IGEL Technology GmbH IGEL Universal Desktop Converter 2 17.12.2013
User Manual
2
IGEL Technology GmbH IGEL Universal Desktop Converter 2
About this manual
This document describes the procedure for installing and using the IGEL Universal Desktop Converter 2
(UDC2) based on version 5.01.110.
This user guide comprises of the following units:
Installing firmware and licenses
How to install the firmware and the corresponding
licenses.
Deployment
How to install the firmware on a number of devices.
Licensing overview
How to license the firmware.
Formatting and meanings
The following formatting is used in the document:
Hyperlink
Internal or external links
Proper names
Proper names of products, firms etc.
GUI text
Items of text from the user interface
Menu → Path
(Context) menu paths in systems and programs
Entry
Program code or system entries
Keyboard
Commands that are entered using the keyboard
Note regarding operation
Warning: Important note which must be observed
3
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Contents
1. General Information ...........................................................................................................................................4
2. Installing firmware and licenses.........................................................................................................................5
2.1. Preparing ........................................................................................................................................ 5
2.2. Installing ......................................................................................................................................... 6
2.3. Emergency procedure (ISO image) ................................................................................................ 7
3. Deployment .......................................................................................................................................................8
3.1. Duplicating UDC stick ..................................................................................................................... 8
3.2. Deployment Appliance ................................................................................................................. 10
3.3. Deployment with Microsoft RIS ................................................................................................... 16
4. Licensing overview ..........................................................................................................................................20
4.1. Licensing with the Universal Management Suite (UMS) ............................................................. 21
4.2. Licensing via smartcard and UMS ................................................................................................ 23
5. Upgrading from UD OS to UD OS 2 ...................................................................................................................25
6. Index ...............................................................................................................................................................26
4
IGEL Technology GmbH IGEL Universal Desktop Converter 2
1. General Information
The IGEL Universal Desktop Converter Software (UDC2) allows the migration of existing PC and thin
client hardware to a homogeneous IGEL Universal Desktop thin client infrastructure.
Essentially, you have two options for installing the firmware on your devices:
• locally on the device itself (page 5)
- via a UCD stick purchased from IGEL Technology
or
- via a USB stick that you set up yourself by downloading the UDC2 stick software
• via remote administration (page 8)
In both cases, you will need
• the IGEL Universal Desktop Converter software
• the IGEL Universal Desktop OS 2 firmware
• the associated licenses.
You will receive the complete package when you purchase the UDC stick from IGEL Technology. The stick
contains:
• the IGEL Universal Desktop Converter (UDC2) software
• the IGEL Universal Desktop OS 2 firmware
• a SIM card with the licenses ordered
• this installation manual
• the IGEL Universal Desktop manual (Linux)
• the IGEL Universal Management Suite (Windows) with documentation
In order to use IGEL Universal Desktop OS 2, you will need the appropriate licenses. Licenses for the
previous version of the IGEL Universal Desktop OS are no longer valid for the current version. You will
need a new SIM card or new licenses issued by IGEL Technology.
5
IGEL Technology GmbH IGEL Universal Desktop Converter 2
2. Installing firmware and licenses
In order to install the IGEL Universal Desktop OS 2 firmware, you must make a number of preparations:
2.1. Preparing
Remove the slot cover on the UDC stick and insert the SIM card with the licenses. 1.
Change the BIOS boot order of your target device so that it boots from USB. 2.
Abbildung 1: Preparing the installation
Insert the UDC stick into the USB socket on your target device. 3.
Start the system. 4.
The target device boots from the UDC stick and the boot menu opens:
Abbildung 2: UDC boot menu
The following options are available to you in the boot menu:
6
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Boot IGEL UD Converter
Starts the firmware installer image.
Autostart after 1 minute
Boot Converter (verbose)
Shows messages during the boot process
Boot from Hard disk
Boots from the hard disk
Memory Test
Performs a memory test
The following function buttons are available to you in the boot menu:
F1
Open help for the selected option
F2
Select language for the current menu
F3
Change video mode (DDC setting) -
the DDC mode is enabled by default
DDC is enabled by default when the Universal Desktop OS 2 boots. If necessary, you can change this
option again via the IGEL Universal Management Suite or in the local setup.
2.2. Installing
Boot the Universal Desktop Converter in the standard mode or in verbose mode. 1.
Select a language for the installation and confirm the license information. 2.
Select a target drive on which you would like to install the Universal Desktop OS: internal, external
3.
HDD, flash or USB drive.
All existing data on the target drive will be deleted during installation.
Abbildung 3: Security check
Click on Install Firmware to begin the installation process. 4.
Shut down the system once the installation is complete. 5.
Remove the UDC stick and reboot with the target drive (IGEL Linux). 6.
7
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Remember to change back the BIOS boot order.
Abbildung 4: Restarting with target drive
Your device will now run with IGEL Universal Desktop OS 2. If you have installed the firmware using the
IGEL UDC stick with SIM card in the manner described, your device will now be equipped with up-to-date
licenses and can be registered in the IGEL UMS. For more information about licenses, see (page 20).
Back up all license files from [USB stick]:\licenses for later use. You should back up all license
filed before formating the USB stick, especially if you use UDC2Stick.exe.
Further information about the system and the IGEL Universal Management Suite can be found in the
documentation on the UDC stick or in the IGEL Knowledge Base edocs.igel.com.
2.3. Emergency procedure (ISO image)
If the system does not boot from the UDC stick, you can use an emergency procedure in order to install the
IGEL Universal Desktop OS 2. You will find the relevant ISO image on the UDC stick.
Use the ISO file to create a CD and then boot the system from the CD.
The UDC stick with the licenses must also be connected because the ISO image provides only the
UDC2 software and no licenses. Alternatively, you can order the licenses from IGEL Technology and
distribute them to the target devices via the IGEL UMS, see (page 21).
The installation process begins, see Installing (page 6).
8
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3. Deployment
There are various ways in which you can install the IGEL Universal Desktop OS 2 on a number of
computers.
Duplicating the UDC stick using
UDC2Stick.exe (page 8)
Distribute the firmware to all computers with the help of additional USB
sticks.
Deployment Appliance (page 10)
Roll out the firmware centrally using a deployment appliance.
Deployment with Microsoft RIS (page
16)
Use the Remote Installation Services (RIS) and the PXE boot
mechanism to distribute the software to the target devices via remote
administration.
3.1. Duplicating UDC stick
Copy the UDC stick with the installer image to a standard USB stick and install the firmware on your
target devices with these additional copies.
Distribute the licenses via the IGEL Universal Management Suite (page 21).
Abbildung 5: Duplicating UDC2 stick
9
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.1.1. Requirements
• The UDC2Stick.exe duplication tool can be found on the UDC stick under Software &
Documentation/Software/UDC2Stick/.
• The software runs on the following Windows systems:
Windows XP, Windows Vista, Windows 7 and Windows 2003/2008 Server.
• The USB target drive must have a capacity of at least 1 GB.
Launch the program as an administrator.
3.1.2. Duplicating
To duplicate the firmware, proceed as follows:
Copy the firmware onto a USB stick from
- the IGEL UDC stick
or
- our download server www.myigel.biz
Copying firmware from the UDC stick
Connect both USB sticks: the IGEL UDC stick and the target USB stick. 1.
Launch UDC2Stick.exe from the following directory: 2.
Software & Documentation/Software/UDC2Stick/
Select the USB stick as the Destination. 3.
Enable Format with FAT32 and Make Bootable. 4.
Select Quick Format if you are using a target drive that is to be formated quickly. 5.
Optionally, you can copy the Software & Documentation files to your target drive too.
Click on Duplicate Source to Destination USB Stick. 6.
Your target device will be formated using the FAT32 file system and made bootable.
All relevant files will be copied from the source to the target device.
Close the program once the process is complete or copy the firmware to another USB stick. 7.
Copying firmware from the download server
Download the current UDC2Stick.zip file from the IGEL download server www.myigel.biz 1.
under IGEL_UNIVERSAL_DESKTOP_CONVERTER/UDC2_Stick_V5/.
Unzip all the files and begin the procedure – in this case without a UDC stick – in order to create a 2.
bootable USB stick with IGEL Universal Desktop OS 2.
10
IGEL Technology GmbH IGEL Universal Desktop Converter 2
If you download the firmware from the IGEL server, you will receive the UDC2 software, but with no
licenses. These must be ordered separately and distributed to the target devices via the IGEL UMS, see
(page 21).
3.2. Deployment Appliance
Ideally, the Universal Desktop OS 2 firmware should be distributed via the deployment appliance if a
large number of target devices are to be converted and transferring the firmware to each one via USB stick
would involve too much work.
Define any computer as the administrator computer. What is important is that this computer is in the
same network as the computers that are to be converted.
Load onto this computer:
- either VMware Workstation, VMware Player or Oracle VM VirtualBox
- the IGEL OVA file with the PXE-Server-VM
- the UDC2 software
You can now roll out firmware to all computers within your network from this administrator computer.
Abbildung 6: Deployment Appliance
The PXE server, also known as the appliance server, is configured via a web interface. The actual
administration, the setup and the firmware rollout are carried out by the PXE server itself.
11
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.2.1. Importing OVA file
Download the Open Virtualization Appliance (OVA) file from our download server and import it into the
virtualization environment. We show you the procedure here using the VMware Workstation Version 10
as an example:
Open the browser on the administrator computer. 1.
Go to IGEL_UDC_DEPLOYMENT_APPLIANCE under http://myigel.biz. 2.
Download the ova file to the administrator computer. 3.
In the VMware Workstation, click on File→Open in order to open the 4.
IGEL_UDC_Deployment_Appliance_[Version].ova file.
The Import Virtual Machine window opens:
5.
Abbildung 7: VMware Workstation 10 import wizard
Give the name and location of the virtual machine. 6.
Click on Import to begin the import process. 7.
Follow the wizard through the import process. 8.
Check the network settings for connectivity, Bridged must be set. 9.
12
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.2.2. Configuring PXE-Server-VM
Switch on the virtual machine and launch the VMware Console in order to configure the settings. 1.
Abbildung 8: VMware Console
These shortkeys can be used to perform the following actions:
1
Configure network
2
Set DHCP range
P
Change password for the web interface
Y
Apply settings
Shift + T
Confirm change in the deployment type
Press 1 to configure the virtual appliance. 2.
13
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Give the IP address, netmask and gateway IP.
3.
Abbildung 9: Configuring virtual appliance
Confirm your settings by pressing Y . 4.
Press 2 to set up the DHCP range for the server. 5.
Enter the first IP address, last IP address and lease time. 6.
Confirm your settings by pressing Y . 7.
The DHCP server is enabled and is ready to assign an IP address from the address range to target
devices.
3.2.3. Uploading firmware
Launch the browser and bring up the web frontend of the PXE server via its IP address: 1.
http://[IP address of the server].
The default password is: igel. After the dial-up, change the password (page 15).
14
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Upload the UDC2Stick_[version].zip file to the PXE server.
2.
Abbildung 10: Selecting firmware
Warning: The upload procedure can take a few minutes! Wait until the system reports that the process is
complete and the firmware was loaded successfully.
Wait while this is shown:
Wait until this message appears:
Only now was the upload successful and the firmware prepared for the rollout.
Bear in mind the effects that the new DHCP/PXE server can have on your network and the connected
devices: Each computer that boots the image can install IGEL Universal Desktop OS 2. All locally saved
data will be lost during the installation.
Ensure that no other DHCP servers are running within the network, otherwise this may result in
malfunctions.
IGEL UDC will now be deployed as the boot image for each computer that boots with the PXE option.
15
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.2.4. Changing password
After dialing up using the default password igel, you should change the password:
Press P . 1.
Enter the new password and confirm it. 2.
Your new password is secret and will not be displayed in the console.
Abbildung 11: The changed password will not be shown.
3.2.5. Unattended installation
Normally, you would distribute the firmware to the individual clients during an attended installation. This
would mean that you need to target each individual client manually.
Instead, you can enable the unattended installation function:
Press Shift + T to change the deployment type.
With an unattended installation, the PXE server rolls out the firmware to every client in the same network.
This is very useful if you would like to convert every computer within the network.
Please note: The unattended installation function starts the installation automatically when the computer
with the IGEL UDC image is started. Each device that boots with this image will install the IGEL Universal
Desktop OS 2 firmware without further notice. In the process, all existing data stored locally will be
deleted.
In order to avoid the loss of unsecured data, an additional security check will ask you to confirm that you
really do want to change the deployment type.
Abbildung 12: Changing deployment type
Press Y to confirm the change.
16
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.2.6. Installing the UD OS
You have chosen an unattended installation.
Ensure that the BIOS of your target device is set to network installation. Details of further system
requirements can be found in the official UDC data sheet available at http://www.igel.com.
Boot your target device with the IGEL UDC image.
The UDC installation process will begin after a 10 second time out.
If the procedure is successful, IGEL Universal Desktop OS 2 will be installed on your device.
Now import the licenses (page 20).
3.3. Deployment with Microsoft RIS
In order to manage the installation of the Universal Desktop OS 2 centrally, you can also use Microsoft's
Remote Installation Services (RIS) with PXE boot mechanism. This allows you to install the software on
your target devices via remote access.
Abbildung 13: Distribution via RIS deployment
17
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.3.1. Preparing
Download software and firmware to the server:
Download the UDC boot image udc_[version]_ris.zip from the IGEL download server
http://myigel.biz under IGEL_Universal_Desktop_Converter/ris_deployment/UDC2_V5.
Download the firmware image os_[version]_public.zip from the IGEL download server
http://myigel.biz under IGEL_Universal_Desktop_Converter/updates/UDC2_V5.
Unzip the software and firmware on the server:
Unzip the udc_[version]_ris.zip file to the image directory of your RIS server.
The new image will be saved in the igel_udc path.
Unzip the os_[version]_public.zip file to the firmware directory of the IGEL UDC as shown
in the screenshot:
Abbildung 14: Firmware directory
18
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.3.2. Configuring
IP address
Open the default file in the path: igel_udc\i386\templates\boot\pxelinux.cfg\
Set the IP address of the RIS server in the following line (both sections – Label Linux and Label Verbose):
udc_url=tftp://[IP address]/setup/english/images/
igel_udc/i386/templates/firmware/os.inf
Unattended installation
This configuration file provides the parameter udc_unattended which allows the installation of IGEL
Universal Desktop OS 2 to begin automatically during the system boot. The default setting for the
installation process is udc_unattended=false, i.e. the installation must be confirmed on the remote
device or target device.
If udc_unattended=true is set, the installation will begin automatically as soon as the device with
the IGEL UDC image is booted. A device that boots with the image will install IGEL Universal Desktop OS
2 without further notice. All locally saved data will be deleted.
Restart your RIS.
IGEL UDC2 is available as a boot image to each device that boots with the PXE option.
Abbildung 15: Windows deployment services
19
IGEL Technology GmbH IGEL Universal Desktop Converter 2
3.3.3. Installing and licensing
If a target device with the IGEL UDC2 image boots and the unattended installation mode is set, the UDC2
installation process will be shown briefly and will then begin automatically:
Abbildung 16: IGEL UDC boot mask
To license the firmware, use the IGEL Universal Management Suite licensing service as described in the
chapter Licensing with the Universal Management Suite (UMS) (page 21).
20
IGEL Technology GmbH IGEL Universal Desktop Converter 2
4. Licensing overview
The Universal Desktop OS 2 needs its own licenses! The licenses for the previous IGEL Universal Desktop
OS are not valid for the new firmware. Conversely, the new licenses are not valid for the old firmware.
The licenses are linked to the MAC address of the target system and cannot be transferred to another
system.
The new licenses can be found on the SIM card for the UDC stick. If you have downloaded the firmware
from the Internet or distributed it via the UDC2Stick.exe file, the licenses for your target computers must be
ordered from IGEL Technology. More information is available here (page 21).
However, the previous licenses will not lose their validity. This means that you can install the previous
version of the current firmware at any time and continue working with the previous licenses.
You have the following options for installing and licensing the Universal Desktop OS 2 firmware on your
target devices:
Installing firmware
Licensing
A
Directly on the target device via UDC stick
Via SIM card in the UDC stick
B
Directly on the target device via USB stick with
UCD2Stick.exe
Distributing a license from the SIM card
or ready-to-use licenses from IGEL
Technology via the UMS
C
Distributing via deployment appliance
D
Distributing via RIS deployment
If you reinstall the UDC firmware via the UDC stick, you will merely need to insert the SIM card into the UDC
stick. During the installation, a license file for your hardware will be generated on the UDC stick with the
help of a license from the SIM card. More information is available here (page 6).
In all of the cases described above, you can distribute the licenses via the IGEL Universal Management
Suite.
21
IGEL Technology GmbH IGEL Universal Desktop Converter 2
4.1. Licensing with the Universal Management Suite
(UMS)
Requirements:
• The IGEL Universal Desktop OS 2 must already be installed on the target devices.
• The target devices are registered in the UMS.
To order licenses from IGEL Technology and distribute them to your target devices via the UMS:
Find out which clients require the new license.
Send the MAC addresses of the relevant clients to IGEL Technology GmbH.
IGEL will provide you with the corresponding licenses, prepared in such a way that they can be rolled
out automatically via the UMS.
Proceed as follows:
Click on System→Manage Licenses in the UMS Console. 1.
The Manage Licenses window opens:
Abbildung 17: Managing licenses
22
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Click on Export MAC List in order to export MAC addresses to a csv file. The following options will help
2.
you to filter your clients:
Abbildung 18: Filtering MAC addresses
Send the csv file to IGEL Technology GmbH in order to request license files for the selected devices. 3.
IGEL Technology will send you the new license file for the relevant MAC addresses.
Click on Add (+) in the Manage Licenses window in order to upload the license file. 4.
Abbildung 19: Uploading license file
Search through your directories for the lic file. 5.
Click on OK to upload the new file to the UMS server. 6.
When you restart the target device, it will receive the new license from the server.
23
IGEL Technology GmbH IGEL Universal Desktop Converter 2
4.2. Licensing via smartcard and UMS
Requirements:
• The IGEL Universal Desktop OS 2 must already be installed on the target devices.
• The target devices are registered in the UMS.
• The driver for the smartcard reader is installed – it can be found on the UDC stick.
To generate licenses from the smartcard, proceed as follows:
Insert the SIM card with the licenses into the UDC stick. 1.
Connect the UDC stick to the device on which the UMS Console runs. 2.
Click on System→Manage Licenses in the UMS Console. 3.
The Manage Licenses window opens:
Abbildung 20: Managing licenses
Click on Issue License from the Smartcard and confirm your action. 4.
A list of available licenses is available under License Information.
The available target devices are listed under Thin Clients.
Select the devices for which you require a license. 5.
Click on Issue Licenses. 6.
The licenses will be generated by the UDC stick.
24
IGEL Technology GmbH IGEL Universal Desktop Converter 2
Start the devices twice in order to enable the licenses and the associated functions.
7.
The product ID indicates whether the licensing has worked.
A license is saved at the following three locations:
• On the target device
• In the UMS
• On the UDC stick
If you would like to delete the license for whatever reason, you must delete it in all three locations.
25
IGEL Technology GmbH IGEL Universal Desktop Converter 2
5. Upgrading from UD OS to UD OS 2
When updating from your previous Universal Desktop firmware to UD OS 2 (version 5.x), you may need to
perform the update procedure twice:
Updating the firmware of your devices to version 4.13.100 or higher.
Upgrading to UD OS 2.
From firmware version 4.13.100 you can upgrade directly to UD OS 2.
The upgrade from firmware version 4.x to 5.x must be performed manually. The automatic Universal
Firmware Update does not work in this case.
Preparation
First of all, you need to order the new UD OS 2 licenses:
Find out which clients require the new license.
Send the MAC addresses of the relevant clients to IGEL Technology GmbH. For further information see
Licensing with the Universal Management Suite (page 21).
The licenses for the previous IGEL Universal Desktop OS are not valid for the new firmware. However,
they will not lose their validity. This means that you can install the previous version of the firmware at any
time and continue working with the previous licenses.
Manual update procedure
Perform the following steps twice - once in order to update your old system and then once in order to
upgrade your system to UD OS 2:
Go to www.myigel.biz and download the desired firmware image from the IGEL server. 1.
Unzip the ZIP file. 2.
Save all files in the directory provided either on your local FTP/HTTP server or on a drive which is 3.
accessible from the client (e.g. a USB stick, NFS share etc.).
Click System→Update→Firmware Update under Configuration in the IGEL setup. 4.
Configure the necessary settings. 5.
Save your changes and click Update firmware. 6.
The update will now proceed automatically.
For further information, see the System settings→Update section in the IGEL UDLX user manual.
See also our Best Practice documents concerning the IGEL Linux firmware update at the IGEL Knowledge
Base http://edocs.igel.com.
Some of our support FAQs also deal with the firmware update procedure.
26
IGEL Technology GmbH IGEL Universal Desktop Converter 2
6. Index
A
About this manual ................................................ 2
C
Changing password ............................................. 15
Configuring ......................................................... 18
Configuring PXE-Server-VM ................................ 12
D
Deployment .......................................................... 8
Deployment Appliance ....................................... 10
Deployment with Microsoft RIS ......................... 16
Duplicating ............................................................ 9
Duplicating UDC stick ........................................... 8
E
Emergency procedure (ISO image) ....................... 7
F
Formatting and meanings..................................... 2
G
General Information ............................................. 4
I
Importing OVA file .............................................. 11
Installing ............................................................... 6
Installing and licensing ....................................... 19
Installing firmware and licenses ........................... 5
Installing the UD OS ............................................ 16
L
Licensing overview ............................................. 20
Licensing via smartcard and UMS ....................... 23
Licensing with the Universal Management Suite
(UMS) .................................................................. 21
P
Preparing ........................................................ 5, 17
R
Requirements ....................................................... 9
U
Unattended installation ..................................... 15
Upgrading from UD OS to UD OS 2 .................... 25
Uploading firmware ........................................... 13
Loading...