USER MANUAL
ZEPHYR SX
CONTENTS
Getting familiar with your machine ……………………………………………………….
4
• Technical specifications ………………………………………………………………
5
• Conformity with the standards and Test data ………………………………………...
5
Safety information and Recommendations………………………................................ 5
• Recycling .......………………………............................
....................................................
5
• Safety information ……………………………………………………………………….
5
• Recommendations …...………………………………………………………………….
6
• Items not suitable for dishwashing …………………………………………………….
7
Installing the machine ………………………………………………………………………. 7
• Positioning the machine ………………………………………………………………...
7
• Water connections …………………............................
....................................................
7
• Water inlet hose ….………………………………………………………………………
8
• Water outlet hose …..………………............................
....................................................
8
• Electrical connection……………………………………………………………………..
9
• Fitting the machine undercounter ……………………………………………………...
9
• Prior to using the machine ……………………………………………………………...
11
Preparing the machine for use ……………………………………………………………. 11
• The importance of water decalcification ………………………………………………
11
• Filling with salt ……………………………………………………………………………
11
• Testing strip……………………………………………………………………………….
12
• Adjusting salt consumption……………………………………………………………...
12
• Detergent usage ……………………........................................................................
14
• Filling the detergent compartment……………………………………………………...
14
• Combined detergent …………………………………………………………………….
14
• Filling with rinse aid and making the setting…………………………………………..
15
1
Loading your dishwasher .…………………………………………………………………….. 1
6
• Dish rack ……………………………………………………………………………………
16
• Alternative basket loads …………………………………………………............................
17
• Standard loading and Test data …………………………………………………………...
18
Programme descriptions .……………………………………………………………………... 19
• Programme items …………………………………………………………………………... 19
Switching on the machine and selecting a programme……………............................... 20
• Switching on the machine…………………………………………………………………..
20
• Programme follow-up………………………………………………………………………..
20
• Changing a programme ……………………………………………………………………
20
• Changing a programme with resetting ……………………………………………………
21
• Switching the machine off ….………………………………………………………………
21
Maintenance and Cleaning ............................................................................................... 22
• Filters ..……………………………………………………………………………………….
22
• Spray arms …………………………………………………………………………………..
23
• Hose filter …………………………………………………………………………………….
23
Failure codes and what to do in case of failure ………………………………………….
24
Practical and useful information……………………………………………………………... 26
2
1.
Worktop
7.
Rating plate
2.
Upper basket with racks
8.
Control Panel
3.
Upper spray arm
9.
Detergent and rinse-aid dispenser
4.
Lower basket
10.
Cutlery basket
5.
Lower spray arm
11.
Salt dispenser
6.
Filters
12.
Upper basket track latch
3
1
2
3
5
6
7
8
9
10
11
12
4
1.) Power On/Off Button
When the Power On/Off button is pressed, the lamp on the
Start/Pause button starts lighting.
2.) Door Handle
The door handle is used to open/close the door of your
machine.
3.) Start/Pause Button
Once you press the Start/Pause button, the programme you
selected with the programme selector button will start running
and the status indicator lamp “wash/Dry” will light up.
In the stop condition while wash led is On, Start/Pause led will blink.
4.) Programme selector knob
With the programme selector knob, you can select a suitable programme
for your dishes.
5.) Wash-Dry / End-of-cycle indicator
You can monitor the programme status with the help of ‘wash/Dry’ and
‘end’ indicators.
• Wash/Dry
• End
4
GETTING FAMILIAR WITH YOUR MACHINE
1
2
3
4
5
Technical specifications
Capacity …………………………
Height
……………………
………
Height (without worktop) ……….
Width ……………………………..
Depth …………………………….
Net Weight ……………………...
Electricity input ……………........
Total Power ……………………..
Heat
ing Power …………………..
Pump Power …………………….
Drain Pump Power ……………..
Water supply pressure...............
Current …………………………..
12 place s
ettings
845 mm
815 mm
596 mm
598 mm
46 kg
220-240 V, 50 Hz
2200 W
2000 W
100 W
30 W
0.03 MPa (0,3 bar) - 1 MPa (10 bar)
10 A
• Producer company has its
right to amend design and technical specifications reserved.
• The machine's service life is 10 years (the duration required to keep spare parts for the machine
to fulfil its usage functions).
Conformity with the standards and Test data / EC Declaration of Conformity
All stages related to the machine are executed in accordance with the safety rules provided in all
relevant directives of the European Community.
2004/108/EC, 2006/95/EC, IEC 436/DIN 44990, EN 50242
Recycling
• Certain components and the packaging of your machine have been produced from recyclable
materials.
• Plastic parts are marked with international abbreviations:
(>PE< , >PS< , >POM<, >PP<, ….)
• Cardboard parts have been produced from recycled paper and they should be disposed of into
waste paper collection containers for recycling.
• Such materials are not suitable for being disposed of into garbage bins. They should be delivered
to recycling centres instead.
• Contact relevant centres in order to obtain information on methods and points of disposal.
Safety Information
When you take delivery of your machine
• Check for any damage to your machine or to its packaging.
Never start a machine damaged in any way, make sure to contact an authorised service.
• Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.
The points to pay attention during machine installation
• Choose a suitable, safe and level place to install your machine.
• Carry out the installation and connection of your machine by following the instructions.
• This machine should be installed and repaired by an authorised service only.
SAFETY INFORMATION AND RECOMMENDATIONS
5
• Only original spare parts should be used with the machine.
• Before installing, be
sure that the machine is unplugged.
• Check whether the indoor electrical fuse system is connected according to the regulations.
• All electrical connections must match the values indicated on the rating plate.
• Pay special attention and be sure that the machine does not stand on the electricity supply cable.
• Never use an extension cord or a multiple socket for making a connection. The plug should be
comfortably accessible after the machine has been installed.
• After installing the machine to a suitable place, run it unloaded for the first time.
In daily use
• This machine is for household use, do not use it for any other purpose. Commercial usage of the
dishwasher will void the guarantee.
• Do not load your machine above its capacity; wash in the machine only those items which are
suitable for dishwashing.
• Do not get up, sit or place a load on the open door of the dishwasher, it may fall over.
• Never put into the detergent and rinse aid dispensers of your machine anything other than those
detergents and rinse aids which are produced specifically for dishwashers. Our company will not
be responsible for any damage that might occur in your machine otherwise.
• The water in the machine's washing section is no drinking water, do not drink it.
• Due to danger of explosion, do not put into the machine’s washing section any chemical
dissolving agents such as solvents.
• Check whether plastic items are heat-resistant before washing them in the machine.
• Do not put into your machine those items which are not suitable for dishwashing. Also, do not fill
any basket above its capacity. Our company will not be responsible for any scratch or rust to
form on the inner frame of your machine due to basket movements otherwise.
• Especially because hot water may flow out, the machine door should not be opened under any
circumstances while the machine is in operation. In any case, a safety devices ensures that the
machine stops if the door is opened.
• Do not leave your dishwasher’s door open. Failure to do so may lead to accidents.
• Place knives and other sharp-ended objects in the cutlery basket in blade-down position.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety
For your children’s safety
• After removing the machine’s packaging, make sure that the packaging material is out of reach of
children.
• Do not allow children to play with or start the machine.
• Keep your children away from detergents and rinse aids.
• Keep children away from the machine while it is open because there may still be residues of
cleaning substances inside the machine.
• Be sure that your old machine does not pose any threat to your children. Children are known to
have gotten themselves locked in old machines. To forestall such a situation, break your
machine's door lock and tear off the electrical cables.
In case of malfunctioning
• Any malfunction in the machine should be repaired definitely by qualified persons. Any repair
work performed by anyone other than the authorised service personnel will cause your machine
to be left outside the scope of warranty.
• Prior to any repair work on the machine, be sure that the machine is cut off from the mains.
Switch off the fuse or unplug the machine. Do not pull by the cable when unplugging. Make sure
to turn off the water tap.
6
Recommendations
• For energy and water sav
ing, remove coarse residues on your dishes before placing the dishes
into the machine. Start your machine after having fully loaded it
• Use the pre-wash programme only whenever necessary.
• Place such hollow items as bowls, glasses and pots into the machine in such a way that they will
face down.
• You are recommended not to load into your machine any dishes different or more than indicated.
Items not suitable for dishwashing:
• Cigarette ashes, candle leftovers, polish, chemical substances, iron-alloy materials;
• Forks, spoons and knives with wooden or bone, or ivory or nacre-coated handles; glued items,
paint, items soiled with abrasive, acidic or base chemicals
• Plastic items that are not heat-resistant, copper or tin-coated containers;
• Aluminium and silver objects (they may discolour, become dull)
• Certain delicate glass types, porcelains with ornamental printed patterns as they fade even after
the first wash; certain crystal items as they lose their transparency over time, adhered cutlery that
is not heat-resistant, lead crystal glasses, cutting boards, items manufactured with synthetic fibre;
• Absorbent items as sponges or kitchen rags are not suitable for dishwashing.
Warning: Take care to buy dishwasher-proof sets in your future purchases.
Positioning the machine
When determining the place to put your machine on, take care to choose a place where you can
easily load and unload your dishes.
Do not put your machine in any location where there is the probability for the room temperature to fall
below 0°C.
Before positioning, take the machine out of its packaging by following the warnings located on the
package.
Position the machine close to a water tap or drain. You need to site your machine, taking into
consideration that its connections will not be altered once they are made.
Do not grip the machine by its door or panel in order to move it.
Take care to leave a certain clearance from all sides of the machine so that you can comfortably move
it back and forth during cleaning.
Make sure that the water inlet and outlet hoses do not get squeezed while positioning the machine.
Also, make sure that the machine does not stand on the electrical cable.
Adjust the machine’s adjustable feet so that it can stand level and balanced. Proper positioning of the
machine ensures problem-free opening and closing of its door.
If the door of you machine does not close properly, check if the machine is stable on the floor it stands;
if not, adjust the adjustable feet and ensure its stable position.
INSTALLING THE MACHINE
7
Water connection
Be sure that the indoor
plumbing is suitable for installing a dishwasher. Also, we recommend that you
fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine
because of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the
mains water supply or the indoor plumbing, and to forestall such complaints as yellowing and
formation of deposits after washing.
Water inlet hose
Do not use the water inlet hose of your old machine, if any. Use the new
water inlet hose supplied with your machine instead. If you are going to
connect a new or long-unused water inlet hose to your machine, run water
through it for a while before making the connection. Connect the water inlet
hose directly to the water inlet tap. The pressure supplied by the tap should
be at a minimum of 0.03 Mpa and and at a maximum of 1 Mpa. If the water
pressure is above 1 Mpa, a pressure-relief valve should be fitted inbetween.
After the connections are made, the tap should be turned on fully and
checked for water tightness.
For the safety of your machine, make sure to always turn off the water inlet
tap after each wash programme is finished.
NOTE: Aquastop water spout is used in some models. In case of
using Aquastop, a dangerous tension exists. Do not cut
Aquastop water spout. Do not let it get folded or twisted.
Water outlet hose
The water drain hose can be connected either directly to the water
drain hole or to the sink outlet spigot. Using a special bent pipe (if
available), the water can be drained directly into the sink via hooking
the bent pipe over the edge of the sink.
This connection should be at a minimum of 50 cm and and at a
maximum of 110 cm from the floor plane.
Warning: When a drain hose longer than 4 m is used, the dishes
might remain dirty. In that case, our company will not accept
responsibility.
8
Electrical connection
The
earthed plug of your machine should be connected to an earthed outlet supplied by suitable
voltage and current. If there is no earthing installation, have a competent electrician carry out an
earthing installation. In case of usage without earthing installed, our company will not be responsible
for any loss of usage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is set according to 220-240 V. If the mains voltage in your location is 110 V, connect a
transformer of 110/220 V and 3000 W inbetween. The machine should not be plugged in during
positioning.
At low voltage, Wash efficiency of your machine decreases.
Always use the coated plug supplied with your machine.
The machine’s electrical cable should be replaced by an authorised service or an authorised
electrician only. Failure to do so may lead to accidents.
For safety purposes, always make sure to disconnect the plug when a wash programme is finished.
In order not to cause an electric shock, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the plug. Never pull the
cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have sufficient space under your
countertop and whether the wiring-plumbing is suitable to do so.1 If you decide that the
space under
the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration. 2
Warning:The stand part whi
ch we will settle our machine under it by removing its worktop has
to be stable in such a way not to allow balance disorder.
9
To remove the worktop, r
emove the screws that hold the worktop which are located at the rear of the
machine; then push the front panel 1 cm from the front side towards the rear and lift it.
Adjust the machine feet according to the slope of the floor.3 Fit your machine by pus
hing it
undercounter without letting the hoses get crushed or bent.4
Warning: After removal of
worktop, the machine should be placed in such a closed place of which
dimensions are shown at fig.
10
Prior to using the machine for the first time
• Check whether the electricity and supply water specifications match the values indicated by the
installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Set the water softener.
• Add 2 kg salt into the salt compartment and fill with water up to a level at which it will almost
overflow.
• Fill the rinse aid compartment.
The importance of water decalcification
For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white
lime residues will remain on the dishes and the interior equipment. This will negatively affect your
machine’s washing, drying and shining performance. When water flows through the softener system,
the ions forming the hardness are removed from the water and the water reaches the softness
required to obtain the best washing result. Depending on the level of hardness of the inflowing water,
these ions that harden the water accumulate rapidly inside the softener system. Therefore, the
softener system has to be refreshed so that it operates with the same performance also during the
next wash. For this purpose, dishwasher salt is used.
Filling with salt
Use softener salt specifically produced for use in dishwashers. To
put softener salt, first remove the
lower basket and then open the salt
compartment cap by turning it
counter clockwise.1 2 At first fill the
compartment with 2kg salt and
water 3 at overflowing level If
available,using the funnel 4 provided
will make filling easier; refit the cap
and close it.
After every 20th-30th wash, add salt
into your machine until it fills up
(approx. 1.5 kg)
Fill the salt compartment with
water at first use only.
We recommend that you use smallgrained or powder softener salt.
Do not put table salt into your
machine. Otherwise, the function of
the softener compartment may
decrease over time. When you start
your dishwasher, the salt
compartment gets filled with water. Therefore, put the softener salt prior to starting your machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are not
going to wash any dishes immediately after putting salt, then run a short washing program with an
empty machine in order to avoid any damage ( to prevent corrosion ) to your machine due to the salt
overflow while filling in the salt container.
PREPARING THE MACHINE FOR USE
11
In order to understand whether or not the amount of softener salt in your machine is sufficient, check
the transparent section on the salt compartment cap. There is sufficient salt if the transparent section
is green. Salt has to be added if the transparent section is not green.
Testing strip
The washing effectiveness of your machine depends on the softness of the tap water. For this reason,
your machine is equipped with a system that reduces the hardness in mains water supply. The
washing effectiveness will increase when the system is correctly set. To find out the water hardness
level of water in your area, contact your local water board or determine water hardness level by using
the test strip(if available).
Adjusting salt consumption
Table of Water Hardness Level Settings
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well
water; you are recommended to use filter and water refinement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
Open the
testing
strip.
Run
water
through
your tap
for 1
min.
Keep the
testing
strip in
water for 1
sec.
Shake the
testing strip
after taking it
out of water.
Wait for
1 min.
Make your machine’s water hardness
setting according to the result obtained
through the testing strip.
12
Adjusting salt consumption
Adjust the
water softener according to how hard your tap water is.
Move the programme selector knob to the 0 (Reset) position while your machine
is not in operation.1
After resetting your machine, press t
he Start/Pause button and keep it pressed
down.2
Meanwhile, energise the machine by pressing the Power On/Off button. 4
Keep Start/Pause keys press until program monitor lights are on and off. 2
After the lamps “Wash/Dry/End” have flashed 3 , release the Start/Pause
button. 2
Your machine displays the latest ente
red water hardness setting.
You can adjust the levels by pressing the Start/Pause button 2 according to
Table of Water Hardness Level Sett
ings.
After adjusting the water hardness level , press on/off button to save the
settings in memory. 4
13
1
2
3
4
Detergent usage
Use a det
ergent specifically designed for use in domestic dishwashers.
You can find powder,gel,and tablet detergents in the market that have been designed for
household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your
detergents in cool, dry places out of reach of your children.
Do not fill detergent into the detergent compartment more than required; otherwise it may cause
scratches on your glasses as well as lead to a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact detergent
manufacturers directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown in
the image. 1 Detergent pod has level lines inside. It is possible
to measure the right detergent amount using these lines.
Detergent pod can take totally 40 cm3 detergent.
Open the dishwasher detergent and pour into the larger
compartment a 25 cm3 if your dishes are
heavily soiled or 15
cm3 if they are less
soiled.2 If your
dishes have been
kept dirty for a very
long time, if there are dried food wastes on them, and if
you have overly loaded the dishwasher, pour a 5cm3
detergent into the pr
e-wash compartment and start
your machine.
You may have to add more detergent into your
machine, depending on the degree of soil and on the
water hardness level in your area.
Combined detergents
Detergent manufacturers also manufacture combined detergents that are called 2 in 1 – 3 in
1- 5 in 1...
The 2 in1 detergents contain detergent+ salt or rinse aid . While using the 2 in 1 detergents,
it should be observed which functions the tablet consists of.
The other tablet detergents also have detergent+rinse aid +salt+various extra functions.
Generally, combined detergents produce sufficient results under certain usage conditions only.
Such detergents contain rinse aid and/or salt in preset amounts.
Points to consider when using this type of products:
• Always make sure to check the specifications of the product you will use or whether or not
it is a combined product.
• Check if the detergent used is appropriate for the hardness of mains water that machine is
appertaining to.
• Observe the instructions on packagings when using such products.
14
• If such detergents are in the form of tablets, never put them into the interior section or the
cutlery basket of the d
ishwasher. Always put the tablets into the detergent compartment in
the detergent dispenser.
• They produce good results for certain types of usage only. If you are using this type of
detergents, you need to contact the manufacturers and find out about the suitable
conditions of use.
• When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
• Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergents.
Recommended usage: If you want to obtain better results while using combined detergents,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid
setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary
depending on the temperature and time. Therefore, it is not recommended to use
such detergents in short programs. It is more suitable to use powder detergents in such
programs.
Warning: Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
When you give up using combined detergents
• Fill the salt and rinse aid compartments.
• Adjust the water hardness setting to the highest position and run an empty-wash.
• Adjust the water hardness level.
• Make the suitable rinse aid setting.
Filling with rinse aid and making the setting.
Rinse aid is used to prevent the stay of white water drops, lime
stains, white film strip-shaped stains that may form on the dishes,
as well as to increase the drying performance. Contrary to the
popular beliefs, it is used not only
for obtaining shinier dishes but also
for obtaining sufficiently dried
dishes. For this reason, care should
be taken that there is adequate
amount of rinse aid in the rinse aid
compartment and only polishing
material produced for use at dishwashers should be used.
To put rinse aid, remove the rinse
aid compartment cap by turning it.1
Fill the rinse aid compartment with rinse aid until the rinse aid level
indicator becomes dark;2 refit the cap and close it by turning it in a
way that the nails will c
orrespond to one another. By checking the
rinse aid level indicator on the detergent dispenser, you can
understand whether or not your machine needs rinse aid. A dark
indicator b means that there is rin
se aid in the compartment, while
a light indicator a shows that you need to
fill the compartment with
rinse aid.
15
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse
aid is the position 3.
You
need to increase the degree of the adjuster if water stains form on your dishes after
a wash, whereas you need to decrease the degree if a blue stain is left when wiped by
hand.3
Warning: Use only those rin
se aid materials which are allowed for use in the machine. As rinse
aid residues left as a result of overflowing will create extremely high amounts of foam and thus
reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.
If you properly place your dishes into the machine, you will be using it in the best way in terms
of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can load into
the lower basket such round and deep items as pots with long handles, pot lids, plates, salad
plates, cutlery sets.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and
glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack
or glass supporter wire and not against other items. Do not lean long glasses against one
another or they cannot remain steady and may receive damage.
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.
You can place spoons among the other cutlery sets in order to prevent them from sticking to
one another. You are recommended to use the cutlery grid in order to obtain the best result.
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as
serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper and
lower spray arms from spinning.
Dish rack
There are dish racks on the upper basket of your
machine. a b You can use these dish r
acks in open
or closed position. When they are in open position a
you can place your cups on
them; and when in
closed position b you can place long glass
es on the
basket. Also, you can use these racks by placing
long forks, knives and spoons on them laterally.
LOADING YOUR DIS
HWASHER
16
Alternative basket loads
Lower Basket
Top basket
Faulty loads
17
Standard loading and test data
Capacity:
Upper and lower baskets: 12 place settings. The upper basket should be adjusted to high position.
Cups should be placed on to the dish rack pins.
Detergent / Rinse aid
5+25 cm
3
, in accordance with EN50242-DIN 44990 IEC 436 (international norms) / Rinse aid dosage
adjustment: 4
Programme test
Economic 50°C, in accordance with EN 50242 (international norms)
18
Programme items
The values declared above are the values obtained under laboratory conditions according to
relevant standards. These values can change depending on conditions of product’s use and
environment (network tension, water pressure, water input temperature and environment
temperature).
PROGRAMME
DESCRIPTIONS
Programme items
Reference
Super 50 min.
**
Hygiene
A
A+B
A+B A+B
A+B
30 150 50 110 120
0.68 1,05 1,37 1,55 1.50
12,4 15,7 12,7 17,2 16.5
Programme No
Programme names
Temperatures
Type of food waste
Detergent amount
A: 25 cm
3
/ 15 cm3
B: 5 cm
3
Level of soil
Warning:Short programs do not include a drying step.
Programme
duration
(min.)
Electricity
consumption
(kW hours)
Quick 30 min.
Economic
Intensive
70°C
65°C
65°C
50°C
40°C
small
coffee, milk,
tea, cold meats,
vegetables,
not kept for long
coffee, milk, tea,
cold meats,
vegetables,
not kept for long
soups, sauces,
pasta,
eggs, pilaf, potato
and oven dishes,
fried foods
soups, sauces,
pasta,
eggs, pilaf, potato
and oven dishes,
fried foods
Dishes with dense
dirt waiting for a
long time or
requiring
hygienic washing.
40°C Wash
50°C Wash
65°C Wash
65°C Wash
70°C Wash
Cold Rinse
Cold Rinse Cold Rinse
Cold Rinse
Hot rinse
Hot rinse
Hot rinse
Hot rinse
Dry Dry Dry
End
End
End
End
End
Prewash
Prewash
Prewash
Cold Rinse
Hot rinse
*** Super 50 min. with this programme, you can wash your dishes in “A” washing performance
19
1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selection
button.
3. Start the program pressing
the Power Start/Pause key.
Switching on the machine
Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
Changing a programme
If you would like to change programs while a washing program is continuing.
SWITCHING ON THE MACHINE AND
SELECTING A PROGRAMME
20
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
The lamp on Program Start/Pause key
goes off once the Program starts and
the washing/Drying lamp is highlighted.
As long as Washing and Drying goes
on the Washing/Drying lamp goes on
to light .When drying is active machine
stays silent about 40-50 minutes
Once the program is over, the
lamp Finished is illuminated.
Do not open the cover before
the lamp Finished is on.
Press once the Power
Start/Pause key.
After the program stops, select
your desired program via the
Program selection button.
Start the program you have
newly selected by pressing
again the Start/Pause key.
The new program started
will resume the course of
the old program.
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed
Switching the machine off
Note: You can slightly open the door in order for the machine to perform a faster dry operation after
the wash programme is finished.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the
program in case the door is shut or the power is back.
21
Press once the Power
Start/Pause key.
Turn the Program
Selection Button to Reset
Press once the Power
Start/Pause key.
The machine will discharge the
water in it for nearly 30 sec.
The program will have been
cancelled once the drying lamp
goes off and the lampFinshed is
on.
When the lamp “End” lights up,
switch your machine off by using
the Power On/Off button.
Pull the plug out of the outlet.
Turn of the water tap.
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
Cleaning the machine in reg
ular intervals prolongs the machine’s service life.
Oil and lime may accumulate in the machine’s washing section. In case of such accumulation;
-Fill the detergent compartment without loading any dishes into the machine, select a programme that
runs at high temperature, and start the machine. In case of insufficiency, use special cleansing
material available in the market. (Cleansing material produced special to machines by detergent
producers.)
Cleaning the seals in the machine door,
-To clean any accumulated residues in the door seals, wipe the seals regularly by using a dampened
cloth.
Cleaning machine,
Clean the filters and spray arms at least once a month.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material and a
dampened cloth.
Filters
Check if any food wastes have remained on the coarse and fine
filters.
If any food wastes are left, remove the filters and clean them
thoroughly under the water tap.
a. Micro Filter
b. Coarse Filter
c. Metal/Plastic Filter
To remove and clean the filter combination, turn it counter clockwise and
take it out by lifting upwards.1
Pull and remove the metal/plastic filter. 3 Then pull the coarse filte
r
out of the micro filter.2 Rinse it with lots of wate
r under the tap. Refit
the metal/plastic filter. Insert the
coarse filter into the micro filter in a
way that the marks will correspond to
one another. Attach micro filter into the
metal/plastic filter and turn to the
direction of arrow and it is locked
when the arrow on micro filter can be
seen from across. 4
• Never use your dishwasher
without any filter.
• Incorrect fitting of the filter will
reduce the washing effectiveness.
• Clean filters are very important in terms of the proper running of the
machine.
MAINTENANCE AND CLEANING
22
Spray arms
Check whether or not the holes for the upper and
lower spray arms are clogged. If there is any
clogging, remove the spray arms and clean them
under water.
You can remove the lower spray arm by pulling it
upwards, while the upper spray arm nut can be
removed by turning the nut to the left.
Be sure that the nut is perfectly tightened when
refitting the upper spray arm.
Hose filter
Water is prevented by the inlet hose filter so as to avoid any damage to your machine because of any
contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water
supply or the indoor plumbing, and to forestall such complaints as yellowing and formation of deposits
after washing. Check the filter and the hose from time to time and clean them if necessary. To clean
the filter, first turn off your tap and then remove the hose. After removing the filter from the hose, clean
it under the tap. Insert the cleaned filter back into its place inside the hose. Refit the hose.
23
If one of program monitor l
ights is on and start/Pause light is on and off,
Your machine’s door is open, shut the door.
If the programme won’t start
• Check if the plug is connected.
• Check your indoor fuses.
• Be sure that the water inlet tap is turned on.
• Be sure that you have closed the machine door.
• Be sure that you switched off the machine by pressing the Power On / Off button.
• Be sure that the water inlet filter and the machine filters are not clogged.
If the lamps “Wash/Dry” and “End” keep flashing
• Water overflow alarm is active
• Turn off your tap and contact an authorised service.
If the control lamps won’t go out after a wash operation
The Power On/Off button is released yet.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
ERROR CODE
Wash /Dry End Start/Pause
ERROR
DESCRIPTION
CONTROL
Inadequate water
supply
• Make sur
e the water input tap is totally open and that
there is no water cut.
• Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
• Restart your machine, contact the service if the error
resumes.
Error of continuous
water inp
ut
• Close the tap.
• Contact the service.
The waste water in the
machine
cannot be
discharged.
• Water discharge hose is clogged.
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
Intended water
temperature co
uld not
be reached faulty
heater and heater
sensor
Contact the service.
Alarm is active against
water ove
rflow
• Power off your machine and close the tap.
• Contact the service.
Faulty electronic card
Contact the
service.
FAILURE CODES AND
WHAT TO DO IN CASE OF
FAILURE
24
If water is left inside the
machine at the end of the programme
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The programme is not finished yet.
If the machine stops during a wash operation
• Power failure.
• Water inlet failure.
• Program can be on standby mode.
If shaking and hitting noises are heard during a wash operation
• Dishes placed incorrectly.
• Spray arm hitting the dishes.
If there are partial food wastes left on the dishes
• Dishes placed incorrectly into the machine, sprayed water did not reach related places.
• Basket overly loaded.
• Dishes leaning against one another.
• Very small amount of detergent added.
• An unsuitable, rather weak wash programme selected.
• Spray arm clogged with food wastes.
• Filters clogged.
• Filters incorrectly fitted.
• Water drain pump clogged.
If there are whitish stains on the dishes
• A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
• No special salt is being used despite the high degree of water hardness.
• Water softener system setting is at a very low level.
• Salt compartment cap not closed well.
If the dishes won't dry up
• A programme without a dry operation selected.
• Rinse aid dosage set too low
• Dishes unloaded too fast.
If there are rust stains on the dishes
• Stainless-steel quality of the dishes washed is insufficient.
• High rate of salt in the wash water.
• Salt compartment cap not closed well.
• Too much salt spilt into the sides and into the machine while filling it with salt.
• Unhealthy mains grounding.
Call an authorised service if the problem still persists after the controls or in case of any
malfunction not described above.
25
1. Whenever you will not be o
perating your machine
• Unplug the machine and then turn the water off.
• Leave the door slightly ajar in order to prevent the formation of unpleasant smells.
• Keep the machine interior clean.
2. Eliminating water droplets
• Wash the dishes with the intensive programme.
• Take all of the metal containers in the machine out.
• Do not add detergent.
3. If you properly place your dishes into the machine, you will be using it in the best way in
terms of energy consumption, washing and drying performance.
4. Clean all rough waste before you place dirty dishes to the machine.
5. Operate the machine after it is completely full.
6. Use pre-washing program only when necessary.
7. Observe program information and average consumption values table when selecting a
program.
8. Since the machine will reach high temperatures, it should not be mounted near refrigerator.
9. If the appliance is located in a place where the risk of freezing exists, you must completely
drain the water that has remained in the machine. Turn off the water tap, disconnect the
water inlet hose from the tap and allow the interior water to drain.
PRACTICAL AND USEFUL INFORMATION
26
LIMITATIONS OF WARRANTY
“Operating Manual”
1. This warranty is not valid in case of the following events:
a) If the warranty card is not fully and properly filled in and signed at the time of
purchase/ installation by the company’sauthorized dealer / service engineer.
b) If the completed warranty card is not presented to the authorized personnel at
the time of service / repair.
c) If the appliance is not used in accordance with manufacturer’s instructions given
in the
d) If the washing machine has been installed, serviced, repaired, opened or
tampered by any unauthorized personnel.
e) If defects arise/caused by accidents, alteration, misuse, neglect, abuse,
substitution of original components with spurious/non genuine components,
attacked by household pest /rodents,fire, flood, earthquake, lightning and/or
any other acts of God/natural, calamities.
f) If defects arising with optional accessories like trolleys, rat mesh, machine
cover, on-line filter, inlet /exhaust extension hoses, tap adapter, extended power
supply cable, adjustment feet cover,etc. thereof.
g) If damages occur by improper electrical circuits outside the washing machine or
by any electrical supply thereof.
h) If the machine serial number on the appliance is defaced, missing or altered.
i) If sea water or any substandard detergent has been used in the appliance.
j) If the appliance is taken out of India.
2. This warranty does not cover any type of painting, plating including rusting etc.,or
defects thereof.
3. The company is not liable for any incidental or consequential damages.
4. Parts replaced or repaired under this warranty are warranted throughout the
remaining of the original
warranty period.
.
5.
The company is not liable for any delay in servicing due to reasons beyond the
control of the company or any of its authorized service centre.
6. This warranty is not applicable, if the washing machine is used for commercial
purpose or at places like institutions, hostels, hospitals, community halls and other
similar applications.
LIMITATIONS OF WARRANTY
“Operating Manual”
W
A
R
R
A
N
T
Y
Y
E
A
R
WARRANTY
IFB Industries Ltd. (”The Company”) warrants to the original
domestic purchaser of this washing machine (”Appliance”) that it
is free from defects in workmanship and materials. During 12
months from the date of purchase of the new washing machine all
the parts of the washing machine which prove to be defective in
workmanship and/or materials shall be replaced or repaired free
of charge on intimation to the company/ company’s authorized
service centre nearest to the place where the appliance is
installed. This warranty is subject to limitations of warranty.
WARRANTY
2
7. For any service under this warranty beyond city/town/municipal limits from
the company /authorized service centre, a fixed charge of Rs. 250/- will be
collected from the customers in addition to the actual to and fro charges by the
shortest route. Alternatively, the customer can bring the appliance to the nearest
service centre for carrying out the necessary repairs, at customer’s own cost.
8. During the warranty period, whenever the appliance is shifted from the
original city of purchase to another city / town where service is provided by the
company’s authorized service agent, a warranty transfer charge of Rs. 300/- will
be collected from the customer by the company’s authorized service agent. The
above charges also include the reinstallation charges of the appliance. However,
in case of transfer to a city where the company provides direct service, a nominal
charge of Rs. 250/- only will be collected from the customer towards
reinstallation. The Company, however, shall not undertake the responsibility of
shifting / transfering the appliance from the location where the appliance is
originally installed.
9. This warranty is issued subject to the jurisdiction of Calcutta courts. and /or other
judicial / quasi judicial forums having jurisdiction over the registered office of
the company.
10. This is the ONLY WARRANTYcovering the appliance given by the company.
First Name Middle Nam e Last Name
CUSTOMER COPY
Mr./Mrs./Ms.
Address.
Telephone No.:
Model Name:
Serial No.:
Date of Purchase:
Cash Memo No.:
Dealer Name and:
Address Stamp:
==============================================================
Service Station Copy
Mr./Mrs./Ms
Address:
Pin Code:
Telephone No.: （R） （
O）
E-mail Address:
Model Name:
Serial No.:
Date of Purchase:
Cash Memo No.:
Products Owned by the customer:(Please tick in the appropriate box.)
Washing Machine Refrigerator Color TV 100% Clothes Dryer Dishwasher
Music System Oven Toaster Grill 2 Wheeler Car Air Conditioner
IFB Industries Limited
Regd. Off : 14 Taratolla Road, Kolkata - 700088
52059166
Loading...