The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd functi on and d oes not r epresent a com mitm ent on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n
purposes only and m ay be trademarks and/or registe red trademarks of their respec tive
owners.
Figure 3-18: Power Input Connector ...........................................................................................29
Figure 3-19: Serial Device Connector
Figure 3-20: Serial Port Pinout Location
Figure 3-21: Serial Device Connector
Figure 3-22: Serial Port Pinout Location
Figure 3-23: USB Device Connection
Figure 3-24: VGA Connector
Figure 3-25: VGA Connector
The TANK-760 is a platf orm based on the 4th gener ation Intel® Core™ i5 or Celeron®
processor and the Intel® HM86 chipset.
The TANK-760 contains VGA, DisplayPort and HDMI video outputs, which can be applied
to multi-display application and support high Full HD video quality. The TANK-760 is
equipped with an abundant of I/O ports and supports a wide range of operating
temperature. Four USB 3.0 and two USB 2.0 ports provide flexible expansion options.
Serial device connectivity is provided by four RS-232 and two RS-232/422/485 ports.
The TANK-760 can be used as a control center for in-vehicle application, such as buses or
trucks. With dual CAN-bus port, more peripheral devices can be connected for vehicle
applications.
1.2 Model Variations
The model variations of the TANK-760 Series are listed below.
One CFast socket
Support three independent video out puts
Built-in two 2.5" SATA 6Gb/s HDD bays
9 V~36 V DC input
Support IEI iRIS-2400 (IPMI 2.0 compliant)
1.4 Technical Specifications
The TANK-760 technical specifications are listed in Table 1-1.
Specifications
Chassis
Color
Dimensions (WxDxH)
System Fan
Chassis Construction
Motherboard
CPU
Chipset
Memo ry
iRIS Module
iRIS Solution
Storage
Hard Drive
Black C + Silver
310 x 200 x 69.8mm
Fanless
Extruded aluminum alloy
2 x RJ-45
1 x PCIe GbE by Intel® I210
1 x PCIe GbE by Intel® I217LM
4 x DB-9 with isolation
2 x DB-9 RS-232/422/485 with isol ati on
8-bit digital I/O, 4-bit input/4-bit output
2 x Phoenix terminal block with isolation
1 x VGA, 1 x HDMI, 1 x DisplayPort
VGA: Up to 1920 x 1200@60Hz
HDMI: Up to 2500 x 1600@60Hz
DisplayPort: Up to 2500 x 1600@60Hz
1 x Line-out, 1 x Mic-in
Optional 4-channel audi o/v ideo inp ut PCI e Mini Card
1 x 802.11 a/b/g/n ( optional)
Expansions
PCIe Mi n i
Power
Power Input
Power Consumption
Reliability
Mounting
Operating Temperature
Storage Temperature
Humidity
Operating Shock
3 x Full Size (one support mSATA)
Terminal Block: 9 (+/- 0.3v) V~36 V DC
DC Jack: 9 (+/- 0.3v) V~3 6 V DC
19 V@3.2 A (Intel® Core™ i5 i5-4400E with 4 GB memory)
2 x CAN-bus terminal blocks with isolation
1 x CFast
1 x DisplayPort
1 x OLED indicators
1 x Power button
2 x RS-232/422/485 serial ports with isolation
2 x USB 2.0 ports
2 x Wi-Fi antenna connectors
An overview of the front panel is shown in Figure 1-2.
TANK-760 Emb edded System
Page 6
Figure 1-2: TANK-760 Front Panel
1.5.2Rear Panel
The TANK-760 rear pan el contains:
1 x ACC switch
1 x AT/ATX switch
1 x DIO port
1 x HDMI port
1 x Line-out port (green)
1 x Mic-in port (pink)
1 x 4-pin power jack for 9 (+/- 0.3v) V ~ 36V power input
1 x 4-pin terminal block for 9 (+/- 0.3v) V ~ 36V power input
1 x Reset button
2 x RJ-45 LAN ports
4 x RS-232 serial ports with isolation
4 x USB 3.0 ports
1 x VGA port
TANK-760 Emb edded System
Page 7
An overview of the rear panel is shown in Figure 1-3 below.
Figure 1-3: TANK-760 Rear Panel
TANK-760 Emb edded System
Page 8
1.6 LED Indicators
There are several indicators on the front panel of the TANK-760 as shown in Figure 1-4.
Figure 1-4: TANK-760 LED Indicators
WARNING:
The CPU Temperature Alert LED turns red when the CPU temperature
is too high. If this situation occurs, lower the enviro nment tem perature
or close some running applications to cool down the CPU.
TANK-760 Emb edded System
Page 9
1.7 Dimensions
The physical dimensions are shown below:
Figure 1-5: Physical Dimensions (mm)
TANK-760 Emb edded System
Page 10
Chapter
2
2 Unpacking
TANK-760 Emb edded System
Page 11
may result in
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation
permanent damage to the TANK-760 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-760. Dry climates are especially susceptib le to ESD. It is therefore
critical that whenever the TANK-760 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Touch any grounded conducting material before handling
the board. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the TANK-760, place it on an
antic-static pad. This reduces the possibility of ESD damaging the TANK-760.
2.2 Unpacking Precautions
When the TANK-760 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.
Make sure the packing box is facing upwards so the TANK-760 does not fall
out of the box.
Make sure all the components shown in Section 2.3 are present.
TANK-760 Emb edded System
Page 12
2.3 Unpacking Checklist
NOTE:
If some of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI resel ler or
vendor you purchased the TANK-760 from or contact an IEI sales
representative direct ly. To contact an IEI s ales representati ve, please
send an email to
The TANK-760 is shipped with the following components:
Quantity Item and Part Number Imag e
Standard
1 TANK-760 Series
1 Power adapter
(P/N: 63040-010090-050-RS)
1 Power cord
(P/N: 32702-000401-100-RS)
2 Mounting brackets
sales@iei.com.tw.
(P/N: 41020-0163J4-00-RS)
8 Screw kits
(P/N: 19600-000259-00-RS)
1 Pluggable DC-in terminal block
(P/N: 33001-000435-RS)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.