Ignition Magic Cube 3D User Manual

Magic Cube 3D
User manual
eect panel
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
E-mail: info@thomann.de
Internet: www.thomann.de
14.01.2020, ID: 412145 (V2)

Table of contents

Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 17
4 Installation and starting up................................................................................................................ 18
5 Connections and controls................................................................................................................... 26
6 Operating.................................................................................................................................................... 29
6.1 Starting the device........................................................................................................................... 29
6.2 Main menu.......................................................................................................................................... 29
6.3 Menu overview................................................................................................................................. 36
6.4 Functions in 9-channel DMX mode........................................................................................... 37
6.5 Functions in 14-channel DMX mode........................................................................................ 38
6.6 Functions in 17-channel DMX mode........................................................................................ 39
Magic Cube 3D eect panel
3
Table of contents
6.7 Functions in 81-channel DMX mode........................................................................................ 42
6.8 Functions in 83-channel DMX mode........................................................................................ 43
6.9 Functions in 98-channel DMX mode........................................................................................ 45
7 Technical specications....................................................................................................................... 49
8 Plug and connection assignments.................................................................................................. 51
9 Troubleshooting...................................................................................................................................... 52
10 Cleaning....................................................................................................................................................... 54
11 Protecting the environment.............................................................................................................. 55
Magic Cube 3D
4
eect panel
Magic Cube 3D eect panel
5
General information

1 General information

This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.
Magic Cube 3D
6
eect panel

1.1 Further information

General information
On our website (www.thomann.de) you will nd lots of further information and details on the following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Online guides
Personal consultation For personal consultation please contact our technical hotline.
Service
Use the search function in the electronic version to nd the topics of interest for you quickly.
Our online guides provide detailed information on technical basics and terms.
If you have any problems with the device the customer service will gladly assist you.
Magic Cube 3D eect panel
7
General information

1.2 Notational conventions

This manual uses the following notational conventions:
Letterings
Displays
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are used in this manual.
Magic Cube 3D
8
eect panel
General information
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
Magic Cube 3D eect panel
9
General information
Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
Magic Cube 3D
10
eect panel

2 Safety instructions

Safety instructions
Intended use
This device is intended for use as an electronic lighting eect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o frequently. This device is not suitable for continuous use.
Magic Cube 3D eect panel
11
Safety instructions
Safety
DANGER! Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER! Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or damaged.
Magic Cube 3D
12
eect panel
Safety instructions
DANGER! Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a regis‐ tered electrician.
WARNING! Eye damage caused by high light intensity
Never look directly into the light source.
WARNING! Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
Magic Cube 3D eect panel
13
Safety instructions
NOTICE! Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
Magic Cube 3D
14
eect panel
Safety instructions
NOTICE! Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations.
Only operate the device within the ambient conditions specied in the chapter ‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐ tions and do not switch the device on immediately after it was exposed to tem‐ perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualied service personnel at regular intervals to prevent overheating and other malfunction.
Magic Cube 3D eect panel
15
Safety instructions
NOTICE! Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or re.
NOTICE! Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire hazard!
Only fuses of the same type may be used.
Magic Cube 3D
16
eect panel

3 Features

Features
Special features of this LED panel with 3D eect and segment control:
n 108 RGB SMD LEDs, each 0.8 W n the innovative arrangement of the selectively controllable surfaces creates the illusion of a
magical 3D cube
n exible mounting options for mounting individual independent panels or in combination
in order to realize larger areas
n Control via DMX (six dierent modes), ArtNet (with separately available external controller)
as well as buttons and display on the device
n Automatic mode and sound control n Master / Slave operation
For technological reasons, the light output of LEDs decreases over their lifetime. This eect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Magic Cube 3D eect panel
17
Installation and starting up

4 Installation and starting up

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Magic Cube 3D
18
eect panel
Loading...
+ 42 hidden pages