iHome IH-U502FP, IH-U500FB, IH-U501FW, IH-U504FN User Manual
FCC Statement
This device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction guide, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and the •
receiver.
Connect the equipment into an outlet on a circuit different •
from that to which the receiver is connected.
Consult a service representative for help.•
Properly shielded and grounded cables and connectors must
be used in order to comply with FCC emission limits. LifeWorks
is not responsible for any radio or television interference
caused by using other than recommended cables and
connectors or by unauthorized changes or modications to this
equipment. Unauthorized changes or modications could void
the user’s authority to operate the equipment.
Responsible party:
LifeWorks Technology Group LLC
1412 Broadway, New York, NY 10018
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Warning Improper setup, use and care of this product can
increase the risk of serious injury, death or device damage.
Read and keep this guide and all other printed guides for future
reference. For updated guides or replacements, go to
www.life-works.com
Do Not Attempt Repairs Do not attempt to take apart,
open, repair, service or modify the device(s). Doing so may
risk electric shock or other hazard. Evidence of any attempt to
open or modify the device, including any peeling, puncture or
removal of labels, will void the Limited Lifetime Warranty.
Printed in China
© 2008 LifeWorks Technology Group LLC.
iHome™ is a trademark of SDI Technologies Inc. used under license.
Windows Vista
Mac
All other brands and logos are trademarks of their respective companies.
®
is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
®
is a trademark of Apple Inc., registered in the U.S. and other countries.
technical support
for technical support please visit
www.life-works.com
or call (877) LIFE-540 (877-543-3540)
document version number 0811-0
lifetime warranty
for warranty information, please visit
www.life-works.com/warranty
for model number(s)
IH-U500FB IH-U501FW
IH-U502FP IH-U504FN
IH-U500FB IH-U501FW
IH-U502FP IH-U504FN
quick start guide
Congratulations on the purchase of your new
4-port USB 2.0 hub.
This product comes with a limited lifetime warranty.
Before using your product, please thoroughly read and follow the
instructions inside this guide.
If you still need help, see the back page for other support options.
If you want to know more about our products, visit us online at
www.life-works.com.
system requirements
®
Windows•
Windows Vista
or
Mac
USB port•
2000, XP or
®
OS X v10.4 or later
USB 2.0 hub
®
4-port
setup
connect main USB connector to a USB port on
your computer
if required, also connect secondary
USB connector (see note under step 4)
quick sta r t gu ide
USB-to-hub
connector
main USB-tocomputer
connector
secondary
USB-to-computer
connector
1•
2•
verify package contents
4-port USB 2.0 hub
connect USB cable to hub
3 ft. Y-split USB cable
quick start guide
(in your hands right now)
4•
5•
connect devices to hub
Your 4-port USB 2.0 hub can be used with a single USB-to-computer notef
connection to power any USB device that consumes less than 100 mA
(milliamperes)—including digital cameras, card readers, keyboards, mice,
MP3 players, thumb drives and many other handheld USB devices.
If you have multiple USB devices connected to your hub at the same time,
your hub may need additional power. To provide more power to the hub,
also connect the secondary USB connector directly to your computer.
USB devices that consume more than 100 mA—such as external drives,
notef
printers, scanners or fax machines—may not operate properly when
connected through the hub.
start using your devices!
troubleshooting
situation try this
USB hub does
not work
a device
connected to
the hub does
not work
Ensure the USB cable is properly inserted into the hub and a USB •
port on your computer.
Ensure the devices are connected properly.•
Connect the hub to a different USB port.•
Connect both USB connectors to your computer.•
Try connecting the hub to a USB 2.0 port on your computer if •
available (not a slower USB 1.1 port)
3•
connect USB cables to computer
Loading...