1
PCIe Mini Module supports Quad RS-232/422/485 or
Dual RS-232/422/485 and 16-bit GPIO, Full Size, RoHS
MPCIE-UART-KIT01
MPCIE-UART-KIT02
Quick Installation Guide
Version 1.0
November 9, 2015
Package List
MPCIE-UART-KIT01/MPCIE-UART-KIT02 package includes the
following items:
z 1 x MPCIE-UART-KIT01/MPCIE-UART-KIT02 PCIe Mini module
z 2 x D-sub 9-pin male cable module
z 1 x QIG
Copyright © 2015 IEI Integration Corp.
All rights reserved.
2
Features
z Supports quad RS-232/422/485 (for MPCIE-UART-KIT01) or
supports dual RS-232/422/485 and 16-bit GPIO (for MPCIE-UART-KIT02)
z 128 bytes of transmit/receive FIFO
z High-speed 16C550/16C650/16C750/16C850 compatible UARTs
z Supports baud rates of 115.2K, maximum up to 1.5M
z All GPIO supports digit IO for input/output control, output data contol
and input status (MPCIE-UART-KIT02 only)
z Supports high/low level/pulse, open drain/push pull function selection
(MPCIE-UART-KIT02 only)
Specifications
z Form Factor: PCI Express Mini Card
z PCI Express Bridge to Quad Serial Port: Fintek F81504
z Buffer/Transceiver Series: F81439
z IO:
≫
For MPCIE-UART-KIT01: 4 x RS-232/422/485 (2x5-pin header)
≫ For MPCIE-UART-KIT02:
2 x RS-232/422/485 (2x5-pin header)
2 x 8-bit GPIO (2x5-pin header)
z Operating Temperature: 0°C ~ 60°C
z Operating Humidity: 10% ~ 95%, non-condensing
z Dimensions (LxW): 51 mm x 30 mm
z Weight (GW/NW): 100 g/50 g
Ordering Information
z MPCIE-UART-KIT01-R10:
PCIe Mini module supports quad RS-232/422/485, full size, RoHS
3
z MPCIE-UART-KIT02-R10:
PCIe Mini module supports dual RS-232/422/485 and 16-bit GPIO,
full size, RoHS
Jumper Settings and Connectors
2468 10
● ● ● ● ●
● ● ● ● ●
1357 9
COM3 (for MPCIE-UART-KIT02-R10): 8-bit GPIO connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC
3 GPIO7 4 GPIO6
5 GPIO5 6 GPIO4
7 GPIO3 8 GPIO2
9 GPIO1 10 GPIO0
COM4 (for MPCIE-UART-KIT02-R10): 8-bit GPIO connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC
3 GPIO15 4 GPIO14
5 GPIO13 6 GPIO12
7 GPIO11 8 GPIO10
9 GPIO9 10 GPIO8
COM1/COM2/COM3/COM4: RS-232/422/485 serial port connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 DCDN 2 DSRN
3 SINN 4 RTSN
5 SOUTN 6 CTSN
7 DTRN 8 RIN
9 GND 10 GND
4
Board Layout: Jumper and Connector Locations
(Unit: mm)
SW1: Mode selection switch
* ON=0, OFF=1
4-3-2-1 DESCRIPTION
0000 Four RS-422 (default)
0001 COM1 & 2=RS-485, COM3 & 4=RS-422
0010 COM1 & 2=RS-232, COM3 & 4=RS-422
0011 COM1 & 2=shutdown, COM3 & 4=RS-422
0100 COM1 & 2=RS-422, COM3 & 4=RS-485
0101 Four RS-485
0110 COM1 & 2=RS-232, COM3 & 4=RS-485
0111 COM1 & 2=shutdown, COM3 & 4=RS-485
1000 COM1 & 2=RS-422, COM3 & 4=RS-232
1001 COM1 & 2=RS-485, COM3 & 4=RS-232
1010 Four RS-232
1011 COM1 & 2=shutdown, COM3 & 4=RS-232
1100 COM1 & 2=RS-422, COM3 & 4=shutdown
1101 COM1 & 2=RS-485, COM3 & 4=shutdown
1110 COM1 & 2=RS-232, COM3 & 4=shutdown
1111 All shutdown
Loading...