How it Works
IEI Technology
Loading...
A
B
D
E
Loading...
Loading...
AFL3-W15C-ULT3
User Manual
64 pgs5.14 Mb0
Table of contents
Loading...

IEI Technology AFL3-W15C-ULT3 User Manual

Download
Page 1
AFL3-W15C/W19C-ULT3 Panel PC
MODEL:
AFL3-W15C/W19C-ULT3
Flat Bezel Panel PC with Intel® Core™ i5-6300U / Celeron® 3955U CPU, Touchscreen, Four USB 3.0, Dual GbE LAN, RS-232/422/485,
User Manual
User Manual
Rev. 1.00 - November 1, 2016
Page I
Page 2
Date Version Changes
November 1, 2016 1.00 Initial release
AFL3-W15C/W19C-ULT3 Panel PC
Revision
Page II
Page 3
AFL3-W15C/W19C-ULT3 Panel PC
Safety Instructions
Warning! Read the user manual before connecting the system to the power
source.
Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine
Stromquelle anschließen.
Attention! Avant de brancher le système à la source d'alimentation, consultez le
mode d'emploi.
Avvertenza! Consultare il manuale utente prima di collegare il sistema all'alimentatore. Atención! Lea atentamente este manual del usuario antes de operar la fuente de alimentación.
警告！在將系統連接到電源之前，請仔細閱讀使用手冊。 警告！在将系统连接到电源之前，请仔细阅读使用手册。
Warning! To prevent the system from overheating, do not operate it in an area that
exceeds the maximum operating temperature described in the user manual.
Vorsicht! Um eine Überhitzung des Systems zu vermeiden, betreiben Sie es ausschließlich im zulässigen Betriebstemperaturbereich. Dieser ist in der Bedienungsanleitung vermerkt.
Attention! Pour éviter la surchauffe du système, ne l'utilisez pas dans une zone
dont la température dépasse les limites décrits dans le mode d'emploi.
Avvertenza! Per evitare che il sistema si surriscaldi, non utilizzarlo in aree che
superino la temperatura massima d'esercizio descritta nel manuale utente.
Atención! Para evitar el excesivo calentamiento del sistema, no opere en las
condiciones de temperatura superior a lo recomendado en este manual del usuario.
警告！為防止系統過熱，不要在超過使用手冊上記載的產品工作溫度範圍之外操作
此系統。
警告！为防止系统过热，不要在超过使用手册上记载的产品工作温度范围之外操作
此系统。
Page III
Page 4
AFL3-W15C/W19C-ULT3 Panel PC
Warning! Use only the adapter and power cord approved for this system. Use of
another type of adapter may risk fire or explosion. Please refer to the user manual
for the power adapter specifications. Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur Folge haben. Prüfen Sie die jeweiligen Spezifikationen in der Bedienungsanleitung. Attention! Utilisez exclusivement le câble d'alimentation et l’adaptateur
homologués pour ce système. L’utilisation d’un autre type d’adaptateur risquerait
de provoquer un incendie ou une explosion. Veuillez référer au mode d'emploi
pour les spécifications de l'adaptateur d'alimentation. Avvertenza! Utilizzare solo l'adattatore e il cavo di alimentazione approvati per
questo sistema. L'uso di un altro tipo di adattatore può causare rischio d'incendio
o esplosione. Si prega di fare riferimento al manuale utente per le specifiche
sull'alimentazione. Atención! Utilice solamente el adaptador de corriente alterna (CA) con Marcas
Conformidad otorgadas. Cualquier otro adaptador no otorgado aumenta el riesgo
de explosión o incendio. Por favor consulte el manual del usuario para las
especificaciones del adaptador de alimentación.
警告！只能使用經過認證、適用於本系統的電源變壓器與電源線。使用不適用的電
源變壓器將可能導致火災或爆炸。電源變壓器規格請參考使用手冊。
警告！只能使用经过认证，适用于本系统的电源适配器与电源线。使用不适用的电
源适配器将可能导致火灾或爆炸。电源适配器规格请参考使用手册。
Warning! Ultimate disposal of this product should be handled according to all
national laws and regulations.
Vorsicht! Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und
Gesetzen des Landes erfolgen.
Attention! La mise au rebut ou le recyclage de ce produit sont généralement soumis aux lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent.
Avvertenza! Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e i regolamenti locali. Atención! La disposición final de residuos de este producto se debe cumplir con las normativas y leyes del país.
警告！本產品的廢棄處理應根據該國家的法律和規章進行。 警告！本产品的废弃处理应根据该国家的法律和规章进行。
Page IV
Page 5
AFL3-W15C/W19C-ULT3 Panel PC
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page V
Page 6
AFL3-W15C/W19C-ULT3 Panel PC
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.
Page VI
Page 7
AFL3-W15C/W19C-ULT3 Panel PC
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 FRONT PANEL ............................................................................................................. 4
1.5 BOTTOM PANEL .......................................................................................................... 5
1.6 REAR PANEL............................................................................................................... 6
1.7 SYSTEM SPECIFICATIONS............................................................................................ 7
1.8 DIMENSIONS............................................................................................................. 10
1.8.1 AFL3-W15C-ULT3 Dimensions....................................................................... 10
1.8.2 AFL3-W19C-ULT3 Dimensions........................................................................11
2 UNPACKING............................................................................................................... 12
2.1 UNPACKING.............................................................................................................. 13
2.2 PACKING LIST........................................................................................................... 13
2.3 OPTIONAL ITEMS...................................................................................................... 15
3 INSTALLATION ......................................................................................................... 17
3.1 ANTI-STATIC PRECAUTIONS...................................................................................... 18
INSTALLATION PRECAUTIONS................................................................................... 18
3.2
3.3 INST ALLATION AND CONFIGURATION STEPS............................................................. 19
3.4
REMOVING THE BACK COVERS ................................................................................ 19
3.5 M.2 MODULE INSTALLATION.................................................................................... 22
3.6 MSATA MODULE INSTALLATION (FULL-SIZE).......................................................... 24
3.7 HDD INSTALLATION................................................................................................. 27
3.8 DB-9 SERIAL PORT PIN 9 SELECTION....................................................................... 29
3.9 RS-232/422/485 SERIAL PORT SELECTION .............................................................. 30
3.9.1 COM1 Pinouts ................................................................................................. 31
3.10 CLEAR CMOS........................................................................................................ 31
3.11 AT/ATX MODE SELECTION.................................................................................... 32
3.11.1 AT Power Mode.............................................................................................. 32
Page VII
Page 8
AFL3-W15C/W19C-ULT3 Panel PC
3.1 1.2 ATX Power Mode ........................................................................................... 32
MOUNTING THE SYSTEM ........................................................................................ 33
3.12
3.12.1 Wall Mounting................................................................................................ 33
3.12.2 Panel Mounting.............................................................................................. 36
3.12.3 Cabinet and Rack Installation ....................................................................... 40
3.12.4 Arm Mounting ................................................................................................ 43
3.12.5 Stand Mounting.............................................................................................. 45
3.13 POWERING ON THE SYSTEM................................................................................... 46
3.14 RESET THE SYSTEM................................................................................................ 47
3.15 SOFTWARE INSTALLATION...................................................................................... 47
3.16 INSTALLING WINDOWS 7 FROM USB 3.0 DRIVES................................................... 48
4 BIOS SETUP................................................................................................................ 49
4.1
INTRODUCTION......................................................................................................... 50
4.1.1 Starting Setup................................................................................................... 50
4.1.2 Using Setup...................................................................................................... 50
4.1.3 Getting Help..................................................................................................... 51
4.1.4 Unable to Reboot after Configuration Changes.............................................. 51
4.1.5 BIOS Menu Bar................................................................................................ 51
4.2 MAIN........................................................................................................................ 52
4.3 ADVANCED............................................................................................................... 53
4.3.1 ACPI Settings................................................................................................... 54
4.3.2 F81866 Super IO Configuration...................................................................... 55
4.3.2.1 Serial Port n Configuration....................................................................... 55
4.3.2.1.1 Serial Port 1 Configuration................................................................ 56
4.3.2.1.2 Serial Port 2 Configuration................................................................ 57
4.3.2.1.3 Serial Port 3 Configuration................................................................ 58
4.3.2.1.4 Serial Port 4 Configuration................................................................ 59
4.3.3 F81866 H/W Monitor....................................................................................... 60
4.3.4 RTC Wake Settings ........................................................................................... 61
4.3.5 Serial Port Console Redirection...................................................................... 62
4.3.5.1 Legacy Console Redirection Settings....................................................... 63
4.3.5.2 Console Redirection Settings.................................................................... 64
4.3.6 CPU Configuration.......................................................................................... 66
4.3.7 SATA Configuration ......................................................................................... 68
Page VIII
Page 9
AFL3-W15C/W19C-ULT3 Panel PC
4.3.8 USB Configuration........................................................................................... 70
4.3.9 IEI Feature....................................................................................................... 71
CHIPSET ................................................................................................................... 72
4.4
4.4.1 System Agent (SA) Configuration .................................................................... 72
4.4.1.1 Graphics Configuration............................................................................. 73
4.4.1.1.1 LCD Control ...................................................................................... 75
4.4.1.2 Memory Configuration ............................................................................. 76
4.4.2 PCH-IO Configuration .................................................................................... 76
4.4.2.1 PCI Express Configuration....................................................................... 77
4.4.2.2 HD Audio Configuration........................................................................... 78
4.5 SECURITY................................................................................................................. 79
4.6
BOOT........................................................................................................................ 80
4.7 EXIT......................................................................................................................... 82
5 SYSTEM MAINTENANCE ....................................................................................... 84
5.1 SYSTEM MAINTENANCE INTRODUCTION .................................................................. 85
5.2 ANTI-STATIC PRECAUTIONS...................................................................................... 85
5.3 TURN OFF THE POWER.............................................................................................. 86
5.4 SO-DIMM MODULE REPLACEMENT........................................................................ 86
6 INTERFACE CONNECTORS................................................................................... 89
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 90
6.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 91
6.2.1 Audio Connector (AUDIO_OUT1).................................................................. 92
6.2.2 Audio Out Connector (AUDIO_OUT2)........................................................... 92
6.2.3 Battery Connector (BAT1)............................................................................... 93
6.2.4 Debug Connector (DBG_PORT1)................................................................... 93
6.2.5 Digital I/O Connector (DIO1)......................................................................... 93
6.2.6 DisplayPort Connector (DP1)......................................................................... 94
6.2.7 Inverter Connector (INVERTER1)................................................................... 94
6.2.8 LVDS Connector (LVDS1)............................................................................... 94
6.2.9 M.2 M-key Slot (M2_M_KEY) ......................................................................... 95
6.2.10 MCU Connector (HOTKEY_CN1) ................................................................ 96
6.2.11 Microphone Connector (DMIC1)................................................................... 97
6.2.12 PCIe Mini Connector, Full-Size/Half-size (M_PCIE1)
................................. 97
Page IX
Page 10
AFL3-W15C/W19C-ULT3 Panel PC
6.2.13 Power Button Connector (PW_BTN1)........................................................... 98
6.2.14 Power LED Connector (PW_LED1).............................................................. 98
6.2.15 RS-232 Serial Port Connector (COM3)......................................................... 98
6.2.16 RS-232 Serial Port Connector (COM4)......................................................... 99
6.2.17 SATA Connector (SATA1)............................................................................... 99
6.2.18 SPI Flash Connector (JSPI1)......................................................................... 99
6.2.19 Touch Panel Connector (TS1)...................................................................... 100
6.2.20 TTL Serial Connector, COM6 (NFC_COM6).............................................. 100
6.2.21 USB Connector (BAR_USB1)...................................................................... 100
6.2.22 USB Connector (BT_USB1)......................................................................... 101
6.2.23 USB Connector (CAM_USB1)..................................................................... 101
6.2.24 USB Connector (RFID_USB1).................................................................... 101
6.2.25 USB Connector (TOUCH_USB1) ................................................................ 102
6.2.26 USB 2.0 Connector (USB20_CN1).............................................................. 102
6.2.27 USB Power Connector (USB_PWR1).......................................................... 102
6.3 EXTERNAL INTERFACE PANEL CONNECTORS .......................................................... 103
6.3.1 Ethernet Connectors (LAN2 & LAN3)........................................................... 103
6.3.2 HDMI Connector (HDMI1)........................................................................... 104
6.3.3 Power Connector (PWR1) .......................................................................... 104
6.3.4 RS-232/422/485 DB-9 Serial Port (COM1)................................................... 104
6.3.5 RS-232 RJ-45 Serial Port (COM2)................................................................ 105
6.3.6 USB 3.0 Connectors (USB_CON1)................................................................ 105
6.3.7 USB 3.0 Connectors (USB_CON2)................................................................ 106
PRECONFIGURED JUMPER SETTINGS....................................................................... 106
6.4
6.4.1 LVDS Panel Voltage Selection Jumper (J_VLVDS1)..................................... 107
6.4.2 LVDS Panel Resolution Selection Jumper (SW1).......................................... 107
A REGULATORY COMPLIANCE............................................................................ 108
B SAFETY PRECAUTIONS........................................................................................114
B.1 SAFETY PRECAUTIONS............................................................................................115
B.1.1 General Safety Precautions............................................................................115
B.1.2 Anti-static Precautions...................................................................................116
B.1.3 Product Disposal............................................................................................117
B.2 MAINTENANCE AND CLEANING PRECAUTIONS .......................................................118
B.2.1 Maintenance and Cleaning.............................................................................118
Page X
Page 11
AFL3-W15C/W19C-ULT3 Panel PC
B.2.2 Cleaning Tools................................................................................................118
C BIOS MENU OPTIONS........................................................................................... 120
D WATCHDOG TIMER .............................................................................................. 123
E HAZARDOUS MATERIALS DISCLOSURE ....................................................... 126
Page XI
Page 12
AFL3-W15C/W19C-ULT3 Panel PC
List of Figures
Figure 1-1: AFL3-W15C/W19C-ULT3 Flat Bezel Panel PC..........................................................2
Figure 1-2: Front View....................................................................................................................4
Figure 1-3: AFL3-W15C-ULT3 Bottom Panel ...............................................................................5
Figure 1-4: AFL3-W19C-ULT3 Bottom Panel ...............................................................................5
Figure 1-5: AFL3-W19C-ULT3 Rear View .....................................................................................6
Figure 1-6: AFL3-W15C-ULT3 Dimensions (mm) ......................................................................10
Figure 1-7: AFL3-W19C-ULT3 Dimensions (mm) ......................................................................11
Figure 3-1: AFL3-W15C-ULT3 Back Cover Retention Screws .................................................19
Figure 3-2: AFL3-W19C-ULT3 Back Cover Retention Screws .................................................20
Figure 3-3: AFL3-W15C-ULT3 Aluminum Cover Retention Screws ........................................20
Figure 3-4: AFL3-W19C-ULT3 Aluminum Cover Retention Screws ........................................21
Figure 3-5: Lift the Aluminum Cover ..........................................................................................21
Figure 3-6: M.2 Module Slot Location.........................................................................................22
Figure 3-7: Inserting the M.2 Module into the Slot at an Angle ...............................................23
Figure 3-8: Securing the M.2 Module..........................................................................................23
Figure 3-9: mSATA Module Slot Location..................................................................................24
Figure 3-10: Removing the Retention Screw and Standoff......................................................25
Figure 3-11: Installing the Standoff ............................................................................................25
Figure 3-12: Installing an mSATA Module .................................................................................26
Figure 3-13: Securing the mSATA Module.................................................................................26
Figure 3-14: HDD Bracket Retention Screws.............................................................................27
Figure 3-15: HDD Retention Screws...........................................................................................28
Figure 3-16: HDD Installation ......................................................................................................28
Figure 3-17: DB-9 Serial Port Pin 9 Setting Jumper Locations................................................29
Figure 3-18: RS-232/422/485 Selection Jumper Locations.......................................................30
Figure 3-19: Clear CMOS Button Location.................................................................................31
Figure 3-20: AT/ATX Switch Location.........................................................................................32
Figure 3-21: Wall-mounting Bracket...........................................................................................34
Figure 3-22: Chassis Support Screws........................................................................................35
Figure 3-23: Secure the Panel PC...............................................................................................36
Figure 3-24: AFL3-W15C-ULT3 Cutout Dimensions..................................................................36
Page XII
Page 13
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-25: AFL3-W19C-ULT3 Cutout Dimensions..................................................................37
Figure 3-26: Panel Mounting Kit Installation .............................................................................38
Figure 3-27: Securing Panel Mounting Brackets.......................................................................39
Figure 3-28: Rack Mounting Kit Installation ..............................................................................41
Figure 3-29: Securing Rack Mounting Brackets........................................................................42
Figure 3-30: Install into a Rack/Cabinet .....................................................................................42
Figure 3-31: Arm Mounting Retention Screw Holes..................................................................44
Figure 3-32: Arm Mounting..........................................................................................................44
Figure 3-33: Stand Mounting (Stand-A/Bxx)..............................................................................45
Figure 3-34: Powering On the System........................................................................................46
Figure 3-35: Reset Button Location............................................................................................47
Figure 5-1: SO-DIMM module Location ......................................................................................87
Figure 5-2: SO-DIMM Installation................................................................................................87
Figure 6-1: Main Board Layout Diagram....................................................................................90
Page XIII
Page 14
AFL3-W15C/W19C-ULT3 Panel PC
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: System Specifications..................................................................................................9
Table 3-1: COM1 Pin 9 Setting Jumper Settings (JP5) .............................................................29
Table 3-2: COM2 Pin 9 Setting Jumper Settings (JP4) .............................................................29
Table 3-3: RS-232422/485 Selection Jumper Settings (COM1_SEL1).....................................30
Table 3-4: RS-232/422/485 Selection Jumper Settings (JP3) ...................................................30
Table 3-5: RS-232/422/485 Serial Port (COM1) Pinouts ............................................................31
Table 6-1: Peripheral Interface Connectors...............................................................................92
Table 6-2: Audio Connector (AUDIO_OUT1) Pinouts................................................................92
Table 6-3: Audio Out Connector (AUDIO_OUT2) Pinouts ........................................................92
Table 6-4: Battery Connector (BAT1) Pinouts...........................................................................93
Table 6-5: Debug Connector (DBG_PORT1) Pinouts................................................................93
Table 6-6: Digital I/O Connector (DIO1) Pinouts........................................................................93
Table 6-7: DisplayPort Connector (DP1) Pinouts......................................................................94
Table 6-8: Inverter Connector (INVERTER1) Pinouts................................................................94
Table 6-9: LVDS Connector (LVDS1) Pinouts............................................................................95
Table 6-10: M.2 M-key Slot (M2_M_KEY) Pinouts......................................................................96
Table 6-11: MCU Connector (HOTKEY_CN1) Pinouts...............................................................97
Table 6-12: Microphone Connector (DMIC1) Pinouts ...............................................................97
Table 6-13: PCIe Mini Connector (M_PCIE1) Pinouts ...............................................................98
Table 6-14: Power Button Connector (PW_BTN1) Pinouts ......................................................98
Table 6-15: Power LED Connector (PW_LED1) Pinouts...........................................................98
Table 6-16: RS-232 Serial Port Connector (COM3) Pinouts .....................................................98
Table 6-17: RS-232 Serial Port Connector (COM4) Pinouts .....................................................99
Table 6-18: SATA Connector (SATA1) Pinouts .........................................................................99
Table 6-19: SPI Flash Connector (JSPI1) Pinouts.....................................................................99
Table 6-20: Touch Panel Connector (TS1) Pinouts................................................................ 100
Table 6-21: TTL Serial Connector, COM6 (NFC_COM6) Pinouts .......................................... 100
Table 6-22: USB Connector (BAR_USB1) Pinouts................................................................. 100
Table 6-23: USB Connector (BT_USB1) Pinouts.................................................................... 101
Table 6-24: USB Connector (CAM_USB1) Pinouts................................................................. 101
Page XIV
Page 15
AFL3-W15C/W19C-ULT3 Panel PC
Table 6-25: USB Connector (RFID_USB1) Pinouts ................................................................ 101
Table 6-26: USB Connector (TOUCH_USB1) Pinouts............................................................ 102
Table 6-27: USB 2.0 Connector (USB20_CN1) Pinouts.......................................................... 102
Table 6-28: USB Power Connector (USB_PWR1) Pinouts..................................................... 102
Table 6-29: Rear Panel Connectors......................................................................................... 103
Table 6-30: Ethernet Connectors (LAN2 & LAN3) Pinouts.................................................... 103
Table 6-31: HDMI Connector (HDMI1) Pinouts........................................................................ 104
Table 6-32: Power Connector (PWR1) Pinouts....................................................................... 104
Table 6-33: RS-232/422/485 DB-9 Serial Port (COM1) Pinouts.............................................. 104
Table 6-34: RS-232 RJ-45 Serial Port (COM2) Pinouts........................................................... 105
Table 6-35: USB 3.0 Connectors (USB_CON12) Pinouts....................................................... 105
Table 6-36: USB 3.0 Connectors (USB_CON2) Pinouts......................................................... 106
Table 6-37: Preconfigured Jumpers ........................................................................................ 106
Table 6-38: LVDS Voltage Selection Jumper (J_VLVDS1) Settings..................................... 107
Table 6-39: LVDS Resolution Selection Jumper (SW1) Settings.......................................... 107
Page XV
Page 16
AFL3-W15C/W19C-ULT3 Panel PC
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................52
BIOS Menu 2: Advanced..............................................................................................................53
BIOS Menu 3: ACPI Settings .......................................................................................................54
BIOS Menu 4: F81866 Super IO Configuration ..........................................................................55
BIOS Menu 5: Serial Port n Configuration .................................................................................55
BIOS Menu 6: F81866 H/W Monitor.............................................................................................60
BIOS Menu 7: RTC Wake Settings..............................................................................................61
BIOS Menu 8: Serial Port Console Redirection.........................................................................62
BIOS Menu 9: Legacy Console Redirection Settings ...............................................................63
BIOS Menu 10: Console Redirection Settings...........................................................................64
BIOS Menu 11: CPU Configuration.............................................................................................66
BIOS Menu 12: SATA Configuration...........................................................................................68
BIOS Menu 13: USB Configuration.............................................................................................70
BIOS Menu 14: IEI Feature...........................................................................................................71
BIOS Menu 15: Chipset................................................................................................................72
BIOS Menu 16: System Agent (SA) Configuration....................................................................72
BIOS Menu 17: Graphics Configuration.....................................................................................73
BIOS Menu 18: LCD Control........................................................................................................75
BIOS Menu 19: Memory Configuration.......................................................................................76
BIOS Menu 20: PCH-IO Configuration........................................................................................76
BIOS Menu 21: PCI Express Configuration ...............................................................................77
BIOS Menu 22: HD Audio Configuration....................................................................................78
BIOS Menu 23: Security...............................................................................................................79
BIOS Menu 24: Boot.....................................................................................................................80
BIOS Menu 25: Exit.......................................................................................................................82
Page XVI
Page 17
AFL3-W15C/W19C-ULT3 Panel PC
Chapter
1

1 Introduction

Page 1
Page 18

1.1 Overview

Figure 1-1: AFL3-W15C/W19C-ULT3 Flat Bezel Panel PC
AFL3-W15C/W19C-ULT3 Panel PC
®
The AFL3-W15C/W19C-ULT3 series is a quad-core Intel
Celeron
and peripherals. The flat-bezel design is ideal for easy and simplified integration into
various applications.
The Intel
optimal memory, graphics, and peripheral I/O support. The system comes with 4.0 GB of
DDR4 SO-DIMM memory ensuring smooth data throughputs with reduced bottlenecks
and fast system access.
One RS-232/422/485 serial port, one RS-232 serial port and four external USB 3.0 ports
ensure simplified connectivity to a variety of external peripheral devices. Wi-Fi capabilities
and two RJ-45 Ethernet connectors provide the system with smooth connection to an
external LAN.
®
3955U powered flat bezel touchscreen panel PC with a rich variety of functions
®
Core i5-6300U / Celeron® 3955U is a System-on-Chip (SoC) that ensures
Core i5-6300U or Intel®
Page 2
Page 19
AFL3-W15C/W19C-ULT3 Panel PC

1.2 Model Variations

There are several models in the AFL3-W15C/W19C-ULT3 series. The model numbers
and model variations are listed below.
Model Size Processor Touchscreen AFL3-W15C-ULT3-C/R/4G
AFL3-W15C-ULT3-C/PC/4G
AFL3-W15C-ULT3-i5/R/4G
AFL3-W15C-ULT3-i5/PC/4G
AFL3-W19C-ULT3-C/PC/4G
AFL3-W19C-ULT3-i5/PC/4G
Table 1-1: Model Variations

1.3 Features

The AFL3-W15C/W19C-ULT3 features are listed below:
Flat-bezel LCD with LED backlight
Intel
Preinstalled with 4 GB of DDR4 memory (system max. 32 GB)
®
15.6” Intel
15.6” Intel
15.6”
15.6”
18.5” Intel
18.5”
®
Core i5-6300U or Intel® Celeron® 3955U processor
Celeron® 3955U 5-wire resistive type
®
Celeron® 3955U Projected capacitive type
®
Core i5-6300U
Intel
®
Core i5-6300U
Intel
®
Celeron® 3955U Projected capacitive type
®
Core i5-6300U
Intel
5-wire resistive type
Projected capacitive type
Projected capacitive type
5-wire resistive type or projected capacitive type touchscreen
Wi-Fi 802.11a/b/g/n/ac high speed wireless
Two PCIe GbE RJ-45 connectors
Two internal speakers
Four USB 3.0 ports
One RS-232/422/485 serial port and one RS-232 serial port by D-sub 9
connectors
Optional RFID reader
Optional magnetic stripe card reader
9 V–30 V wide range DC power input
Page 3
Page 20
IP 64 compliant front panel

1.4 Front Panel

The front side of the AFL3-W15C/W19C-ULT3 is a flat-bezel panel with a TFT LCD screen
AFL3-W15C/W19C-ULT3 Panel PC
surrounded by a PC/ABS plastic frame (Figure 1-2).
Figure 1-2: Front View
Page 4
There is a power LED indicator located on the front panel. The status descriptions of the
power LED indicator are listed below.
Off: power cord not attached or power supply failure  Solid amber: the system is connected to a power source and is ready to be
turned on.
Solid green: the system is turned on.
Page 21
AFL3-W15C/W19C-ULT3 Panel PC

1.5 Bottom Panel

The bottom panel of the AFL3-W15C/W19C-ULT3 has the following connectors and switches (Figure 1-4).
Figure 1-3: AFL3-W15C-ULT3 Bottom Panel
Figure 1-4: AFL3-W19C-ULT3 Bottom Panel
Page 5
Page 22

1.6 Rear Panel

The rear panel has two speakers and retention screw holes that support VESA mounting.
The rear panel also has several retention screw holes for installing the optional barcode
scanner and magnetic stripe card reader.
AFL3-W15C/W19C-ULT3 Panel PC
Figure 1-5: AFL3-W19C-ULT3 Rear View
Page 6
Page 23
AFL3-W15C/W19C-ULT3 Panel PC

1.7 System Specifications

The technical specifications for the AFL3-W15C/W19C-ULT3 systems are listed in
Table 1-2.
Specification AFL3-W15C-ULT3 AFL3-W19C-ULT3 LCD Size
Max. Resolution
Brightness (cd/m2)
Contrast Ratio
LCD Color
Pixel Pitch (H x V) (mm)
Viewing Angle (H-V)
Backlight MTBF
Backlight
Touchscreen
Touch Controller
15.6" (16:9) 18.5” (16:9)
1366 (W) x 768 (H) 1366 (W) x 768 (H)
300 250
700:1 1000:1
16.7M 262K
0.240 x 0.240 0.240 x 0.240
160° / 160° 170° / 160°
50,000 hrs 30,000 hrs
LED LED
5-wire resistive/
Projected capacitive
Resistive: PenMount DMC9000
Projected capacitive
EETI EXC 3160
CPU (SoC)
Memory
Ethernet
Storage
Capacitive: EETI EXC 7200
®
Core i5-6300U or Intel® Celeron® 3955U
Intel
Two 260-pin DDR4 SO-DIMM slots preinstalled with 4 GB SDRAM
(system max. 32 GB)
®
LAN1: Intel
LAN2: Intel
One full-size/half-size PCIe Mini slot supports mSATA module
One M.2 M-key slot for M.2 2280 module installation
I219-LM PHY with Intel® AMT 11.0 supported
®
I211-AT PCIe GbE controller
Page 7
Page 24
One 2.5” SATA 3Gb/s HDD bay
AFL3-W15C/W19C-ULT3 Panel PC
Audio
Internal Speaker
Camera
Wireless
Bluetooth
RFID Reader
Card Reader
OSD Function
Construction Material
Thermal Design
VESA Mount
Realtek ALC892 HD Audio codec
Two 3 W
2-megapixel with low light function and digital microphone
One 802.11a/b/g/n/ac wireless LAN module
(half-size PCIe Mini card)
Bluetooth v4.0
Mifare 13.56 MHz card reader (optional)
Magnetic stripe card reader (optional)
Controlled by OSD software
PC+ABS plastic
Fanless
75 mm x 75 mm
Mounting
Front Panel Color
Net/Gross Weight
Dimensions (W x H x D)
Operating Temperature
Storage Temperature
Humidity
IP Level
Safety/EMC
Power Supply
100 mm x 100 mm
Panel, wall, rack, stand or arm mounting
Black C
4.5 kg / 6.5 kg 7.3 kg / 10 kg
396 mm x 250 mm x 64 mm 472 mm x 292 mm x 68 mm
-20ºC ~ 50ºC
-20ºC ~ 60ºC
10% ~ 95% (non-condensing)
IP 64 compliant front panel
CE, FCC
96 W power adapter
Page 8
Page 25
AFL3-W15C/W19C-ULT3 Panel PC
Input:
Output:
Power Requirement
Power Consumption
I/O Ports and Switches
100 V ~ 240 V AC, 50 Hz ~ 60 Hz
12 V DC, 8 A
9 V ~ 30 V DC
56 W, 12 V @ 4.6 A 86 W, 12 V @ 7.1 A
1 x RS-232/422/485 serial port (DB-9 connector)
1 x RS-232 serial port (DB-9 connector)
2 x GbE LAN (RJ-45 connector)
4 x USB 3.0 connectors
1 x HDMI output connector
1 x Power switch
1 x AT/ATX switch
1 x Reset button
Table 1-2: System Specifications
1 x 9 V ~ 30 V DC input jack
Page 9
Page 26

1.8 Dimensions

The following sections list the dimensions of each model.

1.8.1 AFL3-W15C-ULT3 Dimensions

The AFL3-W15C-ULT3 dimensions are shown below.
AFL3-W15C/W19C-ULT3 Panel PC
Page 10
Figure 1-6: AFL3-W15C-ULT3 Dimensions (mm)
Page 27
AFL3-W15C/W19C-ULT3 Panel PC

1.8.2 AFL3-W19C-ULT3 Dimensions

The AFL3-W19C-ULT3 dimensions are shown below.
Figure 1-7: AFL3-W19C-ULT3 Dimensions (mm)
Page 11
Page 28
AFL3-W15C/W19C-ULT3 Panel PC
Chapter
2

2 Unpacking

Page 12
Page 29
AFL3-W15C/W19C-ULT3 Panel PC

2.1 Unpacking

To unpack the flat bezel panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the flat bezel panel PC has
been properly installed. This ensures the screen is protected during the
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the panel PC out of the boxes.
Step 6: Remove the peripheral parts box from the main box. Step 0:

2.2 Packing List

NOTE:
If any of the components listed in the checklist below are missing, do not
proceed with the installation. Contact the IEI reseller or vendor the
AFL3-W15C/W19C-ULT3 was purchased from or contact an IEI sales
representative directly by sending an email to
32sales@ieiworld.com.
Page 13
Page 30
The AFL3-W15C/W19C-ULT3 flat bezel panel PC is shipped with the following
components:
Quantity Item Image
1 AFL3-W15C/W19C-ULT3 panel PC
1 96 W power adapter
AFL3-W15C/W19C-ULT3 Panel PC
(P/N: 63040-010096-100-RS)
1 Power cord
4
Screws for VESA mounting
4
Screws for HDD installation
1 Utility CD
1 One Key Recovery CD
Page 14
Page 31
AFL3-W15C/W19C-ULT3 Panel PC

2.3 Optional Items

The following are optional components which may be separately purchased:
Item and Part Number Image
VESA 100 wall mount kit (P/N: AFLWK-19B)
Panel mounting kit (P/N: AFL3PK-W07A-R10)
Rack mounting kit
Arm (P/N: ARM-11-RS)
Arm (P/N: ARM-31-RS)
Page 15
Page 32
Item and Part Number Image
Stand for VESA 100 (P/N: STAND-A19-RS)
Stand for VESA 75/VESA 100 (P/N: STAND-C19-R10)
Magnetic card reader
AFL3-W15C/W19C-ULT3 Panel PC
(P/N: AFL3P-W10MSR-U-R10)
Barcode scanner (P/N: AFL3-2D-R10)
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
Page 16
Page 33
AFL3-W15C/W19C-ULT3 Panel PC

3 Installation

Chapter
3
Page 17
Page 34

3.1 Anti-static Precautions

WARNING:
Failure to take ESD precautions during the maintenance of the
AFL3-W15C/W19C-ULT3 may result in permanent damage to the
AFL3-W15C/W19C-ULT3 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL3-W15C/W19C-ULT3. Dry climates are especially susceptible to ESD. It
is therefore critical that whenever the AFL3-W15C/W19C-ULT3 is accessed internally, or
any other electrical component is handled, the following anti-static precautions are strictly
adhered to.
AFL3-W15C/W19C-ULT3 Panel PC
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the AFL3-W15C/W19C-ULT3,
place it on an anti-static pad. This reduces the possibility of ESD damaging
the AFL3-W15C/W19C-ULT3.
Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.

3.2 Installation Precautions

When installing the flat bezel panel PC, please follow the precautions listed below:
Power turned off: When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.
Page 18
Certified Engineers: Only certified engineers should install and modify
onboard functionalities.
Page 35
AFL3-W15C/W19C-ULT3 Panel PC
Anti-static Discharge: If a user open the rear panel of the flat bezel panel PC,
to configure the jumpers or plug in added peripheral devices, ground
themselves first and wear an anti-static wristband.

3.3 Installation and Configuration Steps

The following installation steps must be followed.
Step 1: Unpack the flat bezel panel PC.
Step 2: Install an mSATA module or a HDD.
Step 3: Configure the system.
Step 4: Connect peripheral devices to the flat bezel panel PC.
Step 5: Mount the flat bezel panel PC. Step 0:

3.4 Removing the Back Covers

To access the AFL3-W15C/W19C-ULT3 internally the plastic back cover and the internal
aluminum cover must be removed. To remove the covers, please follow the steps below.
Step 1: Remove the retention screws from the back cover. Two types of screw are used
for securing the plastic cover of the AFL3-W15C-ULT3. See Figure 3-1 for det
Be aware of this for reinstalling the plastic cover.
ail.
Figure 3-1: AFL3-W15C-ULT3 Back Cover Retention Screws
Page 19
Page 36
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-2: AFL3-W19C-ULT3 Back Cover Retention Screws
Step 2: Lift the plastic back cover off the AFL3-W15C/W19C-ULT3.
Step 3: Remove the retention screws from the internal aluminum cover. Two types of
screw are used for securing the aluminum cover. See the following diagrams for
detail. Be aware of this for reinstalling the aluminum cover. For 15” panel PC: see Figure 3-3
” panel PC: see Figure 3-4
For 19
Page 20
Figure 3-3: AFL3-W15C-ULT3 Aluminum Cover Retention Screws
Page 37
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-4: AFL3-W19C-ULT3 Aluminum Cover Retention Screws
Step 4: Lift the aluminum cover off the AFL3-W15C/W19C-ULT3. A thermal pad is
attached under the center of the aluminum cover. To easily remove the cover,
turn the cover in a clockwise direction first to detach the thermal pad before lifting the cover (Figure 3-5).
Figure 3-5: Lift the Aluminum Cover
Page 21
Page 38

3.5 M.2 Module Installation

The AFL3-W15C/W19C-ULT3 has an M.2 M-key slot for M.2 2280 module installation. To
install an M.2 module into the AFL3-W15C/W19C-ULT3, please follow the steps below:
Step 1: Remove the plastic back cover and the internal aluminum cover. See
Section 3.4 above.
AFL3-W15C/W19C-ULT3 Panel PC
Step 2: Locate the M.2 slot. Remov
motherboard as shown in Figure 3-6.
e the preinstalled retention screw on the
Page 22
Figure 3-6: M.2 Module Slot Location
Step 3: Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card
into the socket at an angle of about 20º (Figure 3-7).
Page 39
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-7: Inserting the M.2 Module into the Slot at an Angle
Step 4: Secure the M.2 module with the previously removed retention screw
(Figure 3-8).
Figure 3-8: Securing the M.2 Module
Page 23
Page 40
AFL3-W15C/W19C-ULT3 Panel PC

3.6 mSATA Module Installation (Full-Size)

To install an full-size mSATA module into the AFL3-W15C/W19C-ULT3, please follow the
steps below:
Step 1: Remove the plastic back cover and the internal aluminum cover. See
Section 3.4 above.
Step 2: Locate the mSA
screw pillar as shown in Figure 3-9.
Figure 3-9: mSATA Module Slot Location
Step 3: To avoid interference of the board circuit, remove the retention screw and
TA module slot. Remove the preinstalled retention screw on the
Page 24
standoff for a half-size PCIe Mini card as shown in Figure 3-10.
Page 41
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-10: Removing the Retention Screw and Standoff
Step 4: Install the previously removed standoff to the screw hole for the full-size PCIe
Mini card (Figure 3-11).
Figure 3-11: Installing the Standoff
Step 5: Line up the notch on the mSATA module with the notch on the connector. Slide
the PCIe Mini card into the socket at an angle of about 20º (Figure 3-12).
Page 25
Page 42
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-12: Installing an mSATA Module
Step 6: Secure the mSATA module with the retention screw. Push the other end of the
mSATA module down and secure the module with the previously removed retention screw (Figure 3-12).
Figure 3-13: Securing the mSATA Module
Step 7: Re-install the aluminum cover and the plastic back cover. Step 0:
Page 26
Page 43
AFL3-W15C/W19C-ULT3 Panel PC
NOTE:
To install a half-size mSATA module, simply remove the pre-installed
retention screw of the PCIe Mini card slot and insert the half-size
mSATA module into the socket. Then, secure the module with the
previously removed retention screw.

3.7 HDD Installation

To install the HDD into the system, please follow the steps below:
Step 1: Remove the plastic back cover and the internal aluminum cover. See
Section 3.4 above.
Step 2: Remov
panel PC.
Figure 3-14: HDD Bracket Retention Screws
e the four HDD bracket retention screws and lift the HDD bracket off the
Step 3: Attach the HDD brackets to the HDD. To do this, align the four retention screw
holes in the both sides of the HDD bracket with the retention screw holes on the
Page 27
Page 44
sides of the HDD. Insert four retention screws into the HDD bracket (Figure 3-15).
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-15: HDD Retention Screws
Step 4: Connect the SATA cable to the rear of HDD from the motherboard.
Step 5: Install the HDD into the AFL3-W15C/W19C-ULT3 by aligning the retention screw
holes in the HDD brackets with the retention screw holes on the chassis. Insert
the four retention screws.
Figure 3-16: HDD Installation
Page 28
Step 6: Replace the internal aluminum cover and the plastic back cover. Step 0:
Page 45
AFL3-W15C/W19C-ULT3 Panel PC

3.8 DB-9 Serial Port Pin 9 Selection

Pin 9 on the COM1 and COM2 DB-9 connectors can be set as the ring (RI) signal, +5 V or +12 V. The jumper selection options are shown in Table 3-1 and Table 3-2.
JP5 Description
Short 1-2 COM1 RI Pin use +12 V Short 3-4 COM1 RI Pin use RI (Default)
Short 5-6 COM1 RI Pin use +5 V
Table 3-1: COM1 Pin 9 Setting Jumper Settings (JP5)
JP4 Description
Short 1-2 COM2 RI Pin use +12 V Short 3-4 COM2 RI Pin use RI (Default)
Short 5-6 COM2 RI Pin use +5 V
Table 3-2: COM2 Pin 9 Setting Jumper Settings (JP4)
The DB-9 Serial Port Pin 9 Setting jumper locations are shown in Figure 3-17 below.
Figure 3-17: DB-9 Serial Port Pin 9 Setting Jumper Locations
Page 29
Page 46
AFL3-W15C/W19C-ULT3 Panel PC

3.9 RS-232/422/485 Serial Port Selection

The COM1_SEL1 and JP3 jumpers set the communication protocol used by the COM1
DB-9 serial communication port as RS-232, RS-422 or RS-485. The RS-232/422/485 serial port selection settings are shown in Table 3-3 a
COM1_SEL1 Description
Open RS-232 (Default) Short 1-2, 3-4, 5-6, 7-8 RS-422/RS-485
Table 3-3: RS-232422/485 Selection Jumper Settings (COM1_SEL1)
nd Table 3-4.
JP3 Description
Short 1-2 RS-232 (Default)
Short 1-2, 3-4 RS-422 Short 3-4 RS-485
Table 3-4: RS-232/422/485 Selection Jumper Settings (JP3)
The RS-232/422/485 selection jumper locations are shown in Figure 3-18.
Figure 3-18: RS-232/422/485 Selection Jumper Locations
Page 30
Page 47
AFL3-W15C/W19C-ULT3 Panel PC

3.9.1 COM1 Pinouts

The pinouts of COM1 external serial port are detailed below.
PIN NO. RS-232 RS-422 RS-485
1 DCD TXD422- TXD485­2 RXD TXD422+ TXD485+
3 TXD RXD422+ -­4 DTR RXD422- --
5 GND -- -­6 DSR -- --
7 RTS -- -­8 CTS -- --
9 RI -- --
Table 3-5: RS-232/422/485 Serial Port (COM1) Pinouts

3.10 Clear CMOS

If the AFL3-W15C/W19C-ULT3 fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,
push the clear CMOS button for three seconds, then restart the system. The clear CMOS button location is shown in Figure 3-19.
Figure 3-19: Clear CMOS Button Location
Page 31
Page 48

3.11 AT/ATX Mode Selection

AT or ATX power mode can be used on the AFL3-W15C/W19C-ULT3. The selection is made through an AT/ATX switch located on the bottom panel (Figure 3-20).
Figure 3-20: AT/ATX Switch Location

3.11.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a
AFL3-W15C/W19C-ULT3 Panel PC
power switch. The AFL3-W15C/W19C-ULT3 panel PC turns on automatically when the
power is connected. The AT mode benefits a production line to control multiple panel PCs
from a central management center and other applications including:
ATM
Self-service kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow

3.11.2 ATX Power Mode

With the ATX mode selected, the AFL3-W15C/W19C-ULT3 panel PC goes in a standby
mode when it is turned off. The panel PC can be easily turned on via network or a power
switch in standby mode. Remote power control is perfect for advertising applications
since the broadcasting time for each panel PC can be set individually and controlled
remotely. Other possible application includes
Page 32
Security surveillance
Point-of-Sale (POS)
Advertising terminal
Page 49
AFL3-W15C/W19C-ULT3 Panel PC

3.12 Mounting the System

The methods of mounting the AFL3-W15C/W19C-ULT3 are listed below.
Wall mounting
Panel mounting
Rack mounting
Arm mounting
Stand mounting
The mounting methods are described below.

3.12.1 Wall Mounting

To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 3-21).
Page 33
Page 50
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-21: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel of the flat bezel panel PC and tighten until the screw shank is secured against the rear panel (Figure 3-22).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear panel.
If the screw is missing, the thread depth of the replacement screw should
be not more than 4 mm.
Page 34
Page 51
AFL3-W15C/W19C-ULT3 Panel PC
Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 3-22).
re that all four of the mounting screws fit snugly into their respective slotted
Ensu
holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 3-22: Chassis Support Screws
Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting
bracket (Figure 3-23).
Page 35
Page 52
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-23: Secure the Panel PC

3.12.2 Panel Mounting

To mount the AFL3-W15C/W19C-ULT3 flat bezel panel PC into a panel, please follow the
steps below.
Step 1: Select the position on the panel to mount the panel PC.
Step 2: Cut out a section corresponding to the size shown below. The size must be
smaller then the outer edge.
Page 36
Figure 3-24: AFL3-W15C-ULT3 Cutout Dimensions
Page 53
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-25: AFL3-W19C-ULT3 Cutout Dimensions
Step 3: Slide the panel PC through the hole until the frame is flush against the panel.
Step 4: Insert a M5*50 screw into the screw hole on the side of the panel mounting
bracket. Then, install the following components onto the screw in sequence. See Figure 3-26.
Sequence Item Photo Instruction
1 Spring
2 Nut
3 Plastic
cap
Install a spring onto the screw.
Tighten a nut until the spring is compressed enough for plastic cap. Tighten a plastic cap onto the end of screw thread.
Step 5: Repeat Step 4 to install the other three screws into the sides of the two panel
mounting brackets.
Page 37
Page 54
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-26: Panel Mounting Kit Installation
Step 6: Align the panel mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 7: Secure the two panel mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes and tightening them (Figure 3-27).Step 0:
Page 38
Page 55
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-27: Securing Panel Mounting Brackets
NOTE:
The panel mounting kit described in this section is an optional item. To
purchase it, please contact an IEI sales representative.
Page 39
Page 56

3.12.3 Cabinet and Rack Installation

The AFL3-W15C/W19C-ULT3 flat bezel panel PC can be installed into a cabinet or rack.
The installation procedures are similar to the panel mounting installation. To do this,
please follow the steps below:
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the AFL3-W15C/W19C-ULT3 flat bezel panel PC
and the rack/cabinet into which the AFL3-W15C/W19C-ULT3 is
installed.
Step 1: Slide the rear chassis of the AFL3-W15C/W19C-ULT3 panel PC through the
AFL3-W15C/W19C-ULT3 Panel PC
rack/cabinet bracket until the frame is flush against the front of the bracket.
Step 2: Insert a M5*50 screw into the screw hole on the side of the rack mounting
bracket. Then, install the following components onto the screw in sequence. See Figure 3-26.
Sequence Item Photo Instruction
1 Spring
2 Nut
3 Plastic
cap
Install a spring onto the screw.
Tighten a nut until the spring is compressed enough for plastic cap. Tighten a plastic cap onto the end of screw thread.
Step 3: Repeat Step 4 to install the other three screws into the sides of the two rack
mounting brackets.
Page 40
Page 57
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-28: Rack Mounting Kit Installation
Step 4: Align the rack mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 5: Secure the two rack mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes and tightening them (Figure 3-29).
Page 41
Page 58
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-29: Securing Rack Mounting Brackets
Step 6: Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet
(Figure 3-30).
Page 42
Figure 3-30: Install into a Rack/Cabinet
Page 59
AFL3-W15C/W19C-ULT3 Panel PC
Step 7: Once the panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to the front of the rack or cabinet (Figure 3-30).
NOTE:
The rack mounting kit described in this section is an optional item. To
purchase it, please contact an IEI sales representative.

3.12.4 Arm Mounting

The AFL3-W15C/W19C-ULT3 is VESA (Video Electronics Standards Association)
compliant and can be mounted on an arm with a 75 mm or a 100 mm interface pad. To
mount the AFL3-W15C/W19C-ULT3 on an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and that
the arm has a 75 mm or a 100 mm interface pad. If the mounting arm is not
VESA compliant it cannot be used to support the AFL3-W15C/W19C-ULT3
flat bezel panel PC.
Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat bezel
panel PC onto the interface pad of the mounting arm.
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat bezel panel PC (Figure 3-31).
Page 43
Page 60
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-31: Arm Mounting Retention Screw Holes
Step 4: Secure the AFL3-W15C/W19C-ULT3 to the interface pad by inserting four
retention screws through the mounting arm interface pad and into the AFL3-W15C/W19C-ULT3.Step 0:
Page 44
Figure 3-32: Arm Mounting
Page 61
AFL3-W15C/W19C-ULT3 Panel PC

3.12.5 Stand Mounting

To mount the AFL3-W15C/W19C-ULT3 using the stand mounting kit, please follow the
steps below.
Step 1: Locate the screw holes on the rear of the AFL3-W15C/W19C-ULT3. This is
where the bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL3-W15C/W19C-ULT3 insert the retention
screws into the screw holes and tighten them.
Figure 3-33: Stand Mounting (Stand-A/Bxx)
Page 45
Page 62

3.13 Powering On the System

To power on the system, follow the steps below:
Step 1: Connect the power cord to the power adapter. Connect the other end of the
power cord to a power source.
Step 2: Connect the power adapter to the power connector of the
AFL3-W15C/W19C-ULT3.
Step 3: Locate the power button on the I/O panel.
Step 4: Short press the power button to power up the system. Once powered up, the
power LED on the front panel turns on in green. Step 0:
AFL3-W15C/W19C-ULT3 Panel PC
Figure 3-34: Powering On the System
Page 46
Page 63
AFL3-W15C/W19C-ULT3 Panel PC

3.14 Reset the System

The reset button enables user to reboot the system when the system is turned on. The reset button location is shown in Figure 3-35. Pre
Figure 3-35: Reset Button Location

3.15 Software Installation

NOTE:
The content of the CD may vary throughout the life cycle of the product and is
subject to change without prior notice. Visit the IEI website or contact
technical support for the latest updates.
ss the reset button to reboot the system.
All the drivers for the AFL3-W15C/W19C-ULT3 are on the utility CD that came with the
system. The utility CD contains drivers for Windows 7, Windows 8 and Windows 10
operating systems. If the drivers are not installed automatically, please install the following
drivers manually.
Chipset
VGA (Windows 64-bit OS only)
LAN (Windows 64-bit OS only)
Audio
Intel
ME (Intel
USB 3.0 (Windows 7/8.1 OS only)
Wi-Fi
Touchscreen
®
Serial IO (Windows 8.1/10 64-bit OS only)
®
AMT)
Page 47
Page 64
AFL3-W15C/W19C-ULT3 Panel PC
RFID (for optional RFID module)

3.16 Installing Windows 7 from USB 3.0 Drives

Microsoft Windows 7 installation media does not include native driver support for USB 3.0,
so during installation, a keyboard/mouse connected to a USB 3.0 port does not respond.
The Windows 7 USB 3.0 Creator Utility automates the steps to update a Windows 7
installation image so that it contains USB 3.0 drivers. To install Windows 7 from a USB
drive onto the AFL3-W15C/W19C-ULT3, please follow the steps described below.
Step 1: Create a USB flash drive installer. Use your Windows 7 DVD or ISO image to
create a bootable USB flash drive. Instructions on how to do are found on
Microsoft’s website
Step 2: Download and unzip the Windows 7 USB 3.0 Creator utility
on the Admin system.
Step 3: Connect the USB device containing the Windows 7 image to the Admin system.
.
to a temporary folder
Step 4: Right-click the file “Installer_Creator.exe” and select Run as administrator.
Step 5: Browse to the root of the USB drive.
Step 6: Click “Create Image” to begin the creation process.
Step 7: Wait for the process to finish. It can take up to 15 minutes.
Step 8: Using the updated installer, proceed with the Windows 7 installation as you
normally would.
Page 48
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use