IEI Technology IMBA-BDE-1548-R10, IMBA-BDE-1518-R10 Quick Installation Manual

1

ATX motherboard supports 14nm Intel® Xeon® D1500 family, DDR4,

VGA, dual Intel® GbE/dual Intel® 10GbE, four USB 3.0,

six SATA 6Gb/s, RoHS

IMBA-BDE

Quick Installation Guide

Version 1.0

Apr 28, 2017

Package List

IMBA-BDE package includes the following items:

 1 x IMBA-BDE single board computer
 1 x I/O shielding
 2 x SATA cable
 1 x Utility CD
 1 x QIG
 1 x One Key Recovery CD

©2017 Copyright by IEI Integration corp.

All rights reserved.

2

Specifications

 CPU:

Intel® Xeon processor D-1500 product family

 BIOS:

AMI BIOS

 Memory:

Four 288-pin 2133 MHz dual-channel DDR4 SDRAM
unbuffered DIMMs support up to 128 GB

 Display Output:

1 x VGA (up to 1920x120 0@ 60 Hz)

 Ethernet:

LAN1: Intel® I210-AT PCIe controller
LAN2: Intel® I210-A T P CIe controller
LAN3&4: Inphi CS42 27 PHY (optional)

 External I/O Interfaces:

1 x KB/MS
1 x RS-232
2 x USB 2.0
4 x USB 3.0

 Internal I/O Interfaces:

1 x KB/MS (1x6 pin)
1 x USB 2.0 (180° Type-A)
4 x USB 2.0 (2x4 pin, P=2.54)
1 x RS-232/RS-422/4 85 ( 2x5 pin, P=2.54)
4 x RS-232 (2x5 pin, P=2.54)
6 x SATA 6Gb/s (RAI D 0/1/5/10 supported)

 Front Panel:

1 x Front panel (2x7 pin, power LED, HDD LED, speaker,
power button, reset butt on)

 LAN LED: 2 x LAN LED (1x2 pin)
 TPM:

1 x TPM (2x10 pin)

 SMBus: 1 x SMBus (1x4 pin)

3

 I²C: 1 x I²C (1x4 pin)
 Digital I/O: 8-bit digital I/O (2x5 pin)
 Expansion :

1 x 10GbE LAN card slot (white PCIe x 8 slot)
1 x M.2 connector (M key, 2242~2280, SATA & PCIe x2

signal)
1 x PCIe x4 Gen 2 (PCIE2x4_1)
5 x PCIe x4 Gen 3

 Watchdog Timer:

Software programm able supports 1~255 sec. system reset

 Fan Connector:

1 x CPU smart fan (1x4 pi n)
1 x System smart fan (1x 4 pin)

 Power supply:

ATX power supply , ATX / AT m ode support

 Power Consumption:

3.3V@0.11A, 5V@2.83A, 12V @ 3. 97A

(Intel® Xeon D-1548 2.0GHz CPU with 32GB (four 4 GB)
2133MHz DDR4 memory)

 Operating Temperat ur e: 0°C ~ 60°C
 Storage Temperatur e: -10°C ~ 70°C
 Operation Humidity: 5% ~ 95%, non-condensing
 Dimensions: 244m m x 305mm
 Weight: G W: 1200g / NW: 700g

4

Ordering Information



ATX motherboard supports 14nm Intel® Xeon® D-1548, DDR4,

IMBA-BDE-1548-R10:

VGA, dual Intel® GbE/dual 10GbE, four USB 3.0, six SATA 6Gb/s,
RoHS



ATX motherboard supports 14nm Intel® Xeon® D-1518, DDR4,

IMBA-BDE-1518-R10:

VGA, dual Intel® GbE/dual 10GbE, four USB 3.0, six SATA 6Gb/s,
RoHS



10 GbE LAN card, dual port support, RoHS

LAN-10G2F-PHY-CS4227:

 19800-000049-RS:


LPT flat cable, 240mm, P=2.54

19800-000075-RS:



PS/2 KB/MS cable with bracket, 220mm, P=2.0

Dual port USB cable with bracket, 300mm, P=2.54

19800-003100-100-RS:



RS-232 cable with bracket, Dual 10-pin to dual DB-9, 230mm,

19800-020100-100-RS:

P=2.54



SATA power cable, MOLEX 5264-4P to SATA15P

32102-000100-200-RS:

 32205-003800-300-RS:


RS-422/485 cable, 200mm, P=2.0

20-pin Infineon TPM module, software management tool, firmware

TPM-IN01-R20:

v3.17

5

Jumpers setting and connectors

LABEL FUNCTION

J_ATX_AT1 AT/ATX Mode Select Switch

JP2, JP3 Clear CMOS Button

CN4 CPU Fan Connector

12V_ATX1 +12V Power Connector

ATX1 ATX Power Connector

JDIMM1, JDIMM2,

JDIMM3, JDIMM4

DDR4 DIMM slots

DIO1 Digital Input / Output Connector

CN7 EC Debug Port Connector
JSPI1 SPI Programming Connector For System BIOS
JSPI2 SPI Programming Connector For EC
JSPI3 SPI Programming Connector For BMC

F_PANEL1 External Switches and Indicators Panel

COM3-6 Internal RS-232 Serial Port Connectors

COM2 Internal RS-422/485 Serial Port Connector

SATA0, SATA1, SATA2
SATA3, SATA4, SATA5

Serial ATA 3.0 Connectors

CN13 SMBUS Connector

J2 EC SMBUS Debug Connector

CN5 System Fan Connector
TPM1 For BIOS Bebug Only

USB1, USB2

Internal USB 2.0 Connectors

USB3

90 Degree USB 2.0 Connector

J1 8 Pin CPLD Flash Connector

COM1 External RS-232 Serial Port Connector

LAN1_USB1

RJ45 LAN and USB 3.0 Connectors

LAN2_USB2

RJ45 LAN and USB 2.0 Connectors

LAN3_USB3

USB 2.0 Connector

KBMS1

PS/2 Keyboard and Mouse Connector

VGA1 VGA Connectors

6

LAN1_USB1: Ethernet and USB 3.0 connectors

LAN1: RJ45 LAN connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 MD0+ 2 MD0­3 MD1+ 4 MD1­5 MD2+ 6 MD2­7 MD3+ 8 MD3-

9 VCC 10 GND
11 LINK_ACT+ 12 LINK_ACT­13 100- 14 1000­15 GND

USB1: External USB 3.0 connectors

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 VBUS 2 D1-

3 D1+ 4 GND1

5 STDA_SSRX1_N 6 STDA_SSRX1_P

7 GND_DRAIN 8 STDA_STX1_N

9 STDA_STX1_P

J_ATX_AT1: AT/ATX Power Mode Setting

PIN NO.

DESCRIPTION

Short A-B

ATX Power Mode (default)

Short B-C

AT Power Mode

JP2, JP3: Clear CMOS Setup

PIN NO.

DESCRIPTION

Short 1-2 (default)

Keep CMOS Setup

(Normal Operation)

Short 2-3 Clear CMOS Setup

7

KBMS1: PS/2 Keyboard and mouse connector
KBMS1 (Purple): 6-pin Mini-DIN keyboard connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 Keyboard Data 2 NC

3 GND 4 VCC

5 Keyboard Clock 6 NC

KBMS1 (Green): 6-pin Mini-DIN Mouse Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 Mouse Data 2 NC

3 GND 4 VCC

5 Mouse Clock 6 NC

LAN3_USB3: USB 2.0 Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 VBUS 2 D1-

3 D1+ 4 GND1

LAN2_USB2: RJ45 LAN and USB 2.0 Connector

LAN2: RJ45 LAN connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 MD0+ 2 MD0-

3 MD1+ 4 MD1-

5 MD2+ 6 MD2-

7 MD3+ 8 MD3-

9 VCC 10 GND
11 LINK_ACT+ 12 LINK_ACT­13 100- 14 1000­15 GND

USB2: External USB 2.0 connectors

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 VBUS 2 D1-

3 D1+ 4 GND1

8

VGA1: VGA connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1

RED

2

GREEN

3

BLUE

4

NC

5

GND

6

CRT_PLUG#

7

GND

8

GND

9

VCC

10

GND

11

NC

12

DDCDAT

13

HSYNC

14

VSYNC

15

DDCCLK

COM1: External RS-232 serial port connector

PIN NO.

DESCRIPTION

D1

DATA CARRIER DETECT

(DCD1)

D2

RECEIVE DATA

(RXD1)

D3

TRANSMIT DATA

(TXD1)

D4

DATA TERMINAL READY

(DTR1)

D5

GND

(GND1)

D6

DATA SET READY

(DSR1)

D7

REQUEST TO SEND

(RTS1)

D8

CLEAR TO SEND

(CTS1)

D9

RING INDICATOR

(RI1)

9

COM3-6: Internal RS-232 serial port connectors

Function PIN DESCRIPTION PIN DESCRIPTION

COM3

1 DCD 2 DSR
3 RXD 4 RST

5

TXD

6

CTS

7 DTR 8 RI

9

GND

10

GND

COM4

11

DCD

12

DSR

13

RXD

14

RST

15

TXD

16

CTS

17

DTR

18

RI

19

GND

20

GND

COM5

21

DCD

22

DSR

23

RXD

24

RST

25

TXD

26

CTS

27

DTR

28

RI

29

GND

30

GND

COM6

31

DCD

32

DSR

33

RXD

34

RST

35

TXD

36

CTS

37 DTR 38 RI
39 GND 40 GND

COM2: Internal RS422/485 Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 RXD485#

2

RXD485+

3 TXD485+

4

TXD485#

10

CN4&5:CPU & System Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1

GND

2

+V12S

3

Rotation Signal

4

PWM Control Signal

JSPI3: SPI Programming Connector For BMC

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1

+V3.3M_SPI_CON

2

SPI_CS

3

SPI_SO_SW

4

SPI_CLK_SW

5

SPI_SI_SW

6

GND

JSPI2: SPI Programming Connector For EC

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 +V3.3M_SPI_CON 2 SPI_CS

3

SPI_SO_SW

4

SPI_CLK_SW

5

SPI_SI_SW

6

GND

JSPI1: SPI Programming Connector For System BIOS

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1

+V3.3M_SPI_CON

2

SPI_CS

3

SPI_SO_SW

4

SPI_CLK_SW

5

SPI_SI_SW

6

GND

SATA0~5: Serial ATA 3.0 conn ecto rs

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 GND

5

RX-

2 TX+

6

RX+

3

TX-

7

GND

4

GND

8

N/C

11

ATX1: ATX Power Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1

+3.3V

13

+3.3V

2

+3.3V

14

-12V

3 GND 15 GND

4 +5V 16 PS_ON

5

GND

17

GND

6 +5V 18 GND

7 GND 19 GND

8

Power good

20

-5V

9 5VSB 21 +5V
10 +12V 22 +5V

11

+12V

23

+5V

12

+3.3V

24

GND

DIO1: Digital Input / Output Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1

GND

2

+V5S

3

DOUT4

4

DOUT3

5

DOUT2

6

DOUT1

7

DIN4

8

DIN3

9

DIN2

10

DIN1

F_PANEL1: External Switches and Indicator s Panel

PIN

DESCRIPTION

PIN

DESCRIPTION

PWR

LED

1

LED_PWR

2

BEEP_PWR

SPKR

3

NC

4

NC

5

GND

6

NC

PWR

BTN

7

PWR_BTN

8

PC_BEEP#

9

GND

10

NC

RESET

HDD

LED

11

SATA_LED+

12

RESET

13

SATA_LED-

14

GND

12

TPM1: For BIOS Bebug Only

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 LCLK 2 GND

3 LFRAME# 4 KEY

5

LRERST#

6

+5V

7 LAD3 8 LAD2

9 +3.3V 10 LAD1

11

LAD0

12

GND

13 SCL 14 SDA
15 SB3V 16 SERIRQ

17

GND

18

GLKRUN#

19

LPCPD#

20

LDRQ#

CN7: EC Debug Port Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 EC_EPP_STB# 2 EC_EPP_AFD#

3 EC_EPP_PD0 4 NC

5 EC_EPP_PD1 6 EC_EPP_INIT#

7 EC_EPP_PD2 8 EC_EPP_SLIN#

9 EC_EPP_PD3 10 GND
11 EC_EPP_PD4 12 NC
13 EC_EPP_PD5 14 EC_EPP_BUSY
15 EC_EPP_PD6 16 EC_EPP_KSI5
17 EC_EPP_PD7 18 EC_EPP_KSI4

12V_ATX1: +12V Power Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 GND 2 GND

3 +12V 4 +12V

13

J1: 8 Pin CPLD Flash Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 3.3V 2 CPLD_TDO
3 CPLD_TDI 4 NC
5 NC 6 CPLD_TMS
7 GND 8 CPLD_TCK

USB3: 90 Degree USB 2.0 Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 VCC 2 USB_DATA-

3 USB_DATA+ 4 GND

USB1, USB2: Internal USB 2.0 connectors

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 VCC 2 GND
3 USB_DATA- 4 USB_DATA+
5 USB_DATA+ 6 USB_DATA­7 GND 8 VCC

J2: EC SMBUS Debug Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 3.3V 2 EC_SMB_CLK

3 EC_SMB_DAT 4 GND

CN13: SMBus Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

1 GND 2 SMB_DATA

3 SMB_CLK 4 +5V

14

Board Layout: Jumper and Connector Locations

(Unit: mm)