ECN-380-QM87 Embedded Sys tem
Page i
MODEL:
Rev. 1 .0 0 – 23 Oc tob er 2014
ECN-380-QM87
High Performance Fanles s Emb edded S ystem with Intel® Core™ i5-4400E 2.7
G Hz/Celeron® 2 000E processor, VGA, Dual HDMI,
R oHS Compliant
User Manual
ECN-380-QM87 Embedded Sys tem
Page ii
Date Version Changes
23 October, 201 4 1.00 Initial release
Revis ion
ECN-380-QM87 Embedded Sys tem
Page iii
Copyright
COP YRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd functi on and d oes not r epresent a com mitm ent on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n
purposes only and m ay be trademarks and/or registe red trademarks of their respec tive
owners.
ECN-380-QM87 Embedded Sys tem
Page iv
Ta b le of Contents
1 INTRODUCTION ........................................................................................................... 1
1.1 OVERVIEW ................................................................................................................... 2
1.2 MODEL VARIATIONS ..................................................................................................... 2
1.3 FEATURES ................................................................................................................... 3
1.4 TECHNICAL SPECIFICATIONS ........................................................................................ 3
1.5 FRONT PANEL .............................................................................................................. 5
1.6 REAR PANEL ................................................................................................................ 5
1.6.1 ECN-380-QM87-C/4G-R10 Rear Panel ............................................................ 5
1.6.2 ECN-380-QM87-i5/WD/4G-R10 Rear Panel .................................................... 6
1.7 DIMENSIONS ................................................................................................................ 8
2 UNPACKING .................................................................................................................. 9
2.1 ANTI-STATIC PRECAUTIONS ........................................................................................ 10
2.2 UNPACKING PRECAUTIONS ........................................................................................ 10
2.3 UNPACKING CHECKLIST .............................................................................................. 11
3 INSTALLATION ........................................................................................................... 13
3.1 INSTALLATION PRECAUTIONS ..................................................................................... 14
3.2 HARD DISK DRIVE (HDD) INSTALLATION ................................................................... 14
3.3 SO-DIMM INSTALLATION .......................................................................................... 17
3.4 PLUGGABLE DC-IN TERMINAL BLOCK INSTALLATION ................................................. 19
3.5 MOUNTING THE SYSTEM WITH MOUNTING BRACKETS ................................................. 19
3.6 EXTERNAL PERIPHERAL INTERFACE CONNECTORS ...................................................... 20
3.6.1 Audio Connection ............................................................................................. 21
3.6.2 HDMI Device Connection ................................................................................ 22
3.6.3 LAN Connection ............................................................................................... 22
3.6.4 DB-9 Serial Port Connection ........................................................................... 23
3.6.5 USB Device Connection ................................................................................... 24
3.6.6 VGA Monitor Connection ................................................................................ 25
3.7 POWERING ON/OFF THE SYSTEM ............................................................................... 26
4 BIOS .............................................................................................................................. 28
ECN-380-QM87 Embedded Sys tem
Page v
4.1 INTRODUCTION ......................................................................................................... 29
4.1.1 Starting Setup ................................................................................................... 29
4.1.2 Using Setup ...................................................................................................... 29
4.1.3 Getting Help ..................................................................................................... 30
4.1.4 Unable to Reboot after Configuration Changes .............................................. 30
4.1.5 BIOS Menu Bar ................................................................................................ 30
4.2 MAIN ........................................................................................................................ 32
4.3 ADVANCED ................................................................................................................ 33
4.3.1 ACPI Settings ................................................................................................... 34
4.3.2 RTC Wake Settings ........................................................................................... 35
4.3.3 T rusted Computing ........................................................................................... 36
4.3.4 CPU Configuration .......................................................................................... 38
4.3.5 SATA Configuration ......................................................................................... 40
4.3.6 Intel(R) Rapid Start Technology ....................................................................... 41
4.3.7 AMT Configuration .......................................................................................... 42
4.3.8 USB Configuration ........................................................................................... 44
4.3.9 iWDD H/W Monitor ......................................................................................... 45
4.3.9.1 Smart Fan Mode Configuration ................................................................ 45
4.3.10 F81866 Super IO Configuration .................................................................... 47
4.3.10.1 Serial Port n Configuration .................................................................... 48
4.3.11 F81866 H/W Monitor ..................................................................................... 51
4.3.12 Serial Port Console Redirection .................................................................... 51
4.3.13 iEi Feature ..................................................................................................... 55
4.4 CHIPSET .................................................................................................................... 55
4.4.1 PCH-IO Configuration .................................................................................... 57
4.4.1.1 PCI Express Configuration ....................................................................... 58
4.4.2 System Agent (SA ) Configuration .................................................................... 60
4.4.2.1 Graphics Configuration ............................................................................ 60
4.4.2.2 Memory Configuration .............................................................................. 63
4.5 BOOT ........................................................................................................................ 64
4.6 SECURITY .................................................................................................................. 66
4.7 SAVE & EXIT ............................................................................................................. 67
A SAFETY PRECAUTIONS ........................................................................................... 68
A.1 SAFETY PRECAUTIONS ............................................................................................... 69
ECN-380-QM87 Embedded Sys tem
Page vi
A.1.1 General Safety Precautions ............................................................................. 69
A.1.2 Anti-static Precautions .................................................................................... 69
A.1.3 Product Disposal ............................................................................................. 70
A.2 MAINTENANCE AND CLEANING PRECAUTIONS ............................................................ 71
A.2.1 Maintenance and Cleaning .............................................................................. 71
A.2.2 Cleaning T ools ................................................................................................. 71
B HAZARDOUS MATERIALS DISCLOSURE ............................................................. 73
B.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS
COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................................... 74
ECN-380-QM87 Embedded Sys tem
Page vii
List of Figures
Figure 1-1: ECN-380-QM87 ............................................................................................................ 2
Figure 1-2: ECN-380-QM87 Front Panel
Figure 1-3: ECN-380-QM87 Rear Panel
Figure 1-4: ECN-380-QM87 Rear Panel
Figure 1-5: Physical Dimensions (mm)
Figure 3-1: HDD Cover Retention Screws
Figure 3-2: HDD Installation
Figure 3-3: HDD Retention Screws
Figure 3-4: Memory Cover Retention Screw
Figure 3-5: SO-DIMM Socket
Figure 3-6: SO-DIMM Installation
Figure 3-7: Pluggable DC-in Terminal Block Installation
Figure 3-8: Mounting Bracket Retention Screws
Figure 3-9: Audio Connector
Figure 3-10: HDMI Connection
Figure 3-11: LAN Connection
Figure 3-12: DB-9 Serial Port Connector
Figure 3-13: USB Device Connection
........................................................................................ 5
......................................................................................... 6
......................................................................................... 7
........................................................................................ 8
..................................................................................15
........................................................................................................15
.............................................................................................16
..............................................................................17
.......................................................................................................18
................................................................................................18
.........................................................19
......................................................................20
.......................................................................................................21
....................................................................................................22
......................................................................................................23
....................................................................................24
.........................................................................................25
Figure 3-14: VGA Connector
Figure 3-15: Power Button
.......................................................................................................26
...........................................................................................................27
ECN-380-QM87 Embedded Sys tem
Page viii
List of Tables
Table 1-1: ECN-380-QM87 Model Variations ................................................................................ 3
Table 1-2: Technical Specifications
Table 4-1: BIOS Navigation Keys
ECN-380-QM87
.............................................................................................. 5
................................................................................................30
ECN-380-QM87 Embedded Sys tem
Page 1
Chapter
1
1 Introduction
ECN-380-QM87 Embedded Sys tem
Page 2
1.1 Overview
Figure 1-1: ECN-380-QM87
The ECN-380-QM87 is a platform based on Int el® Core™ i5-4400E or I ntel® Celeron®
2000E processor and the Intel® QM87 chipset.
The ECN-380-QM87 contains one VGA and two HDMI video outputs, which can be
applied to multi-display application and support high Full HD video quality. The
ECN-380-QM87 is equipped with an abundant of I/O ports and s upports a wide range of
operating temperature. Four USB 2.0 and two USB 3.0 ports provide flexi ble expansion
options. Serial device connectivity is provided by two RS-232 ports.
1.2 Model Variations
The model variations of the ECN-380-QM87 Series are listed below.
Model No.
ECN-380-QM87-i5-R10
ECN-380-QM87-C-R10
ECN-380-QM87-i5/WD-R10
ECN-380-QM87-C/WD-R10
ECN-380-QM87-i5/4G-R10
Processor Power Mem ory
Intel® Core™ i5-4400E 2.7 GHz 12 V DC w/o memory
Intel® Celeron® 2000E 2.2 GHz 12 V DC w/o memory
Intel® Core™ i5-4400E 2.7 GHz 9 V~36V DC w/o memory
Intel® Celeron® 2000E 2.2 GHz 9 V~36V DC w/o memory
Intel® Core™ i5-4400E 2.7 GHz 12 V DC 4GB memory pre-installed
ECN-380-QM87-C/4G-R10
ECN-380-QM87-i5/WD/4G-R10
Intel® Celeron® 2000E 2.2 GHz 12 V DC 4GB memory pre-installed
Intel® Core™ i5-4400E 2.7 GHz 9 V~36V DC 4GB memory pre-installed
ECN-380-QM87 Embedded Sys tem
Page 3
Model No.
ECN-380-QM87-C/WD/4G-R10
Table 1-1: ECN-380-QM87 Model Variations
Processor Power Mem ory
Intel® Celeron® 2000E 2.2 GHz 9 V~36V DC 4GB memory pre-installed
1.3 Features
The ECN-380-QM87 features are listed below:
Intel® Core™ i5-4400E 2.7 GHz/Celeron® 2000E 2.2 GHz
Triple video outputs: 2 x HDMI + VGA
Two 2.5'' SATA 6Gb/s HDD/SSD drive bays
1.4 Technical Specifications
The ECN-380-QM87 technical specifications are listed in Table 1-2.
Specifications
Chassis
Color
Dimensions (WxDxH)
System Fan
Chassis Construction
Motherboard
CPU
Chipset
Mem ory
Storage
Hard Drive
I/O Interfaces
USB
Silver
265 x 134 x 56.7 mm
Fanless
Aluminum alloys with heavy dut y metal
Intel® Core™ i5-4400E 2.7 GHz
Intel® Celeron® 2000E 2.2 GHz
Intel® QM87
One 204-pin DDR3 4GB SO-DIMMs pre-installed (system max: 8GB)
2 x 2.5'' SATA 6Gb/s HDD/SSD drive bay
2 x USB 3.0 ports
4 x USB 2.0 ports
ECN-380-QM87 Embedded Sys tem
Page 4
Specifications
Ethernet
RS-232
Display
Resolution
Aud io
Wireles s
Expansions
PCIe Mi n i
Remote Management
iRIS( iE i Remot e
2 x RJ-45
Intel® I210 PCIe GbE controller
Intel® Clarkvill-V PHY with Intel® AMT 9.0 support
2 x DB-9
2 x HDMI, 1 x VGA
VGA: Up to 1920 x 1200@60Hz
HDMI: Up to 2500 x 1600@60Hz
1 x Line-out, 1 x Mic-in
802.1b/g/n 2T2R (optional)
1 x Full-size PCIe Mini (Reserved for Wi-Fi)
1 x iRIS-2400 (Optional)
Intelligent Systems )
Power
Power Input
Power Consumption
Reliability
Mounting
Operating Temperature
Humidity
Operating Shock
12V DC SKU:
2 pin DC Jack only
9~36V DC SKU:
2 pin DC Jack & 3 pin terminal
12 V@4.6 A
(Intel® mobile Core™ Core i5-4400E with 4GB 1333MH z DDR3
memory)
Wall mount, VESA 100
-20°C ~60°C with air flow (SSD)
5% ~ 95%, non-condensing
Half-sine wave shock 5G, 11ms, 3 shocks per axis
ECN-380-QM87 Embedded Sys tem
Page 5
Specifications
Operating Vibration
Weight (Net/Gross)
Table 1-2: Technical Specifications
MIL-STD-810F 514.5C-2 (with SSD)
2.4 kg/4.2 kg
1.5 Front Panel
The ECN-380-QM87 f ront pane l contains:
1 x HDD LED
1 x Power button
2 x RS-232 serial ports
2 x USB 2.0 ports
An overview of the front panel is shown in Figure 1-2.
Figure 1-2: ECN-380-QM87 Front Panel
1.6 Rear Panel
1.6.1 ECN-380-QM87-C/4G-R10 Rear Panel
The ECN-380-QM87 rear panel contains:
1 x HDD bay
2 x HDMI ports
1 x Line-out port
ECN-380-QM87 Embedded Sys tem
Page 6
1 x Mic-in port
1 x DC jack for 12V DC power input
2 x RJ-45 LAN ports
2 x USB 3.0 ports
2 x USB 2.0 ports
1 x VGA port
An overview of the rear panel is shown in Figure 1-3 below.
Figure 1-3: ECN-380-QM87 Rear Panel
1.6.2 ECN-380-QM87-i5/WD/4G-R10 Rear Panel
The ECN-380-QM87 rear panel contains:
1 x HDD bay
2 x HDMI ports
1 x Line-out port
1 x Mic-in port
1 x DC jack for 9 V ~ 36 V power input
1 x 3-pin terminal block for 9 V ~ 36 V power input
2 x RJ-45 LAN ports
2 x USB 3.0 ports
2 x USB 2.0 ports
1 x VGA port
ECN-380-QM87 Embedded Sys tem
Page 7
An overview of the rear panel is shown in Figure 1-3 below.
Figure 1-4: ECN-380-QM87 Rear Panel
ECN-380-QM87 Embedded Sys tem
Page 8
1.7 Dimensions
The physical dimensions are shown below:
Figure 1-5: Physical Dimensions (mm)
ECN-380-QM87 Embedded Sys tem
Page 9
Chapter
2
2 Unpacking
ECN-380-QM87 Embedded Sys tem
Page 10
may result in
2.1 Anti-s tatic Precautions
WARNING:
Failure to take ESD precautions during installation
permanent damage to the ECN-380-QM87 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the ECN-380-QM87. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the ECN-380-QM87 or any other electrical c omponent is
handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Touch any grounded conducting material before handling
the board. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the ECN-380-QM87, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
ECN-380-QM87.
2.2 Unpacking Precautions
When the ECN-380-QM87 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.
Make sure the packing box is facing upwards so the ECN-380-QM87 does not
fall out of the box.
Make sure all the components shown in Section 2.3 are present.
ECN-380-QM87 Embedded Sys tem
Page 11
2.3 Unpacking Checklis t
NOTE:
If some of the components listed in the checklist below are m issing,
please do not proceed with the installation. Contact the IEI res eller or
vendor you purchased the ECN-380-QM87 from or contact an IEI sales
representative direct ly. To contact an IEI s ales representati ve, please
send an email to
The ECN-380-QM87 is shipped with the following components:
Quantity Item and Part Numb er Image
Standard
1 ECN-380-QM87 Series
1 Power Adapter
1 Power Cord
sales@iei.com.tw.
2 Mounting brackets
(P/N: 41020-0396J4-00-RS)
Loading...