IFM Electronic ANT411, ANT410 Installation Instructions Manual

Installation Instructions
RF identification system
Read/write head
ANT410
ANT411
706348/ 00 07 / 2013
UK
2
Contents
1 Preliminary note ��������������������������������������������������������������������������������������������������� 4
1�1 Symbols used �����������������������������������������������������������������������������������������������4
2 Safety instructions �����������������������������������������������������������������������������������������������4
2�1 General ��������������������������������������������������������������������������������������������������������� 4 2�2 Radio equipment ������������������������������������������������������������������������������������������5 2�3 Interference of electronic and medical devices ��������������������������������������������5
3 Functions and features ����������������������������������������������������������������������������������������5
4 Functions �������������������������������������������������������������������������������������������������������������5
4�1 Operating principle ���������������������������������������������������������������������������������������5 4�2 Overview �������������������������������������������������������������������������������������������������������6
5 Installation������������������������������������������������������������������������������������������������������������6
5�1 General installation instructions ��������������������������������������������������������������������6 5�2 Notes on ID tag mounting ����������������������������������������������������������������������������� 6 5�3 Avoiding interference ������������������������������������������������������������������������������������7 5�4 Mechanical design ���������������������������������������������������������������������������������������� 7 5�5 Fixing ������������������������������������������������������������������������������������������������������������7 5�6 Mounting distances ���������������������������������������������������������������������������������������8
5�6�1 ANT410 �������������������������������������������������������������������������������������������������8 5�6�2 ANT411 ������������������������������������������������������������������������������������������������� 8
5�7 Positioning of the ID tags ������������������������������������������������������������������������������9
5�7�1 ANT410 �������������������������������������������������������������������������������������������������9 5�7�2 ANT411 ������������������������������������������������������������������������������������������������� 9
6 Electrical connection ������������������������������������������������������������������������������������������ 10
6�1 Wiring ���������������������������������������������������������������������������������������������������������10 6�2 UL approval ������������������������������������������������������������������������������������������������10
7 Display elements ����������������������������������������������������������������������������������������������� 11
8 Operation ����������������������������������������������������������������������������������������������������������� 11
9 Dimensions �������������������������������������������������������������������������������������������������������� 12
9�1 ANT410 �������������������������������������������������������������������������������������������������������12 9�2 ANT411 ������������������������������������������������������������������������������������������������������� 12
10 Technical data �������������������������������������������������������������������������������������������������� 12
3
UK
11 Maintenance, repair and disposal �������������������������������������������������������������������� 12
12 Approvals/standards ����������������������������������������������������������������������������������������13
12�1 Radio approvals ����������������������������������������������������������������������������������������13
12�1�1 Overview �������������������������������������������������������������������������������������������13 12�1�2 Europe ����������������������������������������������������������������������������������������������13 12�1�3 Notices FCC �������������������������������������������������������������������������������������13 12�1�4 Notices IC �����������������������������������������������������������������������������������������13 12�1�5 Administrative Regulations on Low Power Radio Waves Radiated Devices warning �������������������������������������������������������������������������������������������13
12�2 EC declaration of conformity ��������������������������������������������������������������������14
4
1 Preliminary note
This document is part of the device and contains information about the correct handling of the product�
This document is intended for specialists� These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device�
Read this document before use to familiarise yourself with operating conditions, installation and operation� Keep this document during the entire duration of use of the device�
1.1 Symbols used
Instructions Cross-reference
Important note Non-compliance can result in malfunction or interference� Information Supplementary note
2 Safety instructions
2.1 General
Observe the operating instructions� Non-observance of the instructions, operation which is not in accordance with use as prescribed below, wrong installation or incorrect handling can affect the safety of operators and machinery�
The installation and connection must comply with the applicable national and international standards� Responsibility lies with the person installing the device�
The device must only be installed, connected and put into operation by a qualified electrician as the safe function of the device and machinery is only guaranteed when installation is correctly carried out�
Disconnect the unit externally before handling it� In case of malfunction of the device or uncertainties please contact the
manufacturer� Tampering with the device can seriously affect the safety of operators and machinery� This is not permitted and leads to an exclusion of liability and warranty�
5
UK
2.2 Radio equipment
In general, radio equipment must not be used in the vicinity of petrol stations, fuel depots, chemical plants or blasting operations�
► Do not transport and store any flammable gases, liquids or explosive
substances near the unit�
2.3 Interference of electronic and medical devices
Operation can affect the function of electronic devices that are not correctly shielded�
► Disconnect the device in the vicinity of medical equipment� ► Contact the manufacturer of the corresponding device in case of any
interference�
3 Functions and features
In connection with the evaluation unit DTE10x the read/write head ANT410/ ANT411 enables non-contact reading and/or writing of the RFID transponders (ID tags) conforming to the system�
The data is converted into digitally coded values and provided to the evaluation unit�
4 Functions
4.1 Operating principle
The ID tags are operated passively, i�e� without battery� The energy required for operation is supplied by the read/write head�
The physical principle of the energy transfer is based on inductive coupling� The integrated antenna coil in the read/write head generates a magnetic field which partly penetrates the antenna coil of the ID tag� A voltage is generated by induction that supplies the data carrier with energy�
Loading...
+ 10 hidden pages