
HDL95
Sta Quick Start Guide
Included
• HDL95 system
• 100V-240V universal AC adaptor

-1 +1 auto
DST
time zone high low
volume level
DC 12V 2.7A
time sync/set
Set Up
Connect AC adaptor
to DC jack/wall outlet
Remove pull tab from Backup Battery
Compartment located on bottom of the
unit. When Low Battery Icon appears on display,
replace backup battery with 1 fresh CR2450
battery. Keep unit connected to AC power when
replacing battery or you will lose settings.
Remove thumbscrew
and remove back cover
to access sta controls
12V 2.7A
outlet
WARNING: Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, exposed to water, re, or
high temperatures. Do not place loose batteries in a pocket,
purse, or other container containing metal objects, mix with
used or other battery types, or store with hazardous or
combustible materials. Store in cool, dry, ventilated area. Follow
applicable laws and regulations for transport and disposal.

Secure the attached Security Tether to
a wall or other permanent surface.
CAUTION: DO NOT attach to an AC
outlet or cause it to become entangled
with anything that can create a
hazardous situation.
Setting Clock Using Time Sync
a) Connect a Lightning-compatible
iPhone to the Dock
b
b) connect any iPhone to the USB port using
the USB cable that came with the iPhone
a
Or

The unit ships with the Daylight Saving Time (DST) switch in
Auto position, and will automatically adjust when the time
changes in March and November.
Daylight Saving Time
Press the time sync/set Button
on the back of the unit to instantly
set the time on the HDL95.
NOTE: For the fastest, most accurate time setting,
set the clock using Time Sync with
a) a docked iPhone OR
b) an iPhone connected to the USB port
iPhone time is always current because it pings o cell towers;
iPad or iPod are only accurate to the last time they were
synced to a computer.
Make sure the DST switch is in AUTO position.
If you do not have an iPhone or if time sync fails,
set the clock manually.
-1 +1 auto
DST
time sync/set