Ihome B90 User Manual
Model:
MIC
B90
HEADPHONES
Introduction
Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled smartphone
or music player to allow you to wirelessly listen to music and answer phone calls within the normal
10 meter (33 feet) Bluetooth operating range.
What’s Included
• Bluetooth Stereo Headphones
• USB
Charging Cable
Specifications
Bluetooth specification: Supports V4.1+ EDR with Handsfree Profile 1.5, Headset Profile 1.1 and A2DP
Battery: 350mAh
Standby time (unpair
Talk time: up to 16 hours (with fully charged battery)
Music Playing time: up to 12 hours (with fully charged battery)
Operating Distance: up to 10 meters / approximately 33 feet
Certifications: CE, FCC, RoHS, BQB
profile 1.2 (Class ll) and Audio/Video Remote Control Profile AVRP
ed): up to 90 days (with fully charged battery)
• Detachable Audio Cable
Getting Started
1. Controls and Indicators
Right side Left side
2
1
3
5
6
89
4
7
1. Multi-function button: Power On/Off,
Answer/End, Pair and Play/Pause.
2. Power/Pairing/Charging LED Indicator
3. Volume Up (+) Button
4. Skip Track Forward Button ( )
5. Volume Down Button ( - )
6. Skip Track Reverse Button ( )
7. Microphone
8. Micro USB Charging Port
9. Auxiliary Input Jack
2. Charging Your Headphones
IMPORTANT: Your headphones operate on a built-in rechargeable lithium-ion battery. Although the
battery was fully charged when it left our factory, like all rechargeable batteries it can begin to
discharge during periods of non-use. We recommend that you charge the battery for at least 2.5
hours before first time use.
Computer USB port
Computer connected
to working outlet
1. Connect the micro USB plug on the charging cable to the micro USB port on the headphone.
2. Connect the standard USB plug on the charging cable to any standard USB power port such as
found on a notebook computer, or the charging adapter for an iPod, iPhone, etc.
The Power/Charging/Pairing indicator will glow RED while the headphone is charging. The indicator will
turn off when the battery is fully charged.
Reminder: Allow the battery to charge fully before first time use. Normal recharge time should take
about 2.5 hours. When fully charged the battery provides up to 16 hours of working time, or 90 days of
standby time.
Because your B90 headphones use Bluetooth version 4.1 the battery level indicator of the headphones
may also appear on your iPhone home screen, usually adjacent to the phone’s own battery level
indicator, if your specific phone supports this display function.
3. Multi-Function Button (MFB)
Pressing the Multi-function button (MFB) turns the headphones “On”, initiates pairing, answers/ends
phone calls, controls Play/Pause function and turns the headphones “Off’.
4. Switching the Power On and Off
1. Press and hold the Multi-function button for approximately 3 seconds. The voice prompt will say
“Power On” and the LED indicator turns BLUE and flashes two times per second. If the headphones
have not been previously paired to a Bluetooth device, the headphones will enter auto-pairing mode.
2. When the power is “On” press and hold the Multi-function button for approximately 3 seconds. The
voice prompt will say “Power Off”. The LED indicator remains on briefly and then shuts off. This
indicates that the power is “Off”.
5. Manually Pairing With a Bluetooth Enabled Smartphone or Music
Player For The First Time
If your smartphone, music player, tablet, or computer is Bluetooth enabled, you may pair these
headphones with your device to listen to music and make or receive calls as long as the two devices
are within the Bluetooth operating range of approximately 33-feet of each other.
Note: Your headphones must be in the Power “Off” mode to begin the manual pairing process.
1. Make sure that your B90 headphones are switched “Off”. Make sure that your smartphone or music
player is “On”.
2. Press and hold the Multi-function button on your B90 headphones for about 6 seconds until you
hear the “Power On” and “Pairing” voice prompts. The LED indicator begins alternately flashing blue
and red to indicate it is trying to pair with a compatible device.
3. If necessary, turn on the Bluetooth function of your phone or music player so that it begins searching
for a compatible device.
4. “iHome B90” should appear on your phone or music player’s compatible devices list. You may also
see a message such as “Not Paired”. Tap on that message to complete the pairing process. If your
phone or music player asks for a “password” to complete the pairing process, enter ‘0000’ on the
keypad of your phone or music player.
5. When pairing is successful the screen on your phone should show “iHome B90 Connected” or
similar message and you will hear the voice prompt say “Your device is connected”. The LED
indicator on the B90 headphones will begin flashing blue two times per second. Your headphones are
now ready for use.
NOTE: If your B90 headphones ar
“discoverable” after 3 minutes, the headphones will automatically power “Of
6. Auto-Linking With A Previously Paired Device
If your B90 headphones were previously paired with a Bluetooth enabled smartphone or music player
they will attempt to auto-link with that device again whenever that device is within the Bluetooth
operating range.
Press and hold the Multi-function button on your B90 headphones for about 3 seconds until you hear
the “Power On” voice prompt. If a previously paired device is found to be within range and turned ‘On’
the B90 will re-link with it automatically. You will hear the voice prompt say “Your device is connected.”
Note: If no previously paired device is found after 3 minutes the auto-linking function stops and your
B90 headphones shut off automatically to preserve the battery life.
7. Wearing Your Headphones
Your B90 Bluetooth headphones are supplied with padded ear cushions for long lasting comfort. The
headband can be extended to accommodate almost any head size. There are ‘L’ and ‘R’ markings on
the inside of the headband, When the headphones are worn properly the controls will be on your right
side.
USB Adaptor
OR
(not included)
e not able to find a Bluetooth device that is in range and
Controller button
Microphone
f” to preserve the battery.
8. Using Your Headphones
Note: Some of the functions described below may not be supported on your specific smartphone.
Check with your smartphone owner’s manual to confirm the features supported by your phone.
Function
Turn headphones “On”
Enter Pairing Mode
Pairing
Reset Bluetooth
Play / Pause
Skip to next track
Skip to beginning of current track
or go to the previous track.
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the headphones
Last number redial
Answer second call/
call waiting
Turn headphones “Off”
Siri/Google Voice function
Voice command
9. Auxiliary Input Jack
The auxiliary input jack allows you to use your B90 Bluetooth headphones as normal headphones so
that you can listen to music on any non-Bluetooth device that is equipped with a 3.5mm headphone
jack.
Connect the included audio cable to the auxiliary input jack on the
bottom of the ‘L’ earpiece of your B90 headphones, and to the
headphone jack of your auxiliary music source.
Your B90 headphones should be in the Power “Off” mode. Use the
volume and track navigation controls on your music player as your
would with any normal headphones.
Action Required
When headphones are “Off” press and hold the MFB inward for 3 seconds until you hear
the "Power On" voice prompt.
When headphones are “Off” press and hold the MFB inward for 6 seconds until you hear
the "Pairing" voice prompt. The LED indicator flashes blue and red rapidly.
Make sure your Bluetooth device is “On” and in Pairing Mode. When “iHome B90”
appears on your devices menu, select it to complete pairing.
Press and hold the “>>” button for 3-4 seconds to reset headphone and enter pairing
mode again.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Press the >> button during playback
Press the << button playback
Press and hold the “+” button during playback
Press and hold the “ - ” button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will automati-
cally pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and “hang up”.
While the call is in progress press & hold MFB for 2 seconds to transfer the call between
the phone and the headphone.
When phone is paired with headphone but no call is in progress, double press the MFB
to redial the last number
Double press the MFB to place current call on hold and answer an incoming 2nd call.
Double press again as needed to switch between calls.
Press and hold the MFB for 5 seconds until your hear the “Power Off” prompt and LED
indicator shuts off.
Press and hold the “<<” button for 3-4 seconds
While listening to audio, press and hold the “<<” button for 3-4 seconds to send voice
command.
Troubleshooting
1. Reception is noisy or intermittent
Make sure that the headphones and the paired device are within the Bluetooth operating range of
approximately 33-feet. Make sure the headphones are fully charged as well.
2. No Sound
Make sure that your headphones are properly paired and connected with your Bluetooth enabled
smartphone or music player. Refer to the “Pairing” instructions in this manual and in the manual
supplied with your phone or music player if necessary.
The rechargeable battery in your headphones may be exhausted and need to be recharged. Refer to
the “Charging Your Headphones” instructions in this manual.
3. Unable to Pair/Connect
The pairing settings between the headphones and your smartphone or music player may have been
erased or deleted. Follow the “Pairing” instructions in this manual to re-pair and reconnect the devices.
Turn off any other Bluetooth devices that are not being used to reduce external interference.
4. Some Functions Do Not Work
Your specific model of smartphone may not support some of the functions described in this manual.
Refer to the manual supplied with your phone for further information.
Care and Maintenance
Always remember to turn your headphones off if they will not be used for a long period of time. Do
not expose your headphones to extremely hot or cold temperatures for extended periods. Do not
expose them to direct sunlight or leave them in places such as the dashboard of your car on a hot
day. Prevent water or any other liquids from entering the cabinets of your headphones.
Protect Your Hearing
Using these, or any headphones at high volume levels for long periods can result in permanent hearing
damage. Always start listening with volume controls on your headphones and your paired smartphone
or music player at a low level and then gradually increase the volume controls to a comfortable listening level.
Important Notes
It is dangerous and illegal (in some jurisdictions) to use headphones when you are driving a car, riding a
•
bike or motorcycle, or operating a watercraft. Be aware of local laws and regulations.
Do not use these headphones in situations where they might cause distractions or prevent you from
•
hearing warning sounds.
There are no user serviceable parts in these headphones. Do not attempt any service or repairs on your
•
own. Refer to the warranty for service, repair or replacement information.
FCC Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this devic
e may not cause interference, and
(2) this devic
e must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try tocorrect the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada RSS-247. Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-247. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure,
users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de
RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
FCC ID: EMOIB90
IC: 986B-IB90
Limited One Year Warranty
eKids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period
of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first
return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason
of any defect or malfunction during the warranty period, eKids will repair or, at its discretion, replace this product without charge.
This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center
authorized by Customer Service. If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players,
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the
owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to
the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders,
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your eKids product.
For questions or comments please call our toll-free number: 1-800-288-2792
B90_IB_021017-A
Distributed by eKids, LLC
Also visit our website: www.ekids.com
1299 Main Street Rahway, NJ 07065
Printed in China
Loading...