V
HDC-301MS Video Capture Card
MODEL:
HDC-301MS-R10
ideo/Audio Capture Card with
HDMI Input Channel,1920x1080@30p,
and H.264 Hardware Encoder
User Manual
Rev. 1.00 – September 4, 2015
Page I
Date Version Changes
September 4, 2015 1.00 Initial release
HDC-301MS Video Capture Card
Revision
Page II
HDC-301MS Video Capture Card
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page III
HDC-301MS Video Capture Card
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any
directions or instructions contained therein can help avoid making
mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.
Page IV
HDC-301MS Video Capture Card
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 FEATURES................................................................................................................... 2
1.3 APPLICATIONS ............................................................................................................ 3
1.4 CONNECTOR OVERVIEW............................................................................................. 3
1.5 SPECIFICATIONS ......................................................................................................... 4
1.6 DIMENSIONS............................................................................................................... 6
2 HARDWARE INSTALLATION................................................................................... 7
2.1 UNPACKING................................................................................................................ 8
2.1.1 Anti-static Precautions....................................................................................... 8
2.1.2 Unpacking Precautions...................................................................................... 8
2.1.3 Unpacking Checklist.......................................................................................... 9
2.2 HARDWARE INSTALLATION....................................................................................... 10
2.2.1 HDMI Input Connector (JR1)...........................................................................11
3 DRIVER INSTALLATION (WINDOWS)................................................................ 12
3.1 OVERVIEW................................................................................................................ 13
3.2 DRIVER INSTALLATION............................................................................................. 13
UNINSTALL DRIVER.................................................................................................. 16
3.3
4 IEI HD CAPTURE AP (WINDOWS) ..................................................................... 17
4.1
SOFTWARE INSTALLATION (WINDOWS).................................................................... 18
4.1.1 System Requirements........................................................................................ 18
4.1.2 IEI HD Capture AP Installation....................................................................... 18
4.2 USING IEI HD CAPTURE APPLICATION..................................................................... 21
4.3 UNINSTALL IEI HD CAPTURE AP............................................................................. 24
5 FAQ ............................................................................................................................... 25
A REGULATORY COMPLIANCE.............................................................................. 27
B HAZARDOUS MATERIALS DISCLOSURE ......................................................... 29
Page V
HAZARDOUS MATERIAL DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
B.1
HDC-301MS Video Capture Card
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ....................................... 30
Page VI
HDC-301MS Video Capture Card
List of Figures
Figure 1-1: HDC-301MS Video Capture Card...............................................................................2
Figure 1-2: HDC-301MS Connector Overview..............................................................................3
Figure 1-3: HDC-301MS Dimensions (mm) ..................................................................................6
Figure 2-1: HDC-301MS Installation............................................................................................10
Figure 2-2: HDC-304E HDMI Output Kit Connector Location...................................................11
Figure 3-1: Device Driver Installation Wizard Welcome Window ............................................14
Figure 3-2: Windows Security Window ......................................................................................14
Figure 3-3: Driver Installing.........................................................................................................15
Figure 3-4: Driver Installation Complete ....................................................................................15
Figure 3-5: Device Manager.........................................................................................................16
Figure 4-1: IEI HD Capture Full x86 Setup Wizard Welcome Window.....................................19
Figure 4-2: Select Installation Folder..........................................................................................19
Figure 4-3: Confirm Installation ..................................................................................................20
Figure 4-4: Installing IEI HD Capture AP....................................................................................20
Figure 4-5: Installation Complete................................................................................................21
Figure 4-6: IEI HD Capture AP.....................................................................................................22
Figure 4-7: Encode Setting..........................................................................................................23
Figure 4-8: IEI HD Capture AP – Stop Button ............................................................................24
Page VII
HDC-301MS Video Capture Card
List of Tables
Table 1-1: Specifications ...............................................................................................................6
Table 2-1: Package List Contents.................................................................................................9
Table 2-2: HDMI Input Connector Pinouts .................................................................................11
Page VIII
HDC-301MS Video Capture Card
Chapter
1
1 Introduction
Page 1
1.1 Overview
Figure 1-1: HDC-301MS Video Capture Card
HDC-301MS Video Capture Card
The low power HDC-301MS video capture card supports 1080p Full HD video via HDMI
connection. The HDC-301MS video capture card is equipped with the high-performing
encoder component with the HDMI video input channel and either audio input channel.
A software development kit (SDK) is shipped with each card and the flexible system
architecture simplifies the integration of cameras, video signal processing, storage and
video management and or security applications.
1.2 Features
Some of the HDC-301MS video capture card features are listed below.
Encoding up to 1920x1080@30p
HDMI input channel with 1920x1080@60p
Pass through for transmitting uncompressed video up to 1080p resolution.
Capture or record HD video in H.264 format
Reduce the amount of hard disk space needed by real-time H.264 recording
Page 2
compression capability
Low power consumption
Software development kit (SDK)
HDC-301MS Video Capture Card
1.3 Applications
Some possible applications include:
Video game
DVD/Blue-ray player,
Camcorder
Video surveillance
Video analyzer
Video post production
1.4 Connector Overview
NOTE:
The other connectors, jumpers and interfaces on the board not
specified below are for R&D diagnostic purposes and should not be
used by the end user.
The HDC-301MS comes with one HDMI input connector. A PCIe Mini edge connector on
the bottom of the capture card enables the HDC-301MS to interface with a motherboard.
Figure 1-2: HDC-301MS Connector Overview
Page 3
1.5 Specifications
The HDC-301MS specifications are listed in the table below:
HDC-301MS Video Capture Card
Video Input Channel
Video Input Type
Audio Input Channel
Audio Input Type
PC Interface
VIDEO PROCESSING
Video Compression
Recording Bitrate
HDC-301MS
One
HDMI
One
HDMI
PCIe Mini
H.264/AVC High Profile Level 4.1 (hardware
compression)
Up to 30 Mbps
1920x1080 24p/25p/30p/50p/59.94p/60p
1920x1080 59.94i
1680x1050 60p
1440x900 60p
1360x768 50p
Page 4
1280x1024 60p
1280x800 60p
Input Resolution
1280x768 60p
1280x720 50p/59.94/60p
1024x768 60p
800x600 60p
720x576 50p
720x480 59.94p/60p
640x480 60p
HDC-301MS Video Capture Card
Recording Resolution
AUDIO PROCESSING
Sampling Frequencies
Audio Compression
HDC-301MS
1920 x 1080 24p/25p/30p
1440 x 900 30p
1360 x 768 50p
1280 x 1024 30p
1280 x 800 60p
1280 x 768 60p
1280 x 720 50p/60p
1024 x 768 60p
800 x 600 60p
720 x 576 50p
720 x 480 60p
640 x 480 60p
44.1 k, 48 kHz
MPEG-4 AAC
Recording Bitrate
FUNCTIONALITY
Multiple Card Support
Scaling
SYSTEM REQUIREMENTS
System
Memory
OS Environment
SOFTWARE SUPPORT
Device Driver
128 kbps
4 cards
Video scaling down compression
Intel® Core Duo 2.4 GHz or above
2 GB or more
Windows:
Microsoft Windows 7 32-bit/64-bit
Microsoft DirectX 10.0c (32-bit)
Linux:
Ubuntu 10.04 (Kernel version 2.6.35)
Driver for Windows 7 (32-bit/64-bit) and
Linux Ubuntu 10.04 (Kernel version 2.6.35)
Page 5
HDC-301MS Video Capture Card
SDK
OTHERS
Dimensions (WxH)
Operating Temperature
Power Consumption
Table 1-1: Specifications
1.6 Dimensions
The dimensions for the HDC-301MS are listed below.
HDC-301MS
SDK provided with demo program
51 mm x 30 mm
0ºC–60ºC (32ºF–140ºF), non-condensing
3 W
Page 6
Figure 1-3: HDC-301MS Dimensions (mm)
HDC-301MS Video Capture Card
2 Hardware Installation
Chapter
2
Page 7
2.1 Unpacking
2.1.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the video
capture card may result in permanent damage to the capture card and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the video capture card. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the video capture card, or any other electrical component
is handled, the following anti-static precautions are strictly adhered to.
HDC-301MS Video Capture Card
Wear an anti-static wristband: Wearing a simple an ti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the video capture card, place it on
an anti-static pad. This red uces the possibility of ESD damaging the video
capture card.
Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.
2.1.2 Unpacking Precautions
When the video capture card is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.1.
Make sure the packing box is facing upwards so the video capture card does
not fall out of the box.
Page 8
Make sure all the components listed in Section 2.1.3 are p
resent.
HDC-301MS Video Capture Card
2.1.3 Unpacking Checklist
NOTE:
If some of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the video capture card from or contact an IEI
sales representative directly. To contact an IEI sales representative,
please send an email to sales@ieiworld.com
The video capture card is shipped with the following components:
Quantity Item Image
1 HDC-301MS video capture card
1 HDMI input kit
(100mm, Φ5.0*7.0mm)
1 Utility CD
.
1
Table 2-1: Package List Contents
Quick installation guide
Page 9
Loading...