Page 1
1
3.5” SBC with Intel® 22nm A to m™/C eleron® on-board SoC,
VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini,
SATA 3Gb/s, mSATA, COM, Audio an d RoHS
WAFER-BT-i1
Quick Installation Guide
Version 1.0
Nov 11, 2014.
Package List
WAFER-BT-i1 package includes the fol lowing items:
1 x WAFER-BT-i1 single boar d computer
1 x SATA with power cab l e kit ( P/ N: 32801-000201-100-RS)
1 x Audio cable (P/N: 32 000-072100-RS)
1 x Power cable (P/N: 32100-087100-RS)
1 x QIG (Quick Installation Guide)
1 x Utility CD
©2006 Copyright by IEI Integration corp.
All rights reserved.
Page 2
2
Specifications
SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core,
2MB cache, TDP=10W)
Intel® Atom™ E3827 on-boar d SoC (1.7 5GHz, dua l-core, 1M B
cache, TDP=8 W)
Intel® Atom™ E3826 on-boar d SoC (1.4 6GHz, dua l-core, 1M B
cache, TDP=7 W)
Intel® Atom™ E3825 on-boar d SoC (1.3 3GHz, dual-core, 1MB
cache, TDP=6 W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core,
512KB cache, TDP= 5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB
cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core,
2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core,
2MB cache, TDP=4. 3W)
BIOS:
AMI UEFI BIOS
Memory:
One 204-pin 1066/1 333 MHz single-channel D DR3L
SO-DIMM support s up to 8GB (J1900, N2930, E3845, E3827,
E3826) or 4GB (N2807, E3825, E3815)
Graphics Engine:
Intel® HD Graphics Gen 7 Engines with 4 execution unit,
supports DX11.1, O penGL 4.2 and OpenCL1.2
Display Output:
Dual Independent Display
1 x VGA (Resolution: 2560x1600@60Hz)
1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz )
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to
3840x2160@60 Hz )
Ethernet:
1 x PCIe GbE by Intel I210 controller (LAN1)
Page 3
3
1 x PCIe GbE by Intel I211 controller (LAN2)
Super IO: Fintek F81866
Embedded Control ler: ITE IT8528E
I/O Interface:
1 x PS/2 KB/MS
2 x SATA 3Gb/s with 5V SATA power connect or ( no RAID)
1 x USB 3.0 (on rear I/O)
5 x USB 2.0 (1 on rear I/O, 4 by pin header)
1 x RS-422/485 (by pin he ader )
3 x RS-232 (1 on rear I/O , 2 by pin header)
SMBus: 1 x 4-pin (1x4) wafer
Audio:
Realtek ALC662 HD codec
1 x Analog audio by 10-pi n ( 2x5) header
Front Panel:
1 x 6-pin (1x6) wafer for p ow er LED & HDD LED
1 x 2-pin (1x2) wafer for p ow er but ton
1 x 2-pin (1x2) wafer for p ow er r eset
LAN LED:
2 x 2-pin header for LAN1 Link LED, LAN 2 Link LED
Expansion:
1 x Full-size PCIe Mini card slot with mSATA support (SATA2
and mSATA share SATA signal)
iRIS Remote Management Module:
1 x iRIS-1010 slot
Digital I/O:
8-bit digital I/O (4-bit input, 4-bit output)
FAN:
1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
Power supply:
12V DC input only (AT/ATX support)
Watchdog Timer:
Software program m able support 1~255 sec. system reset
Power Consumption:
Page 4
4
+12V@1.45A (Intel® Celeron® J1900 CP U, 1 x 8GB 1333
MHz DDR3 memory)
Operating Temperat ur e: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70° C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 146mm x 102mm
Weight(GW/ NW): 600g / 250g
Ordering Information
3.5” SBC supports Intel® 22nm quad-core Celeron® J1900 2.0 GHz
on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, Audio, iRIS-1010 and RoHS
WAFER-BT-i1-J19001-R10:
3.5” SBC supports Intel® 22nm dual-core Celeron® N2807 1.58 GHz
(4.3W) on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0,
PCIe Mini, SATA 3Gb/s, mSATA, COM, Audio, iRIS-1010 and RoHS
WAFER-BT-i1-N28071-R10:
3.5” SBC supports Intel® 22nm quad-core Celeron® N2930 1.86GHz
(7.5W) on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0,
PCIe Mini, SATA 3Gb/s, mSATA, COM, Audio, iRIS-1010 and RoHS
WAFER-BT-i1-N29301-R10:
3.5” SBC supports Intel® 22nm Atom™ E38XX on-board SoC with
VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 3Gb/s,
mSATA, COM, Audio, iRIS-1010 and RoHS ( by order production,
MOQ: 100 )
WAFER-BT-i1-E38XX1-R10:
32000-070301-RS:
Dual-port USB cable
32205-003800-300-RS:
RS-422/485 cable
32006-000300-100-RS: PS/2 KB/MS Y-cable without bracket
Page 5
5
Jumpers setting and connectors
LABEL FUNCTION
PWR_BTN1 Power On/Off button pin header
RST_BTN1 System Reset button pin header
J_ATX_AT1 AT/ATX mode select switch
J_CMOS1 Clear CMOS button
COM1, COM2, COM3
Serial port, RS-232
COM4
Serial port, RS-422/485
CN4 Front Panel Pin Header
D-SUB VGA connector
USB1, USB4 USB2.0 Port Pin Header
USB2 USB2.0 Port connector
USB3 USB3.0 Port connector
DIO1
8 Bits Digital I/O Pin Header
JSPI1 BIOS SPI ROM Programming Pin
JSPI2 EC SPI ROM Programming Pin
CPU_FAN1 CPU smart FAN connector
SYS_FAN1 System smart FAN connector
LED_LAN1, LED_LAN2 LAN link LED connector
KB_MS1 Keyboard & mouse pin header
CN5 +12V DC power input connector2
CN2 SMBUS connector
DP1 DP port internal pin header
SATA_PWR1, SATA_PWR2
SATA power connectors (5 V)
SATA1, SAT A2 SATA 3Gb/s drive connectors
AUDIO1
Audio pin header
INV1 LCD panel backlight power connector
LVDS_PWR1 LCD voltage selection
LVDS1 LVDS panel Connector
SW1 LVDS panel resolution selection
J_FLASH1 Flash Descriptor Security Override/ TXE
Page 6
6
COM1: (RS-232) Rear Port Define
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 NDCD1# 6 NDSR1#
2 NRXD1 7 NRTS1#
3 NTXD1 8 NCTS1#
4 NDTR1# 9 NRI1#
5 GND
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
DESCRIPTION
Short A - B
ATX Mode (default)
Short B - C
AT Mode
RST_BTN1: System Reset button pinheader
PIN NO.
DESCRIPTION
Open
Normal Operation (Default)
Short
Reset
J_CMOS1: Clear CMOS button
PIN NO.
DESCRIPTION
Open
Normal Operation (Default)
Push
Clear CMOS Setup
PWR_BTN1: Power On/Off button pinheader
PIN NO.
DESCRIPTION
Open
Normal Operation (Default)
Short
Power on/off
Page 7
7
CN4: Front Panel Pin Header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
GND
3
PWR_LED+
4
PWR_LED-
5 HDD_LED+ 6 HDD_LED-
COM4: RS-422/485 serial po rt connector
PIN
DESCRIPTION PIN DESCRIPTION
1 RXD485# 2 RXD485+
3 TXD485+ 4 TXD485#
COM2: (RS-232) Pinheader
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 NDCD2 6 NDSR2
2 NRXD2 7 NRTS2
3 NTXD2 8 NCTS2
4 NDTR2 9 NRI2
5 GND 10 GND
COM3: (RS-232) Pinheader
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 NDCD3 6 NDSR3
2 NRXD3 7 NRTS3
3 NTXD3 8 NCTS3
4 NDTR3 9 NRI3
5 GND 10 GND
Page 8
8
USB2: USB2.0 Port connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
-DATA_USB3
3
-DATA_USB4
4
GND
USB1: USB2.0 Port Pin Header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
GND
3
-DATA_USB3
4
-DATA_USB4
5
+DATA_USB3
6
+DATA_USB4
7
GND
8
+5V
USB4: USB2.0 Port Pin Header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
GND
3
-DATA_USB1
4
-DATA_USB2
5
+DATA_USB1
6
+DATA_USB2
7
GND
8
+5V
D-SUB: VGA connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 Red 2 Green
3 Blue 4 NC
5
GND
6
GND
7 GND 8 GND
9 VGAVCC 10 HOTPLUG
11
NC
12
DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
Page 9
9
CPU_FAN1: CPU smart FAN connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
FANIO1
4
FANOUT1
JSPI2: EC SPI ROM Programming Pin
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +SPI_VCC_EC 2 SPI_CS0#_CN_EC
3 SPI_SO0_CN_EC 4 SPI_CLK0_CN_EC
5 SPI_SI0_CN_EC 6 GND
JSPI1: BIOS SPI ROM Programming Pin
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +SPI_VCC 2 SPI_CS0#_CN
3
SPI_SO0_CN
4
SPI_CLK0_CN
5
SPI_SI0_CN
6
GND
DIO1: 8 Bits Digital I/O Pin Header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+5V
3
DGPO3
4
DGPO2
5
DGPO1
6
DGPO0
7
DGPI3
8
DGPI2
9
DGPI1
10
DGPI0
USB3: USB3.0 Port connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
USB2P0-
3
USB2P0+
4
GND
5
USB3P0_RXDN1
6
USB3P0_RXDP1
7
GND
8
USB3P0_TXDN1
9
USB3P0_TXDP1
Page 10
10
CN2: SMBUS connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
SMBDATA
3
SMBCLK
4
+5V
CN5: +12V DC power input connector 2
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
GND
3
+12V
4
+12V
KB_MS1: Keyboard & mouse pin header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V_KBMS
2
MSDATA
3
MSCLK
4
KBDATA
5
KBCLK
6
GND
LED_LAN2: LAN2 link LED connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3VLAN 2 LAN2_LED_LINK#
LED_LAN: LAN1 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3VLAN
2
LAN1_LED_LINK#
SYS_FAN1: System smart FAN connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
FANIO2
4
FANOUT2
Page 11
11
AUDIO1：Audio pin header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 LINE_OUTR 2 LINEIN_R
3 Analog_GND 4 Analog_GND
5 LINE_OUTL 6 LINEIN_L
7 Analog_GND 8 Analog_GND
9 LMIC1-R 10 LMIC1-L
SATA1, SATA2: SATA 3Gb/s Drive Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
SATA_TX+
3
SATA_TX-
4
GND
5
SATA_RX+
6
SATA_RX-
7
GND
SATA_PWR1, SATA_PWR2: SATA Power Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 2 GND
DP1: DP port internal pin header
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 2 DPD_OB_LANE1_N
3 DPD_OB_LANE1_P 4 GND
5
DPD_OB_LANE3_N
6
DPD_OB_LANE3_P
7 GND 8 AUX_CTRL_DET_D
9 GND 10 DDI1_HPD#
11
DPD_AUX_CTRL_P
2
12 DPD_AUX_CTRL_N2
13 GND 14 DPD_OB_LANE2_P
15 DPD_OB_LANE2_N 16 GND
17
DPD_OB_LANE0_P
18
DPD_OB_LANE0_N
19 +3.3V 20 NC
Page 12
12
LVDS1: LVDS panel Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
16
LVDSB_DATA0#
2
GND
17
LVDSB_DATA1
3 LVDSA_DATA0 18 LVDSBDATA1#
4 LVDSA_DATA0# 19 LVDSB_DATA2
5
LVDSA_DATA1
20
LVDSB_DATA2#
6 LVDSA_DATA1# 21 LVDSB_CLK
7 LVDSA_DATA2 22 LVDSB_CLK#
8
LVDSA_DATA2#
23
LVDSB_DATA3
9
LVDSA_CLK
24
LVDSB_DATA3#
10 LVDSA_CLK# 25 GND
11
LVDSA_DATA3
26
GND
12
LVDSA_DATA3#
27
+3.3V
13 GND 28 +3.3V
14 GND 29 +3.3V
15
LVDSB_DATA0
30
+3.3V
INV1: LCD panel backlight power connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
BL_PWM
2
GND
3
+12V
4
GND
5
BL_EN
J_LCD_PWR1: LCD voltage selection
PIN NO.
DESCRIPTION
Short A- B
+3.3 V (Default)
Short B- C
+5 V
Page 13
13
J_FLASH1: Flash Descriptor Security Overide/ TXE
PIN NO.
DESCRIPTION
Short 1-2
No override Mode (Default)
Short 2-3
Override Mode
SW1: LVDS panel resolution selection
* ON=0, OFF=1; Single=S, Dual=D
4-3-2-1
DESCRIPTION
0000
800x600 18-bit Single (Default)
0001 1024x768 18-bit Single
0010 1024x768 24-bit Single
0011 1280x768 18-bit Single
0100 1280x800 18-bit Single
0101 1280x960 18-bit Single
0110
1280x1024 24-bit Dual
0111
1366x768 18-bit Single
1000
1366x768 24-bit Single
1001
1440x960 24-bit Dual
1010
1400x1050 24-bit Dual
1011
1600x900 24-bit Dual
1100
1680x1050 24-bit Dual
1101
1600x1200 24-bit Dual
1110
1920x1080 24-bit Dual
1111
1920x1200 24-bit Dual
Page 14
14
Board Layout: Jumper and Connector Locations
(Unit: mm)
Loading...