IFM Electronic dn1030, dn1031 User Manual

Installation instructions
AC/DC power supplies
single phase
Power Supply
DN1030 DN1031
7390798 / 00 08 / 2011
2
Contents
1 Preliminary note ��������������������������������������������������������������������������������������������������� 3
1�1 Notes on this document ��������������������������������������������������������������������������������� 3 1�2 Symbols used ������������������������������������������������������������������������������������������������3 1�3 Warning signs used ���������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������4
2�1 General ���������������������������������������������������������������������������������������������������������� 4 2�2 Installation and connection ����������������������������������������������������������������������������4 2�3 Tampering with the device �����������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������4
4 Installation������������������������������������������������������������������������������������������������������������5
4�1 Installation position of the device �������������������������������������������������������������������5 4�2 Place device onto the DIN rail �����������������������������������������������������������������������6 4�3 Remove the device ���������������������������������������������������������������������������������������� 6
5 Electrical connection �������������������������������������������������������������������������������������������� 7
5�1 Using the spring terminals �����������������������������������������������������������������������������7 5�2 Core cross sections ���������������������������������������������������������������������������������������8 5�3 DC OK output ������������������������������������������������������������������������������������������������8
5�3�1 Switching characteristics ����������������������������������������������������������������������8 5�4 External fuse �������������������������������������������������������������������������������������������������� 9 5�5 Parallel connection ����������������������������������������������������������������������������������������9
6 Operating and display elements ������������������������������������������������������������������������10
6�1 LED states ���������������������������������������������������������������������������������������������������10
7 Operation ����������������������������������������������������������������������������������������������������������� 10
8 Technical data ���������������������������������������������������������������������������������������������������� 11
8�1 Data sheets ������������������������������������������������������������������������������������������������� 11
9 Maintenance, repair and disposal ���������������������������������������������������������������������� 11
10 Approvals/standards ���������������������������������������������������������������������������������������� 11
3
1 Preliminary note
1.1 Notes on this document
This document applies to devices of the type "power supply" (art� no�: DN103x)� It is part of the device and contains information about the correct handling of the product�
This document is intended for qualified electricians� These specialists are people who are qualified by their training and their experience to see and to avoid possible hazards that may be caused during operation of the device�
► Read this document before using the device� ► Keep this document during the service life of the device�
1.2 Symbols used
Instructions > Reaction, result […] Designation of pushbuttons, buttons or indications Cross-reference
Important note Non-compliance can result in malfunction or interference�
Information Supplementary note
1.3 Warning signs used
WARNING
Warning of serious personal injury� Death or serious irreversible injuries may result�
CAUTION
Warning of personal injury� Slight reversible injuries may result�
NOTE
Warning of damage to property�
4
2 Safety instructions
2.1 General
► Observe these operating instructions� ► Adhere to the warning notes on the product�
Non-observance of the instructions, operation which is not in accordance with use as prescribed below, wrong installation or incorrect handling can affect the safety of operators and machinery�
2.2 Installation and connection
The device must only be installed, connected and put into operation by a qualified electrician as the safe function of the device and machinery is only guaranteed when installation is correctly carried out� The installation and connection must comply with the applicable national and international standards� Responsibility lies with the person installing the device�
2.3 Tampering with the device
Tampering with the device is not allowed and will lead to an exclusion of liability and warranty� Tampering with the device can affect the safety of operators and machinery�
► Do not open the device� ► Do not insert any objects into the device� ► Prevent metal foreign bodies from penetrating�
3 Functions and features
● The device is used for the regulated 24VDC voltage supply of industrial controllers, sensors, actuators or measuring systems�
● It is intended for installation in a dry, closed environment (e�g� control cabinet)�
► Observe the connection values and the permissible environmental conditions
→devicelabelordatasheet.
WARNING
Do not use the device in applications where a malfunction of the device presents a danger to people�
Loading...
+ 7 hidden pages