Page 1
ATX Motherboard with Intel® Core™ 2 Duo, Pentium® D,
Pentium® 4, Celeron® D CPU FSB 533/800/1066MHz
IMBA-9454ISA
Quick Installation Guide
Version 1.0
Mar 26, 2008
Package Contents
IMBA-9454ISA package includes the following items:
z 1 x IMBA-9454ISA single board computer
z 1 x IDE Cable
z 2 x Dual RS-232 Cable
z 2 x SATA Cable
z 1 x SATA Power Cable
z 1 x I/O Shielding
z 1 x Mini Jumper Pack
z 1 x Utility CD
z 1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.
1
Page 2
2
Specifications
z ATX Motherboard with Intel® Core™ 2 Duo, Pentium® D,
Pentium® 4, Celeron® D CPU FSB 533/800/1066MHz
z System Chipset: Intel® 945G + ICH7
z BIOS : AMI BIOS Label
z System memory:
4 x 240-pin Dual channel DDR2 400/533/667MHz up to 4GB
z Ethernet: Dual Broadcom BCM5787M for PCIe GbE (LAN1 with
ASF2.0 remote control support)
z I/O Interface:
8 x USB 2.0
4 x SATA II
1 x LPT
1 x FDD
1 x CF Type II
5 x RS-232, 1 x RS-232/422/485
2 x PS/2 for KB / MS
1 x IDE
z Expansion
1 x PCIe x16
4 x PCI
1 x PCI/ISA
1 x ISA
z Digital I/O: 8 bit digital I/O, 4-bit input / 4-bit output
z TPM: 1 x TPM by pin header
z Super I/O: ITE IT8712F
z
Audio: Realtek ALC883 HD Audio codec
z
Display: VGA integrated in Intel® 945G
z
WDT: Software programmable 1-255 sec. System reset
z Power Supply: ATX support
z Power Consumption:
3.3V@6A , 5V@4.65A, 12V@4.15A, 5Vsb@ 0.42A
(Core™ 2 Duo E6700 2.66GHz/1066MHz CPU with 4GB DDR2 in
3DMark 2001)
Page 3
3.3V@6.17A ,5V@4.09A, 12V@10.23A, 5Vsb@ 0.59A
(Pentium® 4 3.73GHz/1066MHz CPU with 4GB DDR2 in 3DMark
2001 )
z Temperature: Operation: 0 ~ 60°C (32 ~ 140°F)
z Humidity: Operation: 5% ~ 95% non-condensing
z Dimension: 305 mm x 244 mm
z Weight: GW: 1200g; NW: 650g
Ordering Information
IMBA-9454ISA-R10
ATX Motherboard with Intel® Core™ 2 Duo, Pentium® D,
Pentium® 4, Celeron® D CPU FSB 533/800/1066MHz
CB-USB02-RS: Dual USB Cable
CB-USB14-RS: Four USB Cable
32200-000017-RS: FDD Cable
32200-000063-RS: RS-232/422/485 Cable
CF-520-RS: CPU Cooler
CF-775A-RS: CPU Cooler
TPM-WI01-R10: 20-pin WINBOND TPM Modules, S/W Managem ent Tool
TPM-IN01-R10: 20-pin INFINEON TPM Modules, S/W Management Tool
SDVO-100VGA-R10: PCIe x 16 VGA Output SDVO Card supports dual
display (IEI CPU board only)
SDVO-100DVI-R10: PCIe x 16 DVI Output SDVO Card supports dual
display (IEI CPU board only)
Jumpers setting and Connectors
3
JP1: Clear CMOS Setup
PIN Description
1-2
(Default)
Normal Operation
2-3 Clear CMOS Setup
JP2 : CF Master/Slave Selection
PIN Description
Open
(Default)
Slave
Short Master
Page 4
JP3 : AT/ATX Power Selection
PIN Description
1-2
(Default)
ATX
2-3 AT
CN1：COM2 RS422/485 Select (2.54mm)
PIN Description
1 TXD1+
2 TXD13 RXD1+
4 RXD1-
CN2：2x7 Front Panel Connector (2.54mm)
Function PIN Description Function PIN Description
1 LED+ 2 BEEP_PWR
3 NC 4 NC
POWER
LED
5 LED- 6 NC
7 POWER BUTTON
BUZZER
8 PC_BEEP POWER
BUTTON
9 GND 10 NC
11 IDE LED+ 12 RESET HDD
LED
13 IDE LED -
RESET
14 GND
CN3: Front Panel Audio Connector (2.54mm)
PIN Description PIN Description
1 MIC IN 2 GND AUDIO
3 MIC BIAS 4 5V
5 LINE OUT(R) 6 LINE OUT(R) Return
7 NC 8 NC
9 LINE OUT(L) 10 LINE OUT(L) Return
JP4 : COM2 Mode Selection
PIN Description
1-2
(Default)
RS-232
2-3 RS-422/RS-485
CN4: 2x4 Pin Audio Connector (2.54mm)
PIN Description PIN Description
1
SUROUT_L
2
CENOUT
3
GND AUDIO
4
GND AUDIO
5
SUROUT_R
6
LFEOUT
7
GND AUDIO
8
NC
4
Page 5
5
COM2: Serial Port 2 x 7 Pin Box Header Connector
PIN Description PIN Description
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC
11 TX+ 12 TX13 RX+ 14 RX-
COM3~6: Serial Port 2 x 5 Box Header Connector
PIN Description PIN Description
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC
USB3/USB4：2x4 Pin USB Connector (2.54mm)
PIN Description PIN Description
1 VCC 2 GND
3 USBP0- 4 USBP1+
5 USBP0+ 6 USBP2+
7 GND 8 VCC
CPU12V1：CPU Power Connector
PIN Description PIN Description
1 GND 2 GND
3 +12V 4 +12V
CN5: SPDIF Connector
PIN Description
1 +5V
2 NC
3 SPDIF OUT
4 GND
5 SPDIF IN
Page 6
FAN2, FAN3 : SYSTEM Fan
Connector
PIN Description
1
GND
2
+12V (Control)
3
Rotation Signal
FAN1 : CPU Fan Connector
PIN Description
1
GND
2
+12V
3
Rotation Signal
4
Control
DIO1: 2x5 Pin Digital Input / Output Connector (2.54mm)
PIN Description PIN Description
1 GND 2 +5V
3 Output0 4 Output1
5 Output2 6 Output3
7 Input0 8 Input1
9 Input2 10 Input3
TPM1: 2x 10 Pin TPM Connector (2.54mm)
PIN Description PIN Description
1 Clock 2 GND
3 Frame 4 KEY
5 Reset 6 +5V
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SCL 14 SDA
15 +3.3V SBY 16 Serial IRQ
17 GND 18 NC
19 Power Down# 20 DRQ
AUX1：Audio AUX IN (2.54mm)
PIN Description
1
AUX IN_L
2
GND
3
GND
4
AUX IN_R
CD_IN1：Audio CD IN (2.54mm)
PIN Description
1
CD IN_L
2
GND
3
GND
4
CD IN_R
6
Page 7
Board Layout: Jumper and Connector Locations
7
Page 8
8
Loading...