IFB Appliances AW60-806 User Manual

Fully Automatic Washing Machine

Operation Manual

MODEL: AW60-806

FEATURES AND ACCESSORIES

FEATURES

Transparent window, unique outlook design: Adopting the vogue
transparent cover, let`s be clear at a glance in the course of washing.

Spraying water flow, washing more drastically: Adopting unique pulsator
can produce spraying water flow from the bottom, to break up the wrapped
clothing, so that the clothing can be washed more sufficiently and uniformly.

Dynamic soak, powerful washing: Adopting the model of dynamic soak, the
detergent will better be dissolved by water and fully infiltrated into the
clothes, especially wash the stubborn dirt off the clothes.

Complete function, easy and simple using: The fully automatic program,
delay washing, soak functions and fuzzy washing etc, ever and again satisfy
your family`s needs of washing clothes.

Slight vibration, low noise: The sun-and-planet gear technology is applied to
the mechanical transmission devices, reducing the mechanical noise.

Compact structure, pleasing appearance and durable: The mezzo­capacity the cabinet sprayed with plastic powder and the base made of
engineering plastic, it is resistible to corrosion and durable.

Memory back-up function:The washing machine has an in-built memory
function, thus ensuring that it will start from the same point from where it
has stopped , on resumption of power supply. This prevents you from
harassment of the power cut which provideyour family with a comfortable
washing environment.

Suggestion:If the voltage range exceed 230V 15%,we suggest add a
manostat to the washing machine.

Universal connector(1)

Accessories

Water inlet hose assembly(1 )

(Part of standard machine)

Base cover (1)
Self-tapping screw (1)

Fixing ring(1) is used for the
fixation in time of the installation
of the drain hose

Drain hose (1)

NAMES OF RESPECTIVE PARTS AND SIMPLE INSTALLATION

SIMPLE INSTALLATION

Names of respective parts

X
Q

B5

5

­80

9
G

±ê

×¼

ÖÇ

ÄÜ

¿ì

Ï´

¸ö

ÐÔ

ÏË

ϸ

ͯ

ÒÂ

´ó

Îï

Ñò

2
С

ʱ
1
С

ʱ

½Ú

ÄÜ

3
0

·Ö
ÖÓ

½Ú

Ë®

Í°

·ç

Ê£

¸É

Óà

¾²

ʱ
¼ä

Òô

£¨

·Ö
£©

Ë®

ȯ
ÊÕ

½þ

ÅÝ

Ô¤
Ô¼

£¨
С

Ï´µÓ

ʱ
£©

Éè

ÖÃ

Ưϴ

ÍÑ

Ë®

1. Top lid 2.Operation panel 3.Adjustable leg 4.Cabinet

5. Drain hose 6.Top frame 7.Pulsator 8.Lint filter 9.Inner tub

ë

¹¦

ÄÜ

5

.

Ñ¡

5k

Ôñ

g

9

8

7

3. Use gradienter to check whether the washine machine is place flat.

4. After the adjustment the fixing pole should be screwed back and tight.

Notices:

If the washing machine is not placed flat (the inclination angle is over 2 ), it may cause great

o

vibration or automatic check and rectification or other abnormal circumstances will often take place in

the course of spinning.

All foam packing including the fixing frame on the base foam in the step 2.

Base foam Fixing frame

Loose

Fixing pole

Tight

Adjustable foot

Screw in

Screw out

Bukly objects

Step 4:

Installation of the water inlet hose

1. Check the tap mouth.If it is not even,it can be filed even.

2.Loosen the locking ring slightly , Screw the four screws into universal

connector at the same distance.

3. Put the tap deeply into the universal connector then screw in the screws.

4. Screw tight the locking ring clockwise at the most.

5. Pull the skirt of one end of the water inlet hose downwards, and then plug in

the universal connector. A sound of KA-TA means proper connection.

Simple installation

Step 1:

The washing machine should be placed inside the room with a flat floor, which is
convenient for water supply and drain, has low moisture and no direct sunshine, and
does not freeze in winter.

Step 2:

All foam packing (including the fixing frame on the base foam) should be taken off,
otherwise the washing machine will not work.

Step 3:

Please adjust the washing machine even according to the instructions below to make
the washing machine run steadily in low noise.

1.Loose the fixing pole on the adjusting foot, screw in or screw out the adjusting foot
to make the four feet placed even on the floor.

2. When the floor is slanting or uneven, it is not easy to make even only by the
adjusting foot. Then the rubber band can be added to the un-flat place.

Tap

If the calibre of the tap
is big, the connecting
ring can be taken off.

Skirt

File

Connecting ring

Locking ring

SIMPLE INSTALLATION

Notices:

After installation, do not start the washing machine in haste. First open the tap to let the

water press into the water inlet hose to check whether there is any leakage in the connectors

on the both ends. When the pressure is too high, please shut the tap a little to avoid water

leakage.

The method of installation for the double water inlet hose is same.

Step 5:

Installation of the drain hose

1. Nip the fixing ring with hand to make it loose

and engaged on the drain hose and put the

drain hose into the leading skirt of drain hose in

the bottom of the washing machine to the end

at the most (soak the head of the drain hose in

warm water, it will make the engagement easy),

and loose the fixing ring to let it clasp the drain

hose.

2. It had better put the outlet of the drain hose into the nearby drainage permanently, which

can save the trouble that the drain hose has to be connected each time before use. If the

drainage is far from the washing machine, it can be solved by connection of the drain hoses

head with end to extend.

Inner hose

Leading ring

Cabinet

Fixing ring

Drain hose

SIMPLE INSTALLATION AND SIMPLE OPERATION

Step 6:

Power source and grounding

The washing machine employs alternative current with the rated voltage and frequency. When

the voltage fluctuates between 10% of rated voltage, the washing machine can work normally. A

special power socket for the washing machine had better be set beside the washing machine for

convenience and safety. The method of connection of the socket is as the figure below:

Notices:

The socket and the grounding wire must be installed

by an electrician to prevent incorrect installation or use of

the socket, and to guarantee the safety of use of

electricity.

The power wire of the washing machine employs Y

connection and the replacement of the power wire

should be carried out by professionals.

No connection of the grounding wire with the neutral

wire, otherwise the cabinet will be charged, which is

likely to cause the danger of electric shock.

Installation of the base cover

Step 7:

1. Slant the washing machine with angle of 45 in the direction of

the arrows showed in the figure, put the side with the clasper to

the washing machine and the other side to the ground, insert base

cover along the direction of the upper slot of the base from the

back side of the washing machine.

2. Put the base cover straight to the point and then press the base

cover upward till there is a sound of "Gaba" and then screw in

a self-tapping screw(without the self-tapping screw for plastic

cabinet).

o

Rated voltage ~

Grounding wire

Slot

Base cover

Hole for Self-tapping screw

Simple operation

Preparations before using:

1. Hang the drain hose up, the high is about 1 m.

2. Connect the water inlet hose and open the tap.

3. Put the power plug into the socket.

4. Take out the coins and other sundries and shake off the mud and sand on the clothes.

5. Determine water level. Press "Water level" button to select the water level.

6. Press "Power" switch button.

7. Press "Start/Pause" button. The washing machine will go into operation by the automatic program of standard.

Notices:

If you want to set other programs, please see and read "Full automatic program" and "Self-program".
According to your needs, select corresponding programs for your service.

CONTROL PANEL DESIGN

CONTROL PANEL DESIGN

FULLY AUTOMATIC PROGRAM

Press the button,you can choose
air-dry time freely.
You also can select tub-clean.

EF

Press the button,youcan
select single EF programe
or combine EF programe.

Water level

Press water level button, the user can set

water level freely..

Wool programe can select 10-16 level

Rapid programe can select 1-10 level.
Others can select 1-16level freely.

Preset

Press the button to preset delay time.
Less than 24 hours,each press of the
button,the delay time is added by an
hour.For more than 24 hours,each
press of the button,the delay time
is added by 6 hours.After 48 hours,
the preset indicator comes back to
original status.If the button is kept
pressed,the delay time will
automatically change.

k

c

o

L

d

l

i

h

C

Please read "Additional explanation".

Selection of function

Press the button to select
"WASH "RINSE" "SPIN

"+ + ",

"SOAK "WASH "RINSE "SPIN

"+ "+ "+ ",

"WASH "WASH "RINSE

", "+ ",

"RINSE "SPIN "SPIN

"+ ", ".

Program

By washing requirement you may
optional select the programs of
"NORMAL "FUZZY
"RAPID "LAST TIME
"DELICATE "CHILD
"BULKY "WOOL

(light)/ "(flash),

(light)/ "(flash)

"(light)/ (flash)

"(light)/ "(flash)

AW60-806

Fully Automatic Washer

6.0

Light/Flash

Rapid

Bulky

Program

Fuzzy

Last time

Child

Wool

POWER

Normal

Delicate

Power

On & off power

Automatic power off

Start/Pause

After program
selection, press the
button to start.
Press the button to
pause in the course of
operation, press the
button again the
program continues till

the program is finished.

AIR-DRY

2 Hr.

1 Hr.

!

r

30 Min

Tub dry

EF

In order to protect controller, the interval of switching on and off power
should be more than 30 seconds.

Energy Saving

Water Saving

Quiet Operation

Rinse Hold

WATER LEVEL

PRESET

CHILD LOCK

REMAINING TIME

PRESET
(HOURS)

FUNCTION

Soak

Wash

Rinse

Spin

START

PAUSE

If drawing is changed, no inform any more.