I GEN HEALTHCARE IGEN3 User Manual

Partie « The I-GEN SEAL »

[Stamp I-GE HEALTHCARE QUALITY]

This seal is your assurance that this product meets I-GEN standards for
excellence in workmanship, reliability and quality.

[Stamp GREEN PRODUCT]

This seal certifies that this product meets the environmental standards of the I­GEN quality chart. ZOON+ does not contain any battery to charge since they
are included and rechargeable via USB.

PART 1: Intro + Handbook of quick utilization

PRESENTATION TEXT

I-GEN goes beyond the universe of pleasure with a new concept as sexy as
innovative.
ZOON : a new generation of revolutionary sensual toys developed by the I-GEN
experts !

Pure design, perfect ergonomics, extreme sophistication, ZOON+ is the first sensual

toy remotely controlled thanks to its remote control or even… from thousands of
kilometres away through Internet!

With a simple click, your lover will experience the most outstanding ZOON’s
vibrations. At home, in the restaurant, in the office, at the other corner of the world,
single, in couple and maybe more, « e-zoon » without borders…

Let your imagination free, and join the ZOONERS’ community: with ZOON+ the e­sexual revolution is in motion!

www.i-zoon.com

INSTRUCTIONS FOR
USE

Thank you for choosing ZOON+!

Before going any further, take few minutes and read the instructions for use. Uncover how to get the
most benefits out of your newly acquired pleasure object.

Notice: more detailed instructions for use of ZOON+ in the TECHNICAL USER MANUAL

To get more information about the products commercialized by I-GEN and about
the products range ZOON log onto our website: www.i-zoon.com

CONTENT OF THE ZOON+ BOX

Schéma avec chaque accessoire

. ZOON+
. A dual USB cable
. A remote control
. A charger
. A box

STARTING UP THE ZOON+

Schéma pour chaque étape

Important: Follow these steps for a classical use, alone or in couple (local mode) and
for at-a-distance use via Internet

1/ Plug in the device
Plug in the USB cables in the remote control and the ZOON+ charger.

2/ Loading of ZOON+
Put ZOON+ on your loader. A small red light blinks when it is loading.
When the light stops blinking, ZOON+ is loaded.

The loading length is about 3 hours

Once loaded, you can unplug and store the dual USB cable in your box.

3/ Synchronization of ZOON+ with the remote control
Press the button I-GEN of ZOON+ until it blinks rapidly.
Press within a very small interval on any button of the remote control.
The I-GEN button of ZOON+ blinks 3 times slowly, the synchronization is active.

4/ Starting up ZOON+
Press the key I-GEN on the remote control to start ZOON+
Press the keys + or – of the remote control and make the vibrations progress at your

own rhythm.

→ To stop the vibrations, press the key [PICTO] of the remote control

USING ZOON+ VIA INTERNET

Note: Mrs ZOON should be the first to follow the steps

. Preliminary step to follow for Mrs ZOON

To do only once: installation of a pilot available on our website within few seconds

- Log onto our website http://www.i-zoon.com

- Click on the icon: Install the pilot → Stay connected

. Steps to follow for Mrs ZOON

→ Switch on ZOON+: Press the key I-GEN of the remote control (cf. 4/ Starting up ZOON+)

- Stay connected on our website, click on the icon « Mrs ZOON »

- Click on the window: 'Please connect your device to your PC'
→ At this stage, you can connect the USB cable onto the remote control and your

PC.

- Click on OK: A unique and confidential code appears
Communicate this code to your partner on the phone, through a chat, skype … so that he could make
your ZOON+ vibrate from a distance.

. Steps to follow for Mr ZOON

- Go on the website http://www.i-zoon.com

- Click on the icon « Mr ZOON »

- Click on OK

- A window appears: ‘Submit authentication code’: Log in the confidential code

given by you partner

- Click on OK