CPU: Intel® Atom™ Processor N270 1.6GHz with a 533MHz FSB
System Chipset: Intel® 945GSE + ICH7M
BIOS: AMI Flash BIOS
System memory:
One 200-pin 533/400MHz DDR2 SDRAM SO-DIMM supported
(system max. 2GB)
Ethernet: One Intel® 82541PI GbE Chipset
I/O Interface:
2 x SATA (Signal to Base Board)
8 x USB 2.0 (Signal to Base Board)
1 x IDE channel (Signal to Base Board)
Expansions:
4 x PCIe x1 (Signal to Base Board)
4 x PCI, 32 bit / 33 MHz PCI bus (Signal to Base Board)
Display Interface:
VGA/HDTV Integrated in Intel 945GSE Signal (to Base Board)
18-bit Dual-Channel LVDS Signal (to Base Board)
SDVO Interface (Only SDVO Port_B)
Audio:
HD/AC’97 Audio Signal to Base Board (Audio Codec on Base
Board)
Watchdog timer:
Software programmable supports 1~255 sec. system reset (Depend
on Super I/O of Base Board)
HW monitor: By NUVOTON;NCT7802Y
Power Supply: AT/ATX support
Power Consumption:
12V@0.95A (Intel® Atom™ N270 1.6GHz with 1GB DDR2 DRAM)
Humidity: Operation: 5% ~ 95% , non-condensing
Temperature: 0 ~ 60°C(32 ~ 140°F)
Dimension: 125 mm x 95 mm
Weight: GW: 700g; NW: 250g
Page 3
3
SW1
:
LVDS Panel ID setting
1 2 3 4
OFF
OFF
OFF
OFF
640X480
(18-bit)
800X480
(18-bit)
OFF
ON
OFF
OFF
800X600
(18-bit)
ON ON
OFF
OFF
1024X768
(18-bit)
OFF
OFF
ON
OFF
1280X1024
(36-bit)
ON OFF
ON
OFF
1400X1050
(36-bit)
OFF
ON
ON
OFF
1400X900
(36-bit)
ON ON
ON
OFF
1600X1200
(36-bit)
SW2
: BOOT BIOS
SPI(default)
OFF
ON
OFF
OFF
LPC
ON
OFF
OFF
OFF
PCI
OFF
OFF
OFF
OFF
Table of Connectors
LABEL
FUNCTION
J1
SPI1
Program SPI connector
DIMM1
DDR2 SO
-
DIMM
Socket
Ordering Information
ICE-945GSE-N270-R11: COM Express Basic type 2 Module with Intel®
Atom™ N270 1.6GHz, VGA/LVDS, GbE, USB, SATA and Audio
ICE-945GSE-N270W-R11: COM Express Basic type 2 Module with Intel®
Atom™ N270 1.6GHz, VGA/LVDS, GbE, USB, SATA and Audio, -20~70C
ICE-945GSE-N270W2-R11: COM Express Basic type 2 Module with Intel®
Atom™ N270 1.6GHz, VGA/LVDS, GbE, USB, SATA and Audio, -40~85C
ICE-DB-9S-R10: Base Board for COM Express Type 2 modules