Ihome IHM45 User Manual

Model iHM45
Portable Charging
Alarm Clock Speaker
Questions? For latest instructions, visit www.ihomeaudio.com/support
Table of Contents
Package contains Controls and Indicators Quick Start iHM45 Display Install Clock Backup Battery Using iHM45 Charging your Audio Device Listening to your Audio Device Clock Setting Alarm Operation Snooze/Dimmer Operation A Consumer Guide to Product Safety Trouble Shooting Warranty Information
2 3 4 4 5 5 6 6 7 8 9
10
11
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
NOTE: Be careful not to touch the surface of the speakers at either end of the unit.
Getting Started
Thank you for purchasing the iHome iHM45 Audio Speaker System for your audio device. Designed to work with most audio devices, this system provides high quality audio performance that brings out the best in your music. Please read this instruction book carefully before operating the iHM45 and keep it for future reference.
1
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Battery Warning
For models that use Lithium batteries
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water,
fire, or high temperatures & not handled appropriately.
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not
mix with used or other battery types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75˚C (167˚F)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards
1
iHM45 system
2
micro USB charging cable
3.5mm audio input cable
3
universal voltage adaptor
4
(100-240 volts, 50/60 Hz)
package contains
1
Button
+
Raise volume, Adjust clock/alarm time forward
_
Button
Lower volume, Adjust clock/alarm time backward
Power Button
Press to power unit ON or OFF
Alarm Button
Press and hold for Alarm Setting mode
Controls and Indicators
Top Panel
Clock Adj. Button
Press and hold for Clock Adjust mode
Back Panel
Snooze/Dimmer Button
Silence alarm temporarily or adjust display brightness
DC Jack
Connect AC adaptor
Aux in
Connect audio device
DST On/Off button
Press to add or subtract 1 hour for daylight saving time or Standard time
2
USB Mode Switch
Switch to match device’s charging requirements
USB Charging Port
Charges attached device via USB when connected to AC power
Loading...
+ 10 hidden pages