iHome IH-M135ZR, IH-M137ZD, IH-M136ZN User Manual

Wireless laser mouse pro

Model # IH-M135ZR, IH-M136ZN, IH-M137ZD

Product Knowledge Base

Frequently Asked Questions (FAQs)

1. What is included in the box?

• wireless laser mouse pro

• mini USB receiver

• 2 AA DURACELL® batteries

• Installation CD

• User manual

2. What are the Features?

• Plug-n-play—no synching needed

• 5 quick launch media buttons

• Low battery indicator

• Horizontal and vertical scrolling

• Programmable buttons

• Cursor speed button—change mouse sensitivity on the fly

3. What are the system requirements?

• Windows® 2000, XP or Windows Vista®

• CD-ROM drive

• USB port

4. How to Setup the Mouse?

Your new mouse

• Zoom out and zoom in—Press to zoom in or out of a photo or document.

• Back and forward —Press back to access the previous page or folder.

Press forward to open the next page or folder.

• Scroll wheel —Move the scroll wheel left or right to scroll horizontally.
Roll the wheel to scroll up and down.

• DPI button —your mouse has two sensitivity settings: standard and high-
performance. High-performance mode allows the cursor to move very

quickly and is useful for activities such as gaming. Press the DPI button to
switch from standard mode to high-performance mode and back. Press
the DPI button for 3 seconds to switch to media remote mode.

• Low battery indicator —this indicator flashes when the batteries need to
be replaced.

Note: Some button functions require installation of the included software.

Note: To use the horizontal (side-to-side) scroll function on a Windows 2000 or
XP computer, you must install the supplied software. Windows Vista users do not
have to install the software to use the horizontal scroll function.

Connect hardware

Remove the battery compartment cover, install 2 AA batteries and replace the
battery compartment cover. (The mouse will operate on a single battery. Install
two batteries to double the operating time.)

• Slide the On/Off switch on the bottom of the mouse to On. The low battery
indicator flashes for 10 seconds.

• Connect the mini USB receiver to a USB port on your computer. The
drivers for your mouse load automatically.