IEI Technology WAFER-ULT-i1, WAFER-ULT2-i1 Quick Installation Manual

Download

Page 1

3.5" SBC supports Intel® 22nm 4th / 14nm 5th Generation Mobile Core™ i7/i5/i3 and Celeron® on-board Processor (ULT),

VGA, LVDS, iDP, Dual GbE, PCIe Mini, USB 3.0, SATA 6Gb/s, Audio,

iRIS-1010 and RoHS

WAFER-ULT-i1

WAFER-ULT2-i1

Quick Installation Guide

Version 1.11

March 2018

Package List

WAFER-ULT-i1/WAFER-ULT2-i1 package includes the following items:  1 x WAFER-ULT-i1/WAFER-ULT2-i1 single board computer with

enclosure heatsink

 2 x SATA with 5V output cable kit  1 x Audio cable  1 x Dual-port USB 2.0 cable  1 x Power cable  1 x QIG

Page 2

Specifications

 CPU:

≫ Intel® 5th generation mobile ULT on-board SoC

Intel® Core™ i7-5650U (2.2GHz, dual-core, 4MB cache, TDP=15W)

Intel® Core™ i5-5350U (1.8GHz, dual-core, 3MB cache, TDP=15W)

Intel® Core™ i3-5010U (2.1GHz, dual-core, 3MB cache, TDP=15W)

Intel® Celeron® processor 3765U (1.9GHz, dual-core, 2MB cache, TDP=15W)

≫ Intel® 4th generation mobile ULT on-board SoC

Intel® Core™ i7-4650U (1.7GHz, dual-core, 4MB cache, TDP=15W)

Intel® Core™ i5-4300U (1.9GHz, dual-core, 3MB cache, TDP=15W)

Intel® Core™ i3-4010U (1.7GHz, dual-core, 3MB cache, TDP=15W)

Intel® Celeron® processor 2980U (1.6GHz, dual-core, 2MB cache, TDP=15W)

 Memory:

Two 204-pin 1600/1333 MHz dual-channel unbuffered DDR3L SDRAM SO-DIMMs support up to 16 GB

 BIOS: UEFI BIOS

 Graphics:

≫ Intel® 5th generation mobile ULT on-board SoC

Intel® HD Graphics Gen 8 supports DX11.1, OpenGL 4.2 and OpenCL 1.2 Full MPEG2, VC1, AVC decode

≫ Intel® 4th generation mobile ULT on-board SoC

Intel® HD Graphics Gen 7.5 supports DX11.1, OpenGL 4.2 and OpenCL 1.2 Full MPEG2, VC1, AVC decode

Page 3

 Display Output:

Triple independent display

VGA (up to 2560x1600@60Hz)

18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)

iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60 Hz)

 Ethernet:

GbE1: Intel® I218LM PHY with Intel® AMT 9.0 support

GbE2: Intel® I210-AT PCIe controller with NCSI support

 Super IO: Fintek F81866

 Extemal I/O Interfaces:

1 x RS-232

2 x USB 3.0

 Internal I/O Interfaces:

1 x KB/MS (1x6 pin)

1 x RS-422/485 (1x4 pin, P=2.0)

2 x RS-232 (2x5 pin, P=2.0)

2 x SATA 6Gb/s with 5V power connector (no RAID)

2 x USB 2.0 (2x4 pin, P=2.0)

 iRIS Remote Management Module:

1 x iRIS-1010 slot

 Expansion:

1 x Full-size/half-size PCIe Mini card slot (mSATA support)

 Audio:

1 x Analog audio (2x5 pin)

 Front Panel:

1 x Power LED & HDD LED (1x6 pin)

1 x Power button (1x2 pin)

1 x Reset button (1x2 pin)

 LAN LED:

2 x LAN LED (1x2 pin)

Page 4

 Digital I/O: 1 x 8-bit digital I/O (2x5 pin)

 Fan Connector:

1 x System smart fan (1x4 pin)

 Watchdog Timer:

Software programmable, supports 1~255 sec. system reset

 Power Supply:

12V only DC input

1 x Internal power connector (2x2 pin)

Support AT/ATX mode

 Power Consumption:

12V@2.72A (Intel® Core™ i5-4300U CPU with two 8GB 1600MHz DDR3L memory)

 Operating Temperature:

-10°C ~ 60°C

 Storage Temperature:

-20°C ~ 70°C

 Operating Humidity: 5% ~ 95%, non-condensing

 Dimensions: 146 mm x 102 mm

 Weight (GW/NW): 600 g/250 g

Page 5

Ordering Information

 WAFER-ULT-i1-i7-R11:

3.5" SBC with Intel® 22nm 4th Generation ULT Mobile Core™

i7-4650U processor (ULT), VGA, LVDS, iDP, Dual GbE, USB 3.0,

PCIe Mini, SATA 6Gb/s, iRIS-1010 and RoHS

 WAFER-ULT-i1-i5-R11:

3.5" SBC with Intel® 22nm 4th Gen ULT Mobile Core™ i5-4300U