IEI Technology HPCIE-Q170 Quick Installation Manual

1

Half-size PICMG 1.3 CPU Card supports LGA1151 Intel®
Core™ i7/i5/i3/Pentium®/Celeron® CPU, Intel® Q170,

DDR4, VGA, iDP, Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s,

PCIe Mini, mSATA, HD Audio, Intel® AMT and RoHS

HPCIE-Q170

Quick Installation Guide

Version 1.0

November 9, 2015

Package Contents

HPCIE-Q170 package includes the following items:

 1 x HPCIE-Q170 single board computer
 1 x SATA cable
 1 x Utility CD
 1 x QIG (Quick Installation Guide)

©2015 Copyright by IEI Integration Corp.

All rights reserved.

2

Specifications

 CPU: 6th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or

Celeron® processor

 PCH: Intel® Q170
 BIOS: UEFI BIOS
 Memory: two 260-pin 1600/2133 MHz dual-channel non-ECC

unbuffered DDR4 SO-DIMM (system max. 32 GB)

 Graphics: 9th generation Intel® HD Graphics, supporting DX11/12,

OpenCL 2.x and OpenGL 4.3/4.4 decode/encode for HEVC, VP8, VP9,
VDENC

 Display Output:

1 x VGA (via Chrontel CH7517A, up to 1920x1200 @ 60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @
60Hz)

 Ethernet:

LAN1: Intel® I219-LM with Intel® AMT 10.0 support
LAN2: Intel® I211 PCIe controller

 Super I/O: Fintek F81866D
 Embedded Controller: ITE IT8587VG
 External I/O Interface

2 x RJ-45 GbE
2 x USB 3.0
1 x VGA

 Internal I/O Interface

4 x USB 2.0 (1x4 pin, p=2.0)
2 x RS-232/422/485 (2x5 pin, p=2.0)
1 x iDP (1x4 pin, p=2.0)
1 x KB/MS (1x6 pin)

 Storage:

2 x SATA 6G/s (Q170 supports RAID 0, 1)
1 x PCIe Mini supports mSATA & USB 2.0 mSATA

3

 Expansion:

16 lanes PCIe signal from CPU via golden finger
(support x16 or x8 + x8 or x4 + x4 + x8)
4 lanes PCIe signal from Q170 via golden finger

 Audio: supports 7.1 channel HD Audio by IEI AC-KIT-892HD kit
 Front Panel

1 x Front panel connector supports power LED, HDD LED, speaker,
power button and reset button

 SMBus: one SMBus (1x4 pin)
 I

2

C: one I2C (1x4 pin)

 LAN LED: two LAN LED connectors (1x2 pin)
 Digital I/O: one 8-bit digital I/O (2x5 pin)
 Fan Connector

1 x Smart fan connector (1x4 pin)

 Watchdog Timer: Software programmable supports 1~255 sec. system

reset

 Power Supply

5V or 12 V DC input
Support AT/ATX mode

 Operating Temperature: -20°C ~ 60°C
 Humidity: 10% ~95%, non-condensing
 Dimensions: 169 mm x 126 mm
 Weight:

GW:1000g
NW:420g

Ordering Information

 HPCIE-Q170-R10:

Half-size PICMG 1.3 CPU Card supports LGA1151 Intel® Core™
i7/i5/i3/Pentium®/Celeron® CPU, Intel® Q170, DDR4, VGA, iDP, Dual

4

Intel® PCIe GbE, USB 3.0, SATA 6Gb/s, PCIe Mini, mSATA, HD Audio,
Intel® AMT and RoHS

 19800-000075-RS:

KB/MS cable with bracket

 32102-000100-200-RS:

SATA power cable

 32200-015100-RS:

LPT cable

 32200-074800-RS:

RS-422/485 cable, 200mm

 AC-KIT-892HD-R10:

7.1 channel HD Audio kit with Realtek ALC892

support dual audio streams

 CF-1150SA-R10:

special cooler kit for LGA1150, high-performance

compatible, 95W

 CF-1150SB-R10:

special cooler kit for LGA1150, High-perfo rmance

compatible, 65W

 CF-1150SC-R20:

special cooler kit for LGA1150, 1U chassis

compatible, 65W

 CF-1150SE-R10:

special cooler kit for LGA1150, 1U chassis

compatible, 95W

 CF-1150SF-R10:

special cooler kit for LGA1150, 1U chassis

compatible, 54W

 DP-DP-R10:

DisplayPort to DisplayPort converter board (for IEI IDP

connector)

 DP-DVI-R10:

DisplayPort to DVI-D converter board (for IEI IDP

connector)

 DP-HDMI-R10:

DisplayPort to HDMI converter board (for IEI IDP

connector)

 DP-LVDS-R10:

DisplayPort to LVDS converter board (for IEI IDP

connector)

 DP-VGA-R10:

DisplayPort to VGA converter board (for IEI IDP

connector)

 SAIDE-KIT01-R10:

SATA to IDE/CF converter board

5

Jumpers and Connectors

LABEL FUNCTION

J_ATX_AT1

AT/ATX mode select switch

J_CMOS1

Clear CMOS button

SW_BIOS1_1

BIOS setting jumper

COM1, COM2

Internal serial ports, RS-232/422/485

F_PANEL1

Front panel pin header

USB1, USB2

Internal USB 2.0 ports

CN1, CN2

External USB 3.0 ports

DIO1

8-bit digital I/O connector

JSPI1

BIOS SPI ROM programming connector

CPU_FAN1

CPU smart fan connector

LED_LAN1, LED_LAN2

LAN link LED connector

KB_MS1

Keyboard & mouse pin header

CPU12V1

+12V DC power input connector

SMB1

SMBus connector

I2C1

I

2

C connector

DP1

Internal display port connector

S_ATA1, S_ATA2

SATA 6Gb/s drive connectors

VGA1

External VGA connector

J_AUDIO1

Audio pin header

MPCIE1

mSATA module slot

LAN1, LAN2

RJ-45 GbE connectors

SW_BIOS1_1: BIOS Setting

PIN NO. DESCRIPTION

Short 1-2 BIOS1 (Default)
Short 2-3 BIOS2

6

USB SW1: External USB (CN1 & CN2) Power Setting BIOS Option

BIOS Option DESCRIPTION

+5V DUAL (default)

Set the power source to +5V DUAL for the

external USB ports (CN1 & CN2)

+5V

Set the power source to +5V for the

external USB ports (CN1 & CN2)

USB SW2: Internal USB (USB1 & USB2) Power Setting BIOS Option

BIOS Option DESCRIPTION

+5V DUAL (default)

Set the power source to +5V DUAL for the

internal USB ports (USB1 & USB2)

+5V

Set the power source to +5V for the

internal USB ports (USB1 & USB2)

Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.

Chipset

Auto Power Button Status [Disabled(ATX)]

Restore AC Power Loss [Last State]

> PCI Express Configuration
> PCI Azalia Configuration

USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]

------------------

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

J_ATX_AT1: AT/ATX Mode Select Switch

PIN NO. DESCRIPTION

Short 1 - 2 ATX Mode (default)
Short 2 - 3 AT Mode

J_CMOS1: Clear CMOS Button

PIN NO. DESCRIPTION

Open Normal Operation (Default)

Push Clear CMOS

7

J_FLASH1: Flash Descriptor Security Override Jumper

PIN NO. DESCRIPTION

Short 1 - 2 No override
Short 2 - 3 override

CHASSIS1: Chassis Intrusion Jumper

PIN NO. DESCRIPTION

Open Chassis close (default)
Short Chassis open

F_PANEL1: Front Panel Pin Header

PIN DESCRIPTION PIN DESCRIPTION

1 NC 6 PWR_LED+

2 PWRBTSW# 7 PWR_LED+

Power

Button

3 GND

Power

LED

8 GND

4 +V5S 9 RESET+

HDD

LED

5 HDD_LED-

Reset

10 GND

COM1, COM2: RS-232/422/485 Internal Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 DCD 2 DSR
3 SIN 4 RTS
5 SOUT 6 CTS
7 DTR 8 RI
9 GND 10 GND

8

CPU_FAN1: CPU Smart Fan Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GND 3 FANIO
2 +12V 4 PWM

JSPI1: BIOS SPI ROM Programming Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 +V3.3M_SPI_CON 4 SPI_CLK_SW
2 SPI_CS 5 SPI_SI_SW
3 SPI_SO_SW 6 GND

DIO1: Digital I/O Pin Header

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GND 2 VCC
3 DOUT3 4 DOUT2
5 DOUT1 6 DOUT0
7 DIN3 8 DIN2
9 DIN1 10 DIN0

CN1, CN2: External USB 3.0 Port

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 VBUS 2 D­3 D+ 4 GND
5 STDA_SSRX_N 6 STDA_SSRX_P
7 GND 8 STDA_SSTX_N
9 STDA_SSTX_P

USB1, USB2: USB 2.0 Port Pin Header

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 VCC 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA­7 GND 8 VCC

9

I2C1: I2C Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GND 3

PCH_GP39

(I2C_CLK)

2

PCH_GP38

(I2C_DAT)

4 +5V

SMB1: SMBus Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GND 3 SMBCLK
2 SMBDATA 4 +5V

CPU12V1: +12V DC Power Input Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 GND 2 GND
3 +12V 4 +12V

KB_MS1: Keyboard & Mouse Pin Header

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 VCC 4 KBDATA
2 MSDATA 5 KBCLK
3 MSCLK 6 GND

LED_LAN2: LAN2 LED Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 +3.3VLAN 2 LAN2_LINK_ACT-

LED_LAN1: LAN1 LED Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 +3.3VLAN 2 LAN1_LINK_ACT-

10

J_AUDIO1：Audio Kit Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 HDA_SYNC 2 HDA_BIT_CLK
3 HDA_SDOUT 4 HDA_SPKR
5 HDA_SDIN 6 HDA_RST#
7 HDA_VCC 8 HDA_GND
9 HDA_+12V 10 HDA_GND

S_ATA1, S_ATA2: SATA 6Gb/s Drive Connectors

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1

GND

2

SATA_TX+

3

SATA_TX-

4

GND

5

SATA_RX+

6

SATA_RX-

7

GND

DP1: Internal Display Port Pin Header

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 HPD 2 AUXP
3 GND 4 AUXN
5 AUX_CTRL_DET_D 6 GND
7 GND 8 LANE2P

9 LANE3P 10 LANE2N
11 LANE3N 12 GND
13 GND 14 LANE0P
15 LANE1P 16 LANE0N
17 LANE1N 18 +3.3V
19 +5V 20 NC

11

MPCIE1: mSATA Slot

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 PCIE_WAKE# 2 +3.3V

3 N/C 4 GND

5 N/C 6 1.5V

7 N/C 8 N/C

9 GND 10 N/C
11 MSATA_CLK# 12 N/C
13 MSATA _CLK 14 N/C
15 GND 16 N/C
17 PLTRST_N 18 GND
19 N/C 20 +3.3V
21 GND 22 PLTRST_N
23 SATA_RX+ 24 +3.3V
25 SATA_RX- 26 GND
27 GND 28 1.5V
29 GND 30 SMB_CLK
31 SATA_TX- 32 SMB_DATA
33 SATA_TX+ 34 GND
35 GND 36 USB_DATA­37 GND 38 USB_DATA+
39 +3.3V 40 GND
41 +3.3V 42 N/C
43 +3.3V 44 N/C
45 CLINK_CLK 46 N/C
47 CLINK_DATA 48 1.5V
49 CLINK_RST# 50 GND
51 MSATA_DET 52 +3.3V

12

Board Layout: Jumper and Connector Locations

13

(Unit: mm)