IGNIS ARL 18 NF 60HZ Daily Reference Guide
Quick guide
EN
THANK YOU FOR BUYING OUR PRODUCT.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
1.
4. 5.
FAN*
You can turn the Fan on/o by pressing the button on the base (as
shown in the gure). If the ambient temperature exceeds
27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows
energy consumption to be optimised.
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. In
Stand-by mode, two dashes light up on the display and the light in the
refrigerator compartment does not turn on.
Note: this does not disconnect the appliance from the power supply.
TEMPERATURE DISPLAY
The display may alternately show the refrigerator compartment
temperature (between 2°C and 8° C) or the temperature of the freezer
compartment (between -16°C and -24°C).
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the STOP ALARM
button.
6.3.
2.
Before using the appliance carefully read the Safety Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
1. Temperature Display
2. Freezer temperature - Fast freeze
3. On/stand-by
4. Refrigerator temperature - Fast cool
5. Turning o the sound alarm
6. Key Lock
KEY LOCK
The key lock can be activated/deactivated by keeping the “Key
lock” button pressed for 3 seconds, until a conrmation sound is heard
(the icon lights up). If you press any button while the key lock is active,
you will hear a sound and the “Key Lock” icon will start to ash.
REFRIGERATOR COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature with the FRIDGE button.
FAST COOL
Press the “Fridge” button for 3 seconds before placing a large
quantity of fresh food in the refrigerator compartment. When the
function is turned on, the
o automatically after 6 hours, or manually by pressing the “Fridge”
button for 3 seconds.
FREEZER COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature with the FREEZER button.
FAST FR EEZE
Press the FREEZER button for 3 seconds 24 hours before putting
large quantities of food to freeze in the freezer compartment. When
the function is turned on the icon lights up
The function turns o automatically after 48 hours, or manually by
pressing the FREEZER button again for 3 seconds.
Note: avoid a direct contact between the fresh food and the food that is
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
icon will be displayed. The function turns
.
* Available only on certain models
HOW TO STORE FOOD AND BEVERAGE
TROUBLESHOOTING
Legend
TEMPERATURE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The inside light does not
work.
The temperature inside the
compartments is not low
enough.
There is water on the
bottom of the refrigerator
compartment.
The front edge of the
appliance, at the door striker
seal, is hot.
The appliance may be in On / Stand-by
mode.
There may be an appliance power
supply problem.
The light may need to be replace. Models with LED lights: contact the authorised Technical Assistance
The appliance may be in On / Stand-by
mode.
There could be various causes (see
“Solutions”).
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
This is not a defect. It prevents
condensation from forming.
Turn the appliance on pressing the On/Stand-by button. Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are ecient;
• the power cable is not damaged.
Service.
Turn the appliance on pressing the On/Stand-by button.
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation of the appliance is
ensured.
Maintenance").
No solution is necessary.
The red
and a sound signal is
activated
* Available only on certain models
icon is ashing
Door open alarm
It is activated when the refrigerator and/
or freezer compartments door remains
open for a prolonged period of time.
To turn the sound signal o, close the open door of the product.
Loading...