IFM Electronic E70588, E70600 Installation Instructions Manual

Installation instructions

Quad M12

E70588

Quad

E70600

UK

7390873/00 03/2014

1 Functions and features

• The Quad module is used to open an AS-i spur or for additional voltage supply
(current rating 8 A).

• With the Quad M12 module the AS-i voltage and external voltage can be
tapped via the M12 socket (current rating 4 A).
Pin connection of the M12 socket:

pin 1 AS-i +

12

5

4

3

pin 2 0 V
pin 3 AS-i ­pin 4 + 24 V
pin 5 functional earth

2 Installation

► Disconnect power.

2.1 Installation of the lower part

► Choose a plane mounting

surface. The entire bottom of
the module must lie flat on the
mounting surface.

► Screw the lower part onto the

mounting surface. To do so,
use the mounting holes (1)
and M4 mounting screws with
washers M4 (not supplied with
the device). Tightening torque

2.3...2.5 Nm.

► Place the profile seals (3) into the slots (2) of the module lower part. If

the module is at the end of the cable run, the blanking seals (4) must
be used to ensure the IP 65 protection rating.

LINE 1

LINE 2

2