iGo ps002650001 User Manual
FCC Compliance
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Canada Compliance
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numériqué de la classe B est conformé à la
norme NMB-003 du Canada
www.iGo.com
© 2007 Mobility Electronics, Inc. Mobility Electronics iGo is a registered
trademark of Mobility Electronics, Inc. All other brand names and logos are
trademarks of their respective owners. Specifications aresubject to change
without notice. Protected under one or more of the following patents:
5,347,211; 6,064,177; 6,643,158; 6,650,560; 6,700,808; 6,751,109; 6,775,163;
6,791,853; 6,920,056; 6,937,490 and 6,976,885. Other United States and
foreign patents pending. Made in China. P/N 8040405-01 Rev A.
For use with:
User Guide
Congratulations on your iGo®power purchase!
Compatible with most of today's popular gadgets, this
iGo everywhere power solution allows you to power
and charge from any standard wall or in-vehicle outlet.
Lose the clutter of all those individual chargers and
power your mobile phone, Bluetooth
®
headset,
smartphone/PDA, MP3 player, portable gaming device,
digital camera, GPS device and more from this single,
convenient power solution.
Specifications
Wall (AC) Unit
Input Voltage: 100-240 VAC
Dimensions 3.25 x 2.00 x 1.00"
Auto (DC) Unit
Input Voltage: 11.0-16.5 VDC
Dimensions: 3.63 x 1.00 x 1.00"
Retractable Cord
Case Dimensions: 2.17 x 2.60 x 0.93"
Cord Length: 5.0' (1.52m)
Safety Features
Current limit
Short circuit protection
Package Contents
• Wall (AC) unit
• Auto (DC) unit
• Retractable cord
• Travel organizer
(82.55 x 50.80 x 25.40mm)
(92.20 x 25.40 x 25.40mm)
(55.10 x 66.04 x 23.62mm)
Wall (AC)
unit
1. Connect the retractable
light grey cord end to
either the AC or DC unit.
2. Plug the retractable black
cord end to the appropriate
iGo power tip.
3. You can now connect to
the device you wish
to charge.
Pockets for
power tips and
retractable cord
(light grey
end of cord)
Travel organizer
included
Auto (DC)
unit
Note:
Pull cord from both sides.
Retractable
Cord
iGo
®
power tip
(black end
of cord)
(sold separately)
CAUTION: Hold one end of the cable while retracting. Do not
let cord retract freely. Cord may jam on reel or whip back and
forth and cause injury.
Loading...