTO)
Speakers *
VGA(D-sub) mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
NOTE
without your permission.
Headphone Connector * (
Audio Connector * (LINE IN)
AC Connector ( )
* Available for ProLite E2083HSD only.
)
/ )
)
/
<Back>
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONNECTING YOUR MONITOR : ProLite B2083HSD
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer
VGA(D-sub) Signal Cable
(Accessory)
DVI-D Cable (Accessory)
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
ENGLISH
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
[Example of Connection]
<Back>
[ Collect Cables ]
Put the cables through the cable hole.
A
Collect cables at the back of the stand.
B
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite E2083HSD / ProLite E2083HD
Power Cable
(Accessory)
Audio Cable (Accessory)*
Computer
VGA(D-Sub) Signal Cable
(Accessory)
DVI-D Cable (Accessory)*
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.*
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
[Example of Connection]
Available for ProLite E2083HSD only.
*
ENGLISH
<Back>
BEFORE YOU OPERATE THE MONITOR 11
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 30: COMPLIANT TIMING.
ADJUSTING THE VIEWING ANGLE : ProLite E2083HSD / ProLite E2083HD
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 22° upward,
ENGLISH
5° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
5° 22°
NOTE
Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fi ngers or hands when you change the angle.
12 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2083HSD
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
130mm
NOTE
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
Monitor
Stand
PANEL ROTATION : ProLite B2083HSD
Adjust the mother’s height.
A
Rotate the panel 90 degrees.
B
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully extending
NOTE
Adjust the monitor’s angle to your preference.
C
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
45°
ENGLISH
45°
90°
BEFORE YOU OPERATE THE MONITOR 13
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 30. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS.
Press the ENTER Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Main Menu
Auto Adjust
Luminance
Geometry
Color
ENGLISH
OSD
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the / Buttons to
highlight the desired adjustment icon.
Press the ENTER Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would
be automatically saved.
For example, to correct for vertical position, select Menu item of Geometry and then press the
ENTER Button. Then, select (V.Position) by using the / Buttons. An adjustment page
appears after you press the ENTER Button.
Main Menu
Auto Adjust
Luminance
Geometry
Color
OSD
Language
Recall
Miscellaneous
Input Select
Audio
Language
Recall
Miscellaneous
Input Select
Audio
H. Position
V. Position
Pixel Clock
Phase
Geometry
50
50
50
50
Then, use the / Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Geometry
V. Position
50
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when
the time set for the OSD Time has passed. Also, press the EXIT button to quickly turn off the OnScreen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
14 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Direct
Direct
Direct
Direct
Auto Adjust
Only Analog Input
Adjustment Item Problem / Option Button to Press
Auto Adjust *
Adjust H. / V. Position, Pixel Clock and Phase
automatically.
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 20 for
SCREEN ADJUSTMENTS.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Auto Adjust : Press the Auto Button when the Menu is not displayed.
Luminance *
1
Adjustment Item Problem / Option Button to Press
Brightness *
2
Contrast
1
*
Luminance adjustment disabled when ACR mode is active.
2
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
Too dark
Too bright
Too dull
Too intense
bright.
ENGLISH
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Brightness : Press the Button when the Menu is not displayed.
OPERATING THE MONITOR 15
Geometry
Only Analog Input
Adjustment Item Problem / Option Button to Press
ENGLISH
9300K
7500K
6500K
User Preset
H. Position
V. Position
Pixel Clock
Phase
Too left
Too right
Too low
Too high
Too narrow
Too wide
To correct fl ickering text or lines
Color
Adjustment Item Problem / Option Button to Press
Bluish white
Yellowish white
Reddish white
Red
Green
Blue
Too weak
Too strong
OSD
Adjustment Item Problem / Option Button to Press
H.Position
V.Position
OSD Time
16 OPERATING THE MONITOR
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 30 seconds.
Language
Adjustment Item Problem / Option Button to Press
Español Spanish
Nederlands
Dutch
Japanese
Simplifi ed Chinese
Russian
Language
English
Français French
Deutsch
Italiano Italian
Polski Polish
English
German
Recall
Adjustment Item Problem / Option Button to Press
Factory-preset data is restored.
Recall All
Yes
No
Return to Menu.
ENGLISH
OPERATING THE MONITOR 17
Miscellaneous
Adjustment Item Problem / Option Button to Press
1 2 3 4 5
ENGLISH
NOTE
Sharpness
You can change the picture quality from 1 to 5 (sharp to soft).
Press the Button to change the picture quality in numerical
order. Press the Button to change the picture quality in
reverse numerical order.
DDC/CI
On
Off
DDC/CI is turned ON.
DDC/CI is turned OFF.
DDC/CI On and Off are switched as follows by pressing the Button successively.
On Off
Displays information regarding the current input signal coming
from the graphic card in your computer.
Miscellaneous
Display Information
See your graphic card user guide for more information
NOTE
Display Information
1600x900 @ 60 Hz
about changing the resolution and refresh.
Adv. Contrast
Display Mode
Opening Logo
On
Off
Full
Aspect
On
Off
Increased Contrast Ratio
Typical Contrast Ratio
Expansion display
Expansion display of Aspect
iiyama Logo displayed when the monitor is turned on.
iiyama Logo does not display when the monitor is
turned on.
18 OPERATING THE MONITOR
Input Select
Direct
Direct
Direct
Adjustment Item Problem / Option Button to Press
Input Select
When only one of the three signal inputs is connected to the signal source, the one
NOTE
connected is automatically selected. Input Select function is not available if there is no
signal input from the selected connector or during the power management mode.
D-sub
DVI
Select the Analog input.
Select the Digital (DVI) input.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Input Select : Pressing and holding of the AUTO Button for 2-3 seconds when the Menu is not
displayed.
Audio*
Adjustment Item Problem / Option Button to Press
Volume
Mute
Mute On and Off are switched as follows by pressing the Button successively.
NOTE
On Off
* Available for ProLite B2083HSD / ProLite E2083HSD only.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
ECO Mode : Press the
On : Brightness of back light is reduced.
Off : Normal
NOTE
The Power indicator is off when ECO Mode is on.
i-Style Color : Press the EXIT Button when the Menu is not displayed.
Off : Return to a state set by color adjustment.
Standard : For general windows environment and monitor default setting.
Game : For PC game environment.
Cinema : For movie and video environment.
Scenery : For displaying outdoor scenery images.
Text : For text editing and viewing in a word processing environment.
Too soft
Too loud
On
Off
Button when the Menu is not displayed.
Turn off the sound temporarily.
Return the sound volume to the previous level.
ENGLISH
OPERATING THE MONITOR 19
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1600 × 900, but can not
provide the best at resolutions of less than 1600 × 900 because the picture is automatically stretched
to fi t the full screen. It is recommended to operate at resolution of 1600 × 900 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
ENGLISH
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or
signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Pixel Clock
and Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust fi rst when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box.
[Adjustment pattern]
®
OS.
Zebra pattern
20 OPERATING THE MONITOR
Color bar
Picture frame
Press the AUTO Button. (Auto Adjust)
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fi t to the display
area.
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Pixel Clock.
ENGLISH
NOTE
When the left side of the picture frame moves apart from the left edge of the display
area during the Pixel Clock adjustment, adjust steps 1) and 2).
Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines
in the zebra pattern.
The picture may fl icker during the Pixel Clock, H.Position and V.Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the
Pixel Clock adjustment, repeat steps from
.
OPERATING THE MONITOR 21
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern.
NOTE
In case the strong fl icker or blurs remain on a part of the screen, repeat steps
because the Pixel Clock may not be adjusted correctly.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
ENGLISH
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Pixel
Clock and Phase adjustments.
Put back your favorite wallpaper.
and
22 OPERATING THE MONITOR
POWER MANAGEMENT FEATURE
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
The power management feature of this product complies with power saving requirement of ENERGY
®
STAR
and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
ENGLISH
NOTE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
OPERATING THE MONITOR 23
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
The picture does
ENGLISH
not appear.
The Power Cable is fi rmly seated in the socket.
(Power indicator
does not light up.)
(Power indicator
is blue.)
(Power indicator
is orange.)
The screen is not
synchronized.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
24 TROUBLE SHOOTING
Problem Check
The power voltage is within the specifi cation of the monitor.
The screen is
shaking.
No sound.
The sound is too
loud or too quiet.
A strange noise is
heard.
The signal timing of the computer is within the specifi cation of the monitor.
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The Audio Cable is properly connected.
ENGLISH
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
TROUBLE SHOOTING / RECYCLING INFORMATION 25
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS : ProLite B2083HSD
Size Category 20"
LCD
Panel
ENGLISH
Display Colours
Sync Frequency
Maximum Resolution
Input Connector
Plug & Play VESA DDC2B
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Speakers 2W × 2 (Stereo speakers)
Maximum Screen Size
Power Source
Dimensions / Net Weight
Tilt Angle
Environmental
Considerations
Approvals
NOTE
Panel Technology
TN
Diagonal: 19.5" (49.4cm)Size
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
0.271mm H × 0.271mm V
2
250cd/m
(Typical)
1000 : 1 (Typical), Adv. Contrast Function Available
Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical)
5ms (Typical)
Approx. 16.7M
Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
1600 × 900, 1.4 MegaPixels
D-Sub mini 15 pin, DVI-D 24 pin
TM
Analog: 0.7Vp-p (Standard), 75
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
433.9mm W × 236.3mm H / 17.1" W × 9.3" H
100-240VAC, 50/60Hz, 1.0A
1
15W typical, Power management mode: 0.5W maximumPower Consumption*
469.5 × 356.5 - 486.5 × 230.0mm / 18.5 × 14.0 - 19.2 × 9.1" (W×H*2×D)
4.3kg / 9.48lbs
Upward: 22 degrees Downward: 5 degrees, Left/Right: 45 degrees each
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
TCO Certifi ed, CE, TÜV-GS, VCCI-B, GOST-R
1
Audio/USB equipment is not connected.
*
2
The height of the top of the monitor except the stand height.
*
Positive
, ENERGY STAR
®
26 APPENDIX
SPECIFICATIONS : ProLite E2083HSD
Size Category 20"
LCD
Panel
Display Colours
Sync Frequency
Maximum Resolution
Input Connector
Plug & Play VESA DDC2B
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Speakers 2W × 2 (Stereo speakers)
Maximum Screen Size
Power Source
Dimensions / Net Weight
Tilt Angle
Environmental
Considerations
Approvals
Panel Technology
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
TN
Diagonal: 19.5" (49.4cm)Size
0.271mm H × 0.271mm V
2
250cd/m
(Typical)
1000 : 1 (Typical), Adv. Contrast Function Available
Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical)
5ms (Typical)
Approx. 16.7M
Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
1600 × 900, 1.4 MegaPixels
D-Sub mini 15 pin, DVI-D 24 pin
TM
Analog: 0.7Vp-p (Standard), 75
Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
433.9mm W × 236.3mm H / 17.1" W × 9.3" H
100-240VAC, 50/60Hz, 1.0A
15W typical, Power management mode: 0.5W maximumPower Consumption*
469.5 × 360.0 × 203.0mm / 18.5 × 14.2 × 8.0" (W×H×D)
2.7kg / 5.95lbs
Upward: 22 degrees Downward: 5 degrees
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
TCO Certifi ed, CE, TÜV-GS, VCCI-B, GOST-R
, ENERGY STAR
ENGLISH
®
* Audio equipment is not connected.
NOTE
APPENDIX 27
SPECIFICATIONS : ProLite E2083HD
Size Category 20"
LCD
Panel
Display Colours
ENGLISH
Sync Frequency
Maximum Resolution
Input Connector
Plug & Play VESA DDC2B
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Maximum Screen Size
Power Source
Dimensions / Net Weight 469.5 × 360.0 × 203.0mm / 18.5 × 14.2 × 8.0" (W×H×D)
Tilt Angle
Environmental
Considerations
Approvals
Panel Technology
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
TN
Diagonal: 19.5" (49.4cm)Size
0.271mm H × 0.271mm V
2
250cd/m
(Typical)
1000 : 1 (Typical), Adv. Contrast Function Available
Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical)
5ms (Typical)
Approx. 16.7M
Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
1600 × 900, 1.4 MegaPixels
D-Sub mini 15 pin, DVI-D 24 pin
TM
Analog: 0.7Vp-p (Standard), 75
Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
433.9mm W × 236.3mm H / 17.1" W × 9.3" H
100-240VAC, 50/60Hz, 1.0A
15W typical, Power management mode: 0.5W maximumPower Consumption
2.6kg / 5.73lbs
Upward: 22 degrees Downward: 5 degrees
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
TCO Certifi ed, CE, TÜV-GS, VCCI-B, GOST-R
, ENERGY STAR
®
28 APPENDIX
DIMENSIONS : ProLite B2083HSD
469.5mm/18.5”
435.5mm/17.1”
238.0mm/9.4”
277.5mm/10.9”
59.5mm/2.3”
393.5mm/15.5”
356.5mm/14.0”(486.5mm/19.2”)
( ) : Maximum adjustment range
DIMENSIONS : ProLite E2083HSD / ProLite E2083HD
469.5mm/18.5”
435.5mm/17.1”
238.0mm/9.4”
238.0mm/9.4”
59.5mm/2.3”
277.5mm/10.9”
360.0mm/14.2”
230.0mm/9.1”
250.0mm/9.8”
ENGLISH
203.0mm/9.1”
APPENDIX 29
COMPLIANT TIMING
VESA
ENGLISH
VGA TEXT
NOTE
Video Mode
VGA
SVGA
XGA 1024 × 768
SXGA
HD+ 1600 × 900
* DVI input is not compliant.
640 × 480
800 × 600
1280 × 1024
640 × 350
720 × 400
Horizontal
Frequency
31.469kHz
37.500kHz
37.879kHz
46.875kHz
48.363kHz
60.023kHz
63.981kHz
79.976kHz
55.540kHz
31.469kHz
31.469kHz
Vertical
Frequency
59.940Hz
75.000Hz
60.317Hz
75.000Hz
60.004Hz
75.029Hz
60.020Hz
75.025Hz
60.000Hz
70.087Hz
70.087Hz
Dot Clock
25.175MHz
31.500MHz
40.000MHz
49.500MHz
65.000MHz
78.750MHz
108.000MHz
135.000MHz
97.750MHz
25.175MHz
28.322MHz
*
*
30 APPENDIX
M115A21
Loading...