iHome iA5 User Manual
iA5
instruction manual
iA5
Introduction
Thank you for purchasing the iHome iA5, the
app-enhanced alarm clock for iPhone or iPod.
This instruction booklet explains the basic operation and
care of the unit. There are many exciting performance
enhancements available by downloading the free
iHome+Sleep app from the iTunes App Store.
For information on the iHome+Sleep app and how it
works with your iA5, please vist the App Store and
download the app or visit www.ihomeaudio.com/apps.
Note: app is for iPhone and iPod touch only.
Download the FREE iHome+Sleep
app to use these features:
• Social media alerts
• Weather
• Sleep stats
• Interactive alarm settings
Send questions about the iHome+Sleep app to apps@ihomeaudio.com
Using the
iA5
Table of Contents
Controls and Indicators.......................................1
iA5 Display......................................................2
Getting Started .................................................3
Docking your iPhone/iPod ..................................4
Setting the Clock with Time Sync ..........................4
Setting the Clock Manually..................................5
Setting the Alarm ..............................................6
Snooze ...........................................................7
Resetting the Alarm ............................................8
Bedtime Sleep Timer......................................... 8
Playing and Charging iPhone or iPod.................... 9
Using the Line-in Jack..........................................9
Consumer Safety and Product Maintenance..........10
Troubleshooting...............................................13
Warranty.......................................................14
iA5
Controls and Indicators
Top Panel
Front Panel
– button
(decrease
setting)
bedtime
button
Rear Panel
dock
bedtime wakeup
on | auto
power
ZZZ
clock
sync
power/app button
(press and hold to access
product config screen from
iHome+Sleep app
homescreen when app is
running)
snooze/dimmer button
DC jackdisplay on/auto button
alarmeqdisplay
+ button
(increase
setting)
wakeup
button
line-in jack
clock sync buttoneq button
alarm button
1
Display
iA5
Note: Display and indicators depend on mode. The
iA5 is specially designed to work with the
iHome+Sleep alarm clock app. For optimized
compatibility, by default the iA5’s display will automatically deactivate and defer to a docked iPhone or
iPod touch’s display when the iHome+Sleep app is
running (active). To override this and keep the iA5
display on, exit the iHome+Sleep app then press the
display on/auto button located on the back of the
unit. Use the iHome+Sleep app to easily change EQ,
clock sync and alarm settings.
iHome app indicator
(app is active)
current time
(or alarm time)
sleep mode indicator
battery low indicator
alarm indicator
(alarm is on and
will sound at
set time)
pm indicator
(does not appear
when display is set
to 24 hour mode)
2
Using the
iA5
12
RESET
RESET
TEST
TEST
CR2032
Getting Started
1.Plug the Ac adaptor into the DC jack on the back of the iA5
and the other end into a working outlet.
2.For battery backup, insert included CR2032 battery into
battery compartment on the bottom of the unit. Make sure
battery polarity (+/-) matches diagram. In the event of a
power failure, the backup battery will maintain clock and
alarm settings. When the battery low indicator appears on
the display, the battery needs to be replaced with a fresh
battery.
WARNING:
disassembled, shorted, recharged, exposed to water, fire, or high
temperatures. Do not place loose batteries in a pocket, purse, or other
container containing metal objects, mix with used or other battery types,
or store with hazardous or combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and regulations for transport and
disposal.
Lithium batteries can explode or cause burns if
3
Loading...