Page 1
IOVU-430S Panel PC
MODEL:
IOVU-430S
4.3" Touch Panel PC, Samsung S3C2416 400 MHz CPU,
Fast Ethernet, USB, microSD, CAN Bus, RS-232/422/485,
RoHS Compliant, IP 64 Compliant Front Panel
User Manual
Rev. 1.10 – November 27, 2014
Page i
Page 2
Date Version Changes
November 27, 2014 1.10 Updated for R11 version:
- Changed miniSD slot to microSD slot
- Updated Section 3.5.1: Wireless Connection Setup
September 4, 2012 1.01 Minor change
August 20, 2012 1.00 Initial release
IOVU-430S Panel PC
Revision
Page ii
Page 3
IOVU-430S Panel PC
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
Page 4
IOVU-430S Panel PC
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS................................................................................................... 3
1.3 BENEFITS ................................................................................................................... 3
1.4 FEATURES................................................................................................................... 3
1.5 FRONT PANEL............................................................................................................. 4
1.6 CONNECTOR PANEL.................................................................................................... 5
1.7 DIMENSIONS............................................................................................................... 6
1.8 POWER SUPPL Y AND BATTERY.................................................................................... 7
1.9 TECHNICAL SPECIFICATIONS ...................................................................................... 8
1.10 CERTIFICATIONS ....................................................................................................... 9
2 UNPACKING............................................................................................................... 10
2.1 ANTI-STATIC PRECAUTIONS.......................................................................................11
2.2 UNPACKING PRECAUTIONS........................................................................................11
2.3 UNPACKING CHECKLIST........................................................................................... 12
2.4 OPTIONAL ITEMS...................................................................................................... 13
3 INSTALLATION ......................................................................................................... 14
INSTALLATION PRECAUTIONS ................................................................................... 15
3.1
3.2 MICROSD CARD INSTALLATION................................................................................ 15
3.3
EXTERNAL PERIPHERAL INTERFACE CONNECTORS................................................... 16
3.3.1 12 V–36 V DC T erminal Block......................................................................... 17
3.3.2 GPIO and CAN Bus Connector ....................................................................... 17
3.3.3 RS-232/422/485 Serial Port............................................................................. 18
3.3.3.1 Connecting the Serial Port........................................................................ 18
3.3.3.2 RS-232/422/485 Selection........................................................................ 19
3.3.3.3 Pinouts....................................................................................................... 20
3.3.4 USB Host Connector........................................................................................ 21
3.3.5 Ethernet Connector.......................................................................................... 21
3.4 IN-WALL MOUNTING................................................................................................ 23
Page iv
Page 5
IOVU-430S Panel PC
SOFTWARE................................................................................................................ 24
3.5
3.5.1 Wireless Connection Setup............................................................................... 25
A CERTIFICATIONS .................................................................................................... 29
A.1 ROHS COMPLIANT.................................................................................................. 30
A.2 IP 64 COMPLIANT FRONT PANEL ............................................................................. 30
B SAFETY PRECAUTIONS......................................................................................... 31
B.1 SAFETY PRECAUTIONS............................................................................................. 32
B.1.1 General Safety Precautions............................................................................. 32
B.1.2 Anti-static Precautions.................................................................................... 33
B.2
MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 33
B.2.1 Maintenance and Cleaning.............................................................................. 33
B.2.2 Cleaning Tools................................................................................................. 34
B.3 SURGE PROTECTION TESTING.................................................................................. 34
B.4 FCC PRECAUTIONS ................................................................................................. 35
C HAZARDOUS MATERIALS DISCLOSURE ......................................................... 36
C.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CER TIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY....................................... 37
Page v
Page 6
IOVU-430S Panel PC
List of Figures
Figure 1-1: IOVU-430S....................................................................................................................2
Figure 1-2: Front Panel ..................................................................................................................4
Figure 1-3: IOVU-430S Peripheral Connectors............................................................................5
Figure 1-4: IOVU-430S Physical Dimensions (millimeters)........................................................6
Figure 1-5: Power Input Connector...............................................................................................7
Figure 3-1: microSD Card Installation........................................................................................15
Figure 3-2: IOVU-430S Peripheral Connectors..........................................................................16
Figure 3-3: Power Terminal Block...............................................................................................17
Figure 3-4: GPIO and CAN Bus Terminal Block........................................................................18
Figure 3-5: Serial Device Connector...........................................................................................19
Figure 3-6: COM1 mode setting ..................................................................................................19
Figure 3–7: Serial Port Pinouts...................................................................................................20
Figure 3-8: USB Connector..........................................................................................................21
Figure 3-9: LAN Connection........................................................................................................22
Figure 3-10: Ethernet Connector.................................................................................................22
Figure 3-11: Chassis Support Screws........................................................................................23
Figure 3-12: In-wall Cage Screw Holes.......................................................................................24
Figure 3-13: In-wall Mounting......................................................................................................24
Figure 3-14: Laird Connection Manager.....................................................................................25
Figure 3-15: Laird Connection Manager–Scan..........................................................................26
Figure 3-16: Laird Connection Manager–Admin Login.............................................................26
Figure 3-17: Laird Connection Manager–Icm ............................................................................26
Figure 3-18: Laird Connection Manager–Manage Profiles.......................................................27
Figure 3-19: Laird Connection Manager–Enter Password .......................................................27
Figure 3-20: Laird Connection Manager–Select Network.........................................................28
Figure 3-21: Network Connected ................................................................................................28
Page vi
Page 7
IOVU-430S Panel PC
List of Tables
Table 1-1: IOVU-430S Specifications............................................................................................3
Table 1-2: Technical Specifications..............................................................................................9
Table 2-1: Package List Contents...............................................................................................12
Table 2-2: Optional Items.............................................................................................................13
Table 3-1: External Interface Connectors...................................................................................16
Table 3-2: 12 V–36 V Power Connector Pinouts........................................................................17
Table 3-3: GPIO and CAN Bus Connector Pinouts ...................................................................18
Table 3-4: RS-232/422/485 Pinouts .............................................................................................20
Table 3-5: USB Connector Pinouts.............................................................................................21
Table 3-6: Ethernet Connector Pinouts......................................................................................22
Table 3-7: Ethernet Connector LEDs..........................................................................................23
Page vii
Page 8
Page 9
IOVU-430S Panel PC
Chapter
1
1 Introduction
Page 1
Page 10
1.1 Overview
Figure 1-1: IOVU-430S
The IOVU-430S Panel PC comes with a 4.3" touch panel screen. It is powered by a
IOVU-430S Panel PC
Samsung ARM9 S3C2416 400 MHz processor and has 128 MB of DDR SDRAM and
128 MB of NAND flash.
The IOVU-430S is preinstalled with Windows Embedded CE 6.0 to provide rich application
development support. The package also includes a software development kit and
documentation to help easily customize the operating system according to needs.
The IOVU-430S is an extremely low power Panel PC. The system is fanless, which allows
quiet and reliable operation.
Connection to a variety of peripheral devices and networks is provided through a USB port,
a RS-232/422/485 serial port, and an Ethernet port. A CAN (Controller-Area Network)
bus connection allows the IOVU-430S to be used in a wide range of automotive and
industrial settings. The IOVU-430S also includes a microSD card slot for storage.
Page 2
Page 11
IOVU-430S Panel PC
1.2 Model Variations
The IOVU-430S is available in the following model variations.
Model No. Touch Panel Type Wi-Fi
IOVU-430S-CE6/ST/-R11 4-wire resistive type No
IOVU-430S-CE6/ST/WL/-R11 4-wire resistive type 802.11b/g
Table 1-1: IOVU-430S Specifications
1.3 Benefits
Some of the IOVU-430S benefits include:
Customizable operating system to suit application needs.
Less downtime from overheating because there are not fans to fail
Cost savings with low power consumption
Easy installation with a wide range of input voltages supported
Can handle tough environments because of solid-state storage and IP 64
1.4 Features
The IOVU-430S features are listed below:
Samsung ARM9 S3C2416 400 MHz processor
128 MB of DDR SDRAM and 128 MB of NAND flash memory
One Fast Ethernet port
One USB 1.1 port
One RS-232/422/485 serial communication connection
One GPIO and CAN bus connection
4-wire resistive type touch panel
12 V–36 V DC input
Windows Embedded CE 6.0 preinstalled
protection of the front cover
RoHS compliant
Page 3
Page 12
1.5 Front Panel
The IOVU-430S front panel (Figure 1-2) comprises a 4.3" TFT WQVGA color touch
screen LCD in an ABS+PC plastic frame.
IOVU-430S Panel PC
Figure 1-2: Front Panel
Page 4
Page 13
IOVU-430S Panel PC
1.6 Connector Panel
The external peripheral interface connectors are located on the bottom and side panels of
the IOVU-430S . The peripheral interface connectors are shown in Figure 1-3.
Figure 1-3: IOVU-430S Peripheral Connectors
External peripheral interface connectors on the IOVU-430S include:
1 x CAN bus connector
1 x DC power input terminal block
1 x GPIO connector
1 x RJ-45 LAN connector
1 x RS-232/422/485 connector
1 x microSD card slot
1 x USB 1.1 connector
Page 5
Page 14
1.7 Dimensions
The physical dimensions of the IOVU-430S are shown in Figure 1-4 and listed below:
Width: 145 mm
Height: 104 mm
Depth: 34 mm
IOVU-430S Panel PC
Page 6
Figure 1-4: IOVU-430S Physical Dimensions (millimeters)
Page 15
IOVU-430S Panel PC
1.8 Power Supply and Battery
WARNING:
Whenever you need to remove a part for maintenance or upgrading,
switch off the power supply and unplug the power cord first. And Risk
of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
The IOVU-430S has a terminal block connector on the bottom panel for DC power input.
Please see Section 3.3.1 for the conne
Figure 1-5: Power Input Connector
ctor pinouts.
Page 7
Page 16
1.9 Technical Specifications
The IOVU-430S technical specifications are listed in Table 1-2.
System Specifications
IOVU-430S Panel PC
CPU
Memory
Storage
OS
Real-time Clock
Watchdog Timer
Display
Display Type
Display Size
Resolution
LCD Colors
Brightness
Samsung ARM9 S3C2416 400 MHz processor
128 MB DDR SDRAM
128 MB NAND flash
One microSD card slot
Windows Embedded CE 6.0 preinstalled in NAND flash
Battery backup RTC
Software programmable supports 1–255 sec. system reset
TFT LCD screen
4.3"
480 x 272
262K
500 cd/m
2
Backlight MTBF
Pixel Pitch (mm)
Viewing Angle (H-V)
Touch Panel
I/O and Communications
Ethernet
CAN Bus
GPIO
USB Interface
Audio
Page 8
20,000 hrs
0.066(H) x 0.198(V)
140 / 120
4-wire resistive type touch panel
1 x 10/100 Mb/s
1 x 2-pin CAN bus terminal block (CAN specification 2.0b)
1 x 6-pin GPIO terminal block
1 x USB 1.1
2 x Speakers (1 Watt)
Page 17
IOVU-430S Panel PC
System Specifications
Serial Port
Power
Power Connector
Power Supply
Power Consumption
Environmental and Mechanical
Operating Temperature
Storage Temperature
Humidity
Vibration
1 x RS-232/422/485
(Selected by system software. See Section 3.3.3.2)
2-pin terminal block DC input
12 V–36 V DC
7 W
0ºC–50°C (32°F–122°F)
-10ºC–60°C (14°F–140°F)
5%–90%RH (non-condensing)
Operating Random Vibration Mode
1.Axes: 3 axes (Vertical / Transverse / Longitudinal).
2.10-500 Hz, 60min/axis.
3.Equivalent to Z:2.18 Grms X:1.6 Grms Y:1.96 Grms
Front Panel Color
Construction Material
Mounting
Physical Dimensions
Net Weight
Ingress Protection
Table 1-2: Technical Specifications
1.10 Certifications
All IOVU-430S series models comply with the following international standards:
RoHS
IP 64 compliant front panel
For a more detailed description of these standards, please refer to Appendix A.
Pantone Black C
ABS + PC Plastic
Wall, stand, V-Stand and arm (VESA 50 mm x 50 mm)
145 mm (W) x 104 mm (H) x 34 mm (D)
0.7 kg
IP 64 compliant front panel
Page 9
Page 18
IOVU-430S Panel PC
Chapter
2
2 Unpacking
Page 10
Page 19
IOVU-430S Panel PC
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the IOVU-430S and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-430S. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the IOVU-430S or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the IOVU-430S, place it on an
anti-static pad. This reduces the possibility of ESD damaging the IOVU-430S.
2.2 Unpacking Precautions
When the IOVU-430S is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.
Make sure the packing box is facing upwards so the IOVU-430S does not fall
out of the box.
Make sure all the components shown in Section 2.3 are present.
Page 11
Page 20
2.3 Unpacking Checklist
NOTE:
If some of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the IOVU-430S from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to sales@ieiworld.com.
The IOVU-430S is shipped with the following components:
Quantity Item and Part Number Image
IOVU-430S Panel PC
1 IOVU-430S
1 Null modem cable
1 Touch pen
1 Screws
1 Utility CD including SDK, utilities, and
technical documents
Table 2-1: Package List Contents
Page 12
Loading...