Fanless Embedded Sys tem with Intel® Celeron® N3160 proces sor,
VGA, HDMI, Two Gigabit Ethernet, Four USB 3.0,
RS-232/422/485, RoHS Compliant
User Manual
TANK-610-BW Embedded Sys tem
Page ii
Date Version Changes
13 May 2016 1.00 Initial release
Revision
TANK-610-BW Embedded Sys tem
Page iii
Copyright
COP YRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd functi on and does not represent a com mitm ent on the par t
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n
purposes only and m ay be trademarks and/or registe red trademarks of their respec tive
owners.
TANK-610-BW Embedded Sys tem
Page iv
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HO T SURFAC E
This symbol indicates a hot surface that should not be touched without
taking care.
BIOS Menu 1: Main .......................................................................................................................34
BIOS Menu 2: Advanced
BIOS Menu 3: ACPI Configuration
BIOS Menu 4: F81866 Super IO Configuration
BIOS Menu 5: Serial Port n Configuration Menu
BIOS Menu 6: Hardware Health Configuration
BIOS Menu 7: Secondary Super IO Configuration
BIOS Menu 8: Serial Port n Configuration Menu
BIOS Menu 9: RTC Wake Settings
BIOS Menu 10: Serial Port Console Redirection
BIOS Menu 11: Console Redirection Settings
BIOS Menu 12: iEi Feature
BIOS Menu 13: CPU Configuration
BIOS Menu 14: IDE
BIOS Menu 15: USB Configuration
BIOS Menu 16: Chipset
BIOS Menu 17: Host Bridge
BIOS Menu 18: Graphics Configuration
The TANK-610-BW is a fanless embedded system for wide range temperature
environments. It is power ed by the Intel® Celeron® N3160 processor and supports two
204-pin DDR3L 1.35V SDRAM SO-DIMMs (system Max: 8GB). The TANK-610-BW
supports dual independent display via one VGA port and one HDMI port. The
TANK-610-BW has two GbE LAN ports, four USB 3.0 ports, six RS-232 connectors via
DB-9 and two RS-232/422/485 connectors via DB-9.
1.2 Features
The TANK-610-BW features are listed below:
Intel® Celeron® N3160 proc es sor
Multiple COM ports: six RS-232 and two RS-232/422/485
VGA and HDMI dual independent display
mSATA and one x 2.5" SATA storage device
Wide range temperature
TANK-610-BW Embedded Sys tem
Page 3
1.3 Technical Specifications
The TANK-610-BW technical specifications are listed in Table 1-1.
Specifications
Chassis
Color
Dimension (WxDxH)
System Fan
Chassis Construction
Motherboard
CPU
Chipset
System Memory
Storage
Hard Drive
mS ATA
I/O interfaces
Black C + Silver
184 x 200.6 x 58.2 mm
Fanless
Extruded aluminum alloy
Intel® Celeron® N3160 proc es sor
(up to 2.24GHz, quad-core, 2MB cache, TDP=6W)
Microsoft® Windows 8 Embedded, Microsoft® Windows® Embedded
Standard 7 E
TANK-610-BW Embedded Sys tem
Page 5
1.4 Front Panel
The front panel of the TANK-610-BW has the following features (Figure 1-2):
Figure 1-2: TANK-610-BW Front Panel
Connectors and buttons on the front panel include the following:
1 x AT/ATX mode switch
1 x HDD LED
1 x HDMI port
2 x LAN ports by RJ-45
1 x Line-out port (green)
1 x Mic-in port (pink)
1 x Power button
1 x Reset button
2 x RS-232/422/485 serial ports by DB-9
4 x USB 3.0 ports
1 x VGA port
TANK-610-BW Embedded Sys tem
Page 6
1.5 Rear Panel
The rear panel of the TANK-610-BW has the following features (Figure 1-2):
Figure 1-3: TANK-610-BW Rear Panel
Connectors and buttons on the front panel include the following:
1 x 9 V ~ 36 V DC Jack
6 x RS-232 serial ports by DB-9
1 x 9 V ~ 36 V Terminal Block
TANK-610-BW Embedded Sys tem
Page 7
1.6 Dimensions
The physical dimensions are shown below:
Figure 1-4: Physical Dimensions (millimeters)
TANK-610-BW Embedded Sys tem
Page 8
Chapter
2
2 Unpacking
TANK-610-BW Embedded Sys tem
Page 9
was purchased from or contact an IEI sales
2.1 Unpacking
To unpack the embedded system, follow the steps below:
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the system out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Make sure all the components listed in the packing list are present.
2.2 Packing Lis t
NOTE:
If any of the components l isted in the checklist belo w are missing, do
not proceed with the installat ion. Cont act the I EI reseller or vendor the
TANK-610-BW
representative directl y by sending an email to sales@ieiworld.com.
The TANK-610-BW is shipped with the following components:
Quantity Item and Part Number Ima ge
1 TANK-610-BW
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.