Fanless Embedded System with Intel® 4th generatio n i5, Pentium® or
Celeron ® proces sor, VGA, DVI-D, Tw o Gigabit Ethernet,
Four USB 3.0, RS-232/422/485, RoHS Compliant
User Manual
Page 2
ITCS-100-H81 Embedded Sys tem
Page ii
Date Version Changes
17 October 2016 1.00 Initial release
Revision
Page 3
ITCS-100-H81 Embedded Sys tem
Page iii
Copyright
COP YRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd funct ion and does not r epresent a com mitm ent on the par t
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n
purposes only and m ay be trademarks and/or registe red trademarks of their respec tive
owners.
Page 4
ITCS-100-H81 Embedded Sys tem
Page iv
Manual Conve ntions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HO T SURF AC E
This symbol indicates a hot surface that should not be touched without
taking care.
BIOS Menu 1: Main .......................................................................................................................26
BIOS Menu 2: Advanced
BIOS Menu 3: ACPI Configuration
BIOS Menu 4: RTC Wake Settings
BIOS Menu 5: Trusted Computing
BIOS Menu 6: CPU Configuration
BIOS Menu 7: IDE
BIOS Menu 8: Intel(R) Rapid Start Technology
BIOS Menu 9: USB Configuration
BIOS Menu 10: Secondary Super IO Configuration
BIOS Menu 11: Serial Port n Configuration Menu
BIOS Menu 12: F81866 Super IO Configuration
BIOS Menu 13: Serial Port n Configuration Menu
BIOS Menu 14: Hardware Health Configuration
BIOS Menu 15: Serial Port Console Redirection
BIOS Menu 16: Console Redirection Settings
BIOS Menu 17: iEi Feature
BIOS Menu 18: Chipset
BIOS Menu 19: PCH-IO Configuration
BIOS Menu 20: PCH Azalia Configuration
BIOS Menu 21: System Agent (SA) Configuration
BIOS Menu 22: Graphics Configuration
BIOS Menu 23: Memory Configuration
BIOS Menu 24: Boot
BIOS Menu 25: Security
BIOS Menu 26:Exit
BIOS Menu 27: Server Mgmt
BIOS Menu 28: System Event Log
BIOS Menu 29: System Event Log
The ITCS-100-H81 is a fanless embedded system for wide range temperature
environments. It accepts an Intel® 4t h generation i5, Pentium® or Celeron® processor
and supports one 204-pin DDR3 SO-DIMM up to 8GB (4GB pre-install).The
ITCS-100-H81 embedded system is with one VGA port and one DVI-D port for dual
display. The ITCS-100-H81 supports two 3.5” SATA HDD w ith up to 6 Gb/s data transf er
rate. Four RS-232 serial ports via DB-78, four RS-232/422/485 s er ial ports v ia DB -78 and
four external USB 2.0 ports ensure simplified connectivity to a variety of external
peripheral devices.
1.2 Features
The ITCS-100-H81 features are listed below:
LGA 1150 Intel® 4th generation i5, Pentium® or Celeron® processor
Multiple COM ports: four RS-232 and four RS-232/422/485
VGA and DVI-D dual independent display
2 x 3.5'' HDD bay
Page 13
ITCS-100-H81 Embedded Sys tem
Page 3
1.3 Technical Specifications
The ITCS-100-H81 technical specifications are listed in Table 1-1.
Specifications
Chassis
Color
Dimension (WxDxH)
System Fan
Chassis Construction
Motherboard
CPU
Chipset
System Memory
Storage
HDD/SSD
Flash
I/O interfaces
Black
310 x 200 x 112.8 mm
Fanless
Aluminum alloys
LGA 1150 Intel® 4th generation i5, Pentium® or Celeron® processor
H81
1 x 204pin DDR3 SO-DIMM, 4GB pre-install
(system max 8GB)
2 x 3.5'' HDD bay, SATA III
2G on board flash
USB
Ethernet
COM
DIO
Video c apture
Display
KB/MS
Audio
4 x USB 2.0
2 x 10/100/1000 Mbps
4 x RS232 + 4 x RS232/422/485
(SCSI type, 4 x RS232/422/485 with isolation)
12 x DI + 12 x DO
1 x BNC connector ; PCIe mini for IVCME-C604
1 x VGA
1 x DVI-D
PS/2 keyboard/mouse connector
1 x Line-out, 1 x Mic-in
Page 14
ITCS-100-H81 Embedded Sys tem
Page 4
Specifications
Button
Indicator
TPM
Expansions
PC Ie Min i
Power
Power Input
Power Consumption
Reliability
Mounting
1 x power
1 x reset
1 x Software LED
1 x HDD LED
24 x DIO
8 x Com port
1 x 20-pin LPC
PCIe mini with mSATA signal
19V DC, 4.74A
TBD
Wall mount
Operating Temperature
Storage Tem perature
Humidity
Watchdog timer
Operating Shock
Operating Vibration
Certification
OS
Supported OS
Table 1-1: Technical Specifications
-20°C ~ 55°C
-30°C ~ 70°C
10%~90%(non-condensing)
Software programmable supports 1~255 sec, system reset
Half-sine wave shock 5G,11ms,3 shocks per axis
MIL-STD-810G 514.6C-1(SSD)
CE / FCC
Windows Embedded 7, Windows Embedded 8, Linux (Ubuntu)
Page 15
ITCS-100-H81 Embedded Sys tem
Page 5
1.4 Front Panel
The front panel of the ITCS-100-H81 has the following features (Figure 1-2):
Figure 1-2: ITCS-100-H81 Front Panel
Connectors and buttons on the front pane l incl ude the f ollo wing:
1 x DIO and COM indicators
1 x HDD LED
1 x Power button
1 x Reset button
2 x USB 2.0 ports
Page 16
ITCS-100-H81 Embedded Sys tem
Page 6
1.5 Rear Panel
The rear panel of the ITCS-100-H81 has the following features (Figure 1-2):
Figure 1-3: ITCS-100-H81 Rear Panel
Connectors on the front panel include the following:
1 x DIO port by DB-25
1 x DVI-D port
1 x Line-out port (green)
1 x Keyboard connector (purple)
1 x Mic-in port (pink)
1 x Mouse connector (green)
1 x Power input
2 x RJ-45 LAN ports
4 x RS-232/422/485 serial ports with isolation
4 x RS-232 serial ports
2 x USB 2.0 ports
1 x VGA port
Page 17
ITCS-100-H81 Embedded Sys tem
Page 7
1.6 Dimensions
The physical dimensions are shown below:
Figure 1-4: Physical Dimensions (millimeters)
Page 18
ITCS-100-H81 Embedded Sys tem
Page 8
Chapter
2
2 Unpacking
Page 19
ITCS-100-H81 Embedded Sys tem
Page 9
was purchased from or contact an IEI sales
2.1 Unpacking
To unpack the embedded system, follow the steps below:
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the system out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Make sure all the components listed in the packing list are present.
2.2 Packing Lis t
NOTE:
If any of the components l isted in the checklist be low are missing, do
not proceed with the installat ion. Cont act the I EI reseller or vendor the
ITCS-100-H81
representative directl y by sending an email to sales@ieiworld.com.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.