All product names, pictures, companies or other brands used on our pages are the
property of the respective rights owners�
3
RFID UHF reader
2 Safety instructions
●The device described is a subcomponent for integration into a system�
– The manufacturer is responsible for the safety of the system�
– The system manufacturer undertakes to perform a risk assessment
and to create a documentation in accordance with legal and normative
requirements to be provided to the operator and user of the system�
This documentation must contain all necessary information and safety
instructions for the operator, the user and, if applicable, for any service
personnel authorised by the manufacturer of the system�
●Read this document before setting up the product and keep it during the entire
service life�
●The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
●Use the product for its intended purpose (→ 3 Functions and features).
●If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
●The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
●Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
●Protect units and cables against damage�
3 Functions and features
The multiprotocol-capable RFID reader DTE830 / DTE930 reads active and
passive ID tags in different frequency ranges:
●Europe: 865 - 868 MHz
●USA: 902 - 928 MHz
●Australia: 916 - 927 MHz
On delivery the device can read and write ID tags according to the EPC Gen2
standard� Further protocols can be imported via software updates�
The device communicates with the ID tags via transmitting and receiving antennas
which are connected to the max� 4 antenna connections�
The device is designed for indoor use�
Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable for
use in domestic areas�
4
The device may only be used under the operating conditions specified in the
data sheet�
4 Radiated electromagnetic field strength
4.1 CE marking
The device complies with the requirements to CE�
RFID UHF reader
Brand name: ifm electronic DTE830 RFID UHF reader for Europe
The device is designed for operation in accordance with EN 302208� When
operating the device with connected antennas, observe the human exposure
regulations to EN 50364� Ensure a minimum distance of 23 cm between antenna
and people� During operation, cardiac pacemakers may be impaired� In case of
doubt, persons concerned should consult the manufacturer of the pacemaker or
the attending doctor�
The output power of the device can be reduced depending on the antenna cable
length and the antenna gain�
4.1.1 FCC labelling
The device complies with the requirements to FCC Part 15�
Brand name: ifm electronic DTE930 RFID UHF reader for US (FCC)
The device is designed for operation in accordance with FCC Part 15�
This device complies with part 15 of the FCC Rules� Operation is subject to
the following two conditions:
UK
●This device may not cause harmful interference�
●This device must accept any interference received including interference
that may cause undesired operation�
The device complies with the FCC limits for radiation exposure in a non-controlled
environment: Ensure a minimum distance of 23 cm between antenna and people�
In order to comply with the regulations of FCC Part 15 in the United States, the
system must be professionally installed� The operator and the installer have to
ensure that only systems certified in the United States are used�
5
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.