SET UP AND PLAY
INSTRUCTIONS
ALWAYS read, understand and follow all
warnings and instructions for your iFetch
Too before use. Keep for future reference.
IMPORTANT
SAFETY
INFORMATION
The user must read and understand
these Instructions Sheets and the
Warranty before using the iFetch.
Set up is the end user’s
responsibility and beyond the
control of iFetch, LLC. Therefore,
iFetch exclusively limits its Warranty
to the repair or replacement of
a defective product. Damage
to your home, your property, or
any person or pet is excluded.
• Your iFetch must be inspected
for signs of wear, damage
and fatigue before each use.
If damaged, do not use.
• This product is only intended
for recreational use to throw
tennis ball sized (diameter
approximately 2.6”) iFetch (or
similar) balls for your pets. Your
iFetch is NOT a child’s toy.
2
• Do not attempt to modify
your iFetch or any of the
system components.
Review all Warnings, Instructions,
and Warranty information carefully.
Failure to follow these warnings and
instructions will void the Warranty.
Call iFetch at (512) 219-3271
or visit goifetch.com, if you
have any questions regarding
the use of your iFetch.
PARTS LIST
A
Part Description
B
C
A One (1) iFetch Too
B One (1) Battery Charger
C Three (3) Balls (2.6” diameter)
NOTE:
Your iFetch Too will keep throwing balls for approximately 250
launches on a fully charged battery.
www.goifetch.com
3
SET UP
WARNING
To prevent SERIOUS INJURY:
• INSPECT for signs of wear,
corrosion, and fatigue
BEFORE each use. DO
NOT use if damaged.
• DO NOT operate when any
part of the machine is wet or
standing in water. DO NOT
use when raining. An electric
shock hazard may exist if
the unit is plugged in while
or after it has been exposed
to water. If there are damp
or wet conditions, ONLY use
the internal rechargeable
battery as a power source.
• DO NOT attempt to modify
your iFetch or any of the
system components
4
1. Check that the High–
Low slider is set to the
desired setting.
2. Plug in the battery charger
or press the button once
on your iFetch to check
the battery charge level.
3. Make sure your iFetch
is on a at, level surface
before each use.