IFM Electronic E70377 Installation Instructions Manual

Installation instructions

Flat cable splitter

E70377

UK

80275346 / 00 06 / 2018

1 Preliminary note

Technical data, approvals, accessories and further information at
www.ifm.com.

1.1 Symbols used

► Instructions
→ Cross-reference

Important note
Non-compliance may result in malfunction or interference.

Information
Supplementary note.

2 Safety instructions

• Read this document before setting up the product and keep it during the entire
service life.

• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.

• Only use the product for its intended purpose (→ Functions and features).

• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.

• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.

• Protect units and cables against damage.

3 Functions and features

The FC splitter is used to add

- an AS-i spur (yellow / yellow)

- or a spur for the external auxiliary voltage (black/black)

2