IFM Electronic AC2386, AC2388 Operating Instructions Manual

Operating instructions

AS-i illuminated pushbutton module

AC2386
AC2388

UK

80270506/02 02/2019

Contents

1 Preliminary note ...................................................................................................3

1.1 Symbols used ................................................................................................3

2 Safety instructions ...............................................................................................3

3 Functions and features ........................................................................................3

4 Installation............................................................................................................4

4.1 Fitting of the illuminated pushbuttons (AC2386) ............................................ 4

5 Electrical connection ............................................................................................4

5.1 Pin connection / data bits ..............................................................................5

5.2 Data bits.........................................................................................................5

6 Addressing ...........................................................................................................5

7 Operating and display elements ..........................................................................6

8 Operation .............................................................................................................7

9 Maintenance, repair and disposal ........................................................................7

2

1 Preliminary note

Technical data, approvals, accessories and further information at
www.ifm.com.

1.1 Symbols used

► Instructions
→ Cross-reference

Important note
Non-compliance may result in malfunction or interference.

Information
Supplementary note.

UK

2 Safety instructions

• Read this document before setting up the product and keep it during the entire
service life.

• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.

• Only use the product for its intended purpose (→ Functions and features).

• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.

• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.

• Protect units and cables against damage.

3 Functions and features

• maximum number of modules per master: 62

• AS-Interface version 3.0, backwards compatible

3