2. What are the system requirements?
• PC
• Windows 2000, XP or Vista
• USB port
• CD-ROM Drive
3. Where can I download the latest driver?
Visit www.life-works.com/drivers
4. Where can I find warranty information?
Visit www.life-works.com/warranty
5. How to connect the hardware?
• Gently pull the USB cable from both ends to extend to the desired
length. (Pull again to retract the cable.)
Note: you first remove the mouse from the package, approximately 2 in. (5 cm)
of the cable remains between the mouse and the cable reel. To retract all of the
cable into the reel, extend the cable fully, then grasp the USB connector and
mouse so the cable is pulled tight. With the cable held tight, gently slide the reel
approximately 1 in. (2.5 cm) on the cable toward the mouse. The cable should
now fully retract.
• Connect the USB cable to a USB port on your computer. The drivers for
your mouse load automatically.
6. How to install the software?
• Insert the installation CD into your computer.
• On the screen that appears, click install.
• An Install Shield Wizard dialog box displays. Click Next.
• The Choose Destination Location dialog box displays.
• Click next to accept the default installation location. When installation
completes, the Install Shield Wizard Complete dialog box displays.