IEI Technology SACFA-KIT01 Quick Installation Manual

SACFA-KIT01

SATA to CFast Converter Board
SATA to CFast 轉接卡

Quick Installation Guide/

快速安裝指南

Version 1.01 March 08, 2017

Features / 產品特色

 Support CFast™ card

支援 CFast™卡

 Compliance with SATA 1.5Gb/s, SATA 3Gb/s and SATA 6Gb/s

與 SATA 1.5Gb/s、SATA 3Gb/s、SATA 6Gb/s 相容

 Wide operating temperature - 0°C ~ 60°C

支援寬溫操作範圍 - 0°C ~ 60°C

Packing List / 內容清單

1 x SACFA-KIT01 converter board / SACFA-KIT01 轉接卡

1 x QIG (Quick Installation Guide) / 快速安裝指南

Specifications / 規格

Connectors 1 x CFast™ socket

1 x SATA connector

SATA Compliance to SATA 1.5Gb/s, 3Gb/s and 6Gb/s

Support SATA hot plug

Operating Temperature 0°C ~ 60°C

Operating Humidity 10% ~ 95%, non-condensing

Dimensions (LxW) 62 mm x 70 mm

Ordering Information / 訂購資料

 SACFA-KIT01-R10:

SATA to 24-pin CFast™ socket converter board

 32801-000100-100-RS

:

SATA 7+15P female to SATA 7P / PH 2.5 4P cable, L=200mm/200mm

 32801-000201-100-RS

:

SATA 7+15P female to SATA 7P / PH 2.0 2P cable, L=150mm/150mm

 32000-080700-RS

:

SATA 7+15P female to SATA 7P / PH 5.08 4P cable, L=200mm/100mm

Connector Pinouts / 連接器腳位定義

SATA1: SATA connector (7+15 pins)

Pin Description Pin Description

S1 GND P1 N/C
S2 TX+ P2 N/C
S3 TX- P3 N/C
S4 GND P4 GND
S5 RX+ P5 GND
S6 RX- P6 GND
S7 GND P7 +5V

P8 +5V
P9 +5V
P10 GND
P11 GND
P12 GND
P13 N/C
P14 N/C
P15 N/C

CFSAT1: CFAST socket

Pin Description Pin Description

S1 GND PC1 CFast_EN#
S2 TX+ PC2 GND
S3 TX- PC3 N/C
S4 GND PC4 N/C
S5 RX+ PC5 N/C
S6 RX- PC6 N/C
S7 GND PC7 N/C

PC8 N/C
PC9 N/C
PC10 N/C
PC11 N/C
PC12 N/C
PC13 +3.3V
PC14 +3.3V
PC15 GND
PC16 GND
PC17 GND

Dimensions / 尺吋 (Unit: mm)

Safety Instructions / 安全守則

Warning! To prevent the system from overheating, do not operate it in an area that exceeds

the maximum operating temperature described in the user manual. Ultimate disposal of this

product should be handled according to all national laws and regulations.

警告！為防止系統過熱，不要在使用手冊上記載的產品工作溫度範圍之外操作此系統。本產品

的廢棄處理應根據該國家的法律和規章進行。

IEI Support URL / IEI 線上諮詢

http://new.ieiworld.com/tw/online_support_form

Compliance / 安規

This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or
installs other devices in the equipment, the CE conformity declaration may no longer apply.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

 This device may not cause harmful interference, and
 This device must accept any interference received, including interference that may cause undesired

operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

According to the requirement of the WEEE legislation the following user information is provided to customers for all
branded IEI Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop o- your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.

Headquarters
威強電工業電腦 IEI Integration Corp.

No. 29, ZhongXing Rd., Xizhi Dist.,
New Taipei City 221, Taiwan
TEL: [phone]
FAX: [phone]
[e-mail]
www.ieiworld.com

America

IEI Technology USA Corp.

138 University Parkway, Pomona,
CA 91768, USA
Tel:[phone]
Fax:[phone]
[e-mail]
usa.ieiworld.com

China
威强电工业电脑 IEI Integration (Shanghai) Corp.

上海市闵行莘庄工业区申富路 515 号
No. 515, Shen Fu Rd., Xin Zhuang Industrial Develop Zone,
Shanghai, 201108, China
Tel:[phone]
Fax:[phone]
[e-mail]
www.ieiworld.com.cn

Copyright ©2017 IEI Integration Corp. All rights reserved.