IFM Electronic AC2636, AC2634, AC2630, AC2625, AC2637 Installation Instructions Manual

Installation instructions

Field modules DP

AC2625/ AC2630 / AC2631 / AC2634

AC2636 / AC2637 / AC2638

UK

7390988/00 03/2013

1 Functions and features

The units have been designed for use as field modules in automation technology.
Non-observance of the instructions, operation which is not in accordance with use

as prescribed below, wrong installation or incorrect handling can affect the safety
of operators and machinery.

2 Symbols used

► Instruction

Important note
Non-compliance can result in malfunction or interference.

3 Installation

► Disconnect the system from power before installation.

► For installation choose a flat mounting surface.

The entire bottom of the module must lie flat on the mounting surface.

► Fix the module onto the mounting surface using 2 M3 screws and washers.

4 Electrical connection

The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.

► Disconnect the installation from power and connect the unit.

Recommended tightening torques:

► M12 Profibus connection: 0.6 Nm.
► M12 sockets: 0.6 Nm
► M8 connections: 0.4 Nm

4.1 Pin connection

Pin connection of the modules → see device label

2