Page 1
PCIE-9450
Intel Processor LGA775 Pentium
PICMG1.3 Full-Size CPU Card with PCIE-GbE, SATA II RAID, and
USB2.0
®
D
Quick Installation Guide
Version 1.0
Mar. 30, 2006
Package Contents
PCIE-9450 package includes the following items:
1 x PCIE-9450 single board computer
1 x RS-232 cable for 2 ports P/N: 19800-000051-RS
1 x ATA 66/100 flat cable P/N: 32200-000052-RS
4 x SATA cable P/N: 32000-062800-RS
2 x SATA power cable P/N: 32100-088600-RS
1 x USB cable for 2 ports P/N: CB-USB02-RS
1 x Keyboard/ PS2 mouse Y cable P/N: 32000-000138-RS
1 x mini jumper pack P/N: 33100-000033-RS
1 x Utility CD
1 x QIG (quick installation guide)
Ordering Information
Standard
PCIE-9450
PICMG 1.3 LGA775 Intel Pentium D CPU Card with VGA,Dual PCI-Express
GbE,SATA,USB2.0 and Audio
Optional:
1. Audio cable P/N: AC-KIT08R-R10
2. CPU Cooler P/N: CF-520-RS
©2006 Copyright by IEI Technology corp.
All rights reserved.
3. FDD cable P/N: 32200-000017-RS
4. LPT cable P/N: 19800-000049-RS
If any of these items is missing or damaged, contact the dealer from whom you
purchased this product. Save the shipping materials and carton in case you want
to ship or store the product in the future.
Page 2
Specifications
Jumpers/Connections
CPU: Intel LGA775 Pentium D support up to FSB 1066 MHz
BIOS: AMI 4MB Flash Memory
Chipset: Intel 945G and ICH7R
System memory: Daul channel, Four DDRII DIMM sockets support up to
4GB DDRII 533/667
SATA/IDE interface: Support four Serial SATAII hard drives (up to
300MB/s) and two enhanced IDE devices
FDD interface: Support up to two FDDs
Serial ports: Two Serial ports (RS232)
Parallel port: One parallel port, supports SPP/EPP/ECP Modes
Keyboard/Mouse connector: PS/2 type keyboard and mouse
Watchdog timer: software programmable
USB 2.0: Support up to Seven ports
Video output:CRT Intel GMA 950 support up to 2048x1536@75Hz
Ethernet: Dual PCI-Express GbE
Audio: AC97 2.3 (Optional by cable kit)
Block Diagram
Connector Type
CPU12V 4-pin +12V power connector
IR1 IrDA 1x5 pin header
ATXCTL1 ATX 5VSB 3-pin Header
Fan1 3-pin header
CPU_FAN1
IDE ATA-100 40pin connector
FDD 2x17-pin floppy connector
LPT 2x13 pin header
DIO1 Digital I/O 2x5 pin header
CN2 6-pin KB/MS
COM1/2 2x5pin RS232
SATA1~4 SATAII connector
AUDIO1 2x5 pin header for Audio Kit
USB 2x5 pin for USB2.0
CPU_FAN 4pin for CPU FAN
JP1 Clear COMS
CN1 External Switches and indicators Panel
CN2 KB/MS
COM1~2 2x5 pin header for RS232
USB0~7 2x 4 pin header
Jumpers setting and Connectors
CPU12V Power connector
Pin Description Pin Description
1 GND 2 GND
3 +12V 4 +12V
IR1: IrDA connector
Pin No. Description
1 VCC
2 NC
3 IR-RX
4 GND
5 IR-TX
ATXCTL1: ATX 5VSB
Pin No Description
1 5VSB
2 PS-ON
3 GND
FAN1: Fan Connector
Pin No. Description
1 GND
2 +12V
3 Sensor
Page 3
DIO1: Digital I/O
Pin No. Description
1 GND
2 PWR (+5V)
3 XOUT0
4 XOUT1
5 XOUT3
6 XOUT4
7 XIN0
8 XIN1
9 XIN2
10 XIN3
COM1/COM2: RS232
Pin No Description Pin No Description
1 DCD- 2 SIN
3 SOUT 4 DTR5 GND 6 DSR7 RTS- 8 CTS9 RI 10 GND
Board Layout: Jumper and Connector Locations
USB01, USB23, USB45, USB 67
Pin No. Description Pin No. Description
1 PWR(+5V) 2 GND
3 USBPB- 4 USBPB+
5 USBPA+ 6 USBPB7 GND 8 PWR(+5V)
CN2: KB/MS
Pin No. Description
1 PWR(+5V)
2 MS_DATA
3 MS_CLK
4 MS_DATA
5 MS_CLK
6 GND
AUDIO1: AC97 Connector for Audio Module
Pin No Description Pin No Description
1 AC_SYNC 2 AC_CLK
3 AC_SDOUT 4 PC_BEEP
5 AC_SDIN 6 AC_RST#
7 PWR (+5V) 8 GND
9 PWR (+12V) 10 (N/C)GND
9 7 5 3 1
● ● ● ● ■
● ● ● ● ●
10 8 6 4 2
CN1: External Switches and indicators Panel
Pin Description Pin Description
1 PWR LED+ 2 PC_BEEP
3 PWR LED- 4 GND
5 PWR ON+ 6 NC
7 PWR ON- 8 PWR(+5V)
9 HDD LED+ 10 Reset+
11 HDD LED- 12 Reset-
JP1 Description
1-2
(Default)*
Short 2-3 Clear CMOS Setup
CPU_FAN1: Fan Connector
Pin No. Description
1 GND
2 +12V
3 Sensor
4 Control
Keep CMOS Setup
Loading...