I-Inc iB-171 User Manual

17 inch Wide Screen
TFT LCD Monitor
iB171
User’s Manual
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. The device complies with Parts 15 of the FCC Rule. Operation is subject to the following
two conditions(1) this device may not cause harmful interferenceand (2) this device must accept any interference received, including interference that may cause undesired operations.
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.
This device complies with requirement of EMC directive 89/336/EEC with regard to Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive.
Socket-outlet shall be near the equipment and shall be accessible.
2
User’s Manual
TABLE OF CONTENTS
SAFETY NOTICE........................................................................................... 4
PRECAUTIONS......................................................................................... 4
SPECIAL NOTES ON LCD MONITORS................................................... 5
BEFORE YOU OPERATE THE MONITOR....................................................6
FEATURES................................................................................................ 6
CHECKING THE CONTENTS OF THE PACKAGE.................................. 6
INSTALLATION INSTRUCTIONS.............................................................7
POWER...................................................................................................... 7
MAKING CONNECTIONS......................................................................... 8
ADJUSTING THE VIEWING ANGLE........................................................ 9
OPERATING INSTRUCTIONS..................................................................... 10
GENERAL INSTRUCTIONS.................................................................... 10
FRONT PANEL CONTROL..................................................................... 11
HOW TO ADJUST A SETTING ............................................................... 12
PLUG AND PLA Y.................................................................................... 15
TECHNICAL SUPPORT (FAQ)....................................................................16
Q & A FOR GENERAL PROBLEMS.......................................................16
ERROR MESSAGE & POSSIBLE SOLUTIONS .................................... 17
APPENDIX ................................................................................................... 18
SPECIFICATIONS................................................................................... 18
3
User’s Manual
SAFETY NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.
PRECAUTIONS
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry
tub, swimming pool or in a wet basement.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can
injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To
ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
Unplu g the unit during a lighting storm or when it will not be used for long period of time.
This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
Never push any object into the slot on the monitor cabinet. It could short circuit parts
causing a fire or electric shock. Never spill liquids on the monitor.
Do not attempt to service the monitor by yourself; opening or removing covers can expose you to
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
The wall socket shall be installed near the equipment and shall be easily accessible.
4
User’s Manual
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
off the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of
0.01% or less such as a missing pixel or a pixel lit all of the time.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
If the screen suddenly flashes erratically or the backlighting fails, please contact your
dealer or service center for repair. Do not attempt to repair the monitor yourself.
Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELE CTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
.
5
User’s Manual
BEFORE YOU OPERATE THE MONITOR
FEATURES
17” Wide screen TFT Color LCD Monitor
Crisp, Clear Display for Windows
Recommended Resolutions: 1440 X 900 @60Hz
EPA ENERGY STAR
Ergonomic Design
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:
®
LCD Monitor
Screen Base
Cables and User manual
Power Cord VGA Cable
DVI-D Cable (dual input
mode optional)
User’s manual Warranty card
6
Loading...
+ 12 hidden pages