Page 1
1
ATX Form Factor with Intel® Core 2 Duo, Pentium®
D/Pentium® 4/Celeron® D CPU FSB 533/800/1066MHz,
VGA, Dual Channel DDR2, FDD, LPT, 4 x SATA II,8 x USB2.0
and 6 x COM
IMBA-9454
Quick Installation Guide
Version 1.0
Feb 27, 2007
Package Contents
IMBA-9454 package includes the following items:
1 x IMBA-9454 single board computer
1 x IDE Cable
2 x SATA Cable
1 x SATA Power Cable
2 x Dual RS-232 Cable
1 x I/O Shielding
1 x mini jumper pack
1 x Utility CD
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.
Page 2
2
Specifications
CPU: LGA 775 Intel® Core 2 Duo, Pentium® 4/ Celeron® D
processor, FSB 533/800/1066MHz
System Chipset: Intel® 945G + ICH7
BIOS : AMI BIOS Label
System memory:
4 x 240-pin Dual channel DDR2 400/533/667MHz up to 4GB
Ethernet: Dual Broadcom BCM5787M for PCI express GbE (LAN1
with ASF2.0 remote control support)
I/O Interface:
8 x USB 2.0
4 x SATA II
1 x LPT
1 x FDD
1 x CF Type II
5 x RS-232, 1 x RS-232/422/485
1 x 20-pin LPC for TPM modules support
2 x PS/2 for KB / MS
1x IDE
Expansion1 x PCI-E*16 (Support PCIe x 1/2/4/8/16 PCIe add-on
cards)
6 x PCI
Digital I/O: 8 bit digital I/O, 4-bit input / 4-bit output
IrDA: 1 x IrDA by pin header
Super I/O: IT8712F
Audio: Realtek ALC655 AC'97 codec
Display: VGA integrated in Intel® 945G
WDT: Software programmable 1-255 sec. System reset
Power Supply: ATX support
Power Consumption:
5V@4.25A, 12V@10.17A, 3.3V@ 6.07A
(Pentium 4 3.73GHz/1066 MHz CPU with 1GB DDR2 667MHz)
Temperature: Operation: 0 ~ 60° C (32 ~ 140° F)
Humidity: Operation: 5% ~ 95% non-condensing
Dimension: 305(L) mm x 244(W) mm
Weight: GW: 1200g; NW: 650g
Page 3
3
Ordering Information
IMBA-9454G-R10
ATX Motherboard with Intel® LGA 775, Core 2 Duo, Pentium® D/
Pentium® 4/ Celeron® D processor FSB 533/800/1066MHz, PCIe GbE,
SATA II and Audio
32200-000017-RS:
FDD Cable
CB-USB02-RS:
Dual USB Cable
CB-USB14-RS:
Four USB Cable
CF-520-RS:
CPU Cooler
CF-775A-RS:
CPU Cooler
TPM-SI01-R10:
20-pin SINOSUN TPM Module, S/W Management Tool
TPM-WI01-R10:
20-pin WINBOND TPM Module, S/W Management Tool
TPM-IN01-R10: 20-pin INFINEON TPM Module, S/W Management Tool
SDVO-100VGA-R10:
PCIe x 16 VGA Output SDVO Card supports dual
display (IEI CPU board only)
SDVO-100DVI-R10:
PCIe x 16 DVI Output SDVO Card supports dual
display (IEI CPU board only)
Jumpers setting and Connectors
JP1: Clear CMOS Setup
PIN Description
1-2 Normal Operation
2-3 Clear CMOS Setup
JP4 : COM2 Mode Selection
PIN Description
1-3 RS-232
3-5 RS-422/RS-485
CN1: RS422/485 1 x 4 Pin
Header Connector
PIN Description
1 TXD1+
2 TXD13 RXD1+
4 RXD1-
IR1: IrDA Connector
PIN Description
1 +5V
2 NC
3 IR-RX
4 GND
5 IR-TX
JP2 : CF Master/Slave Selection
JP2 Description
Open Slave
Short Master
Page 4
4
CN2: Multi Panel
PIN Description PIN Description
1
ACPILED+
2 SPEAKER+
3 N/C 4 N/C
5 ACPILED- 6 N/C
7 ATX POWER BUTTON 8 SPEAKER-
9 GND 10 N/C
11 IDE LED+ 12 RESET SW
13 IDE LED - 14 GND
CN5: SPDIF Connector (2.54mm)
PIN Description PIN Description
1 VCC AUDIO 2 NC
3 SPDIF OUT 4 GND AUDIO
5 SPDIF IN
CN4: Audio Connector (2.54mm)
PIN Description PIN Description
1 SUROUT_L 2 CENOUT
3 GND AUDIO 4 GND AUDIO
5 SUROUT_R 6 LFEOUT
7 GND AUDIO 8 NC
CN3: Front Panel Audio Connector (2.54mm)
PIN Description PIN Description
1 MIC IN 2 GND AUDIO
3 MIC BIAS 4 5V
5 LINE OUT(R) 6 LINE OUT(R) Return
7 NC 8 NC
9 LINE OUT(L) 10 LINE OUT(L) Return
CD_IN1: Audio CD IN (2.54mm)
PIN Description PIN Description
1 CD IN_L 2 GND
3 GND 4 CD IN_R
Page 5
5
AUX1: Audio AUX IN (2.54mm)
PIN Description PIN Description
1 AUX IN_L 2 GND
3 GND 4 AUX IN_R
FAN1: CPU Fan Connector
PIN Description
1
GND
2
+12V
3
Linear control
4
Fan Sensor
FAN2~3: CPU Fan Connector
PIN Description
1
GND
2
Linear control
3
Fan Sensor
IDE1 (Blue): IDE Interface Connector
PIN Description PIN Description
1 RESET# 2 GND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GND 20 N/C
21 IDE DRQ 22 GND
23 IOW# 24 GND
25 IOR# 26 GND
27 IDE CHRDY 28 GND
29 IDE DACK 30 GND
31 INTERRUPT 32 N/C
33 SA 1 34 N/C
35 SA 0 36 SA 2
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GND
Page 6
6
COM3~6: Serial Port 2 x 5 Box Header Connector
PIN Description PIN Description
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC
USB3,USB4: 8-PIN Header USB Connectors
PIN Description
1 8 VCC
3 6 USBD5 4 USBD+
7 2 GND
COM2: Serial Port 2 x 7 Pin Header Connector
PIN Description PIN Description
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC
11 TXD1+ 12 TXD113 RXD1+ 14 RXD1-
DIO1: Digital Input / Output
PIN Description PIN Description
1 GND 2 +5V
3 Output0 4 Output1
5 Output2 6 Output3
7 Input0 8 Input1
9 Input2 10 Input3
Page 7
7
Board Layout: Jumper and Connector Locations
Page 8
8
Loading...