IFM Electronic AC2482, AC2484 Operating Instructions Manual

Operating instructions

UK

AS-i CompactModule M8

AC2482
AC2484

UK

7390939/00 01/2013

1 Preliminary note

• An instruction is indicated by "►".
Example: ► Mount the unit as shown.

Important note
Non-compliance can result in malfunction or interference.

2 Functions and features

• Maximum number of modules per master: 62

• AS-Interface version 3.0, downward compatible

• AC2482: 2 inputs / 2 outputs / AS-i profile S-B.A.E / extended addressing
mode: yes

• AC2484: 4 inputs / AS-i profile S-0.A.E / extended addressing mode: yes

3 Installation

► Disconnect the system from power before installation.

► For installation choose a flat mounting surface.

The entire bottom of the module must lie flat on the mounting surface.

► Fix the module onto the mounting surface using M4 screws and washers.

4 Electrical connection

The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.

► Disconnect the installation from power and connect the unit.

To ensure the protection rating:

► Connect the plugs of the sensors to the M8 sockets.
► Tighten firmly, recommended tightening torque 0.3...0.5 Nm.
► Cover the sockets that are not in use with the enclosed protective caps.
► Tighten firmly, recommended tightening torque 0.3...0.5 Nm.

2