The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd functi on and d oes not r epresent a com mitm ent on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n
purposes only and m ay be trademarks and/or registe red trademarks of their respecti ve
owners.
The WIFI-RT3593-DB is a mini PCI-Express half-size wireless LAN m odule. It complies
with the IEEE 802 .11a/b/g/n standard and supports 3Tx/3Rx 3-stream MIMO to enable
data rates up to 450Mbps for a 40MHz channel.
The integrated PCIE W i-Fi RT3593 single chip supports 802.11x authentication, W EP
64/128, WPA, WPA2, WAPI encryption and guarantees the wireless network security.
This product is compatible with a variety of operating systems, including Windows X P,
CE6.0, XPE, 2000, ME, 98SE, Vista 32/64, Windows 7 32/64, Linux and MAC. It has
features such as strong s ignal, long distance transm ission, low power cons umption, and
high performance.
1.2 Features
Some of the WIFI-RT3593-DB wireless LAN module features are listed below:
PCIe Half-Size Mini card
Dual band 802.11a/b/g/n supports 3Tx/3Rx 3-stream MIMO to enable data
rates up to 450Mbps for a 40MHz channel.
20MHz/ 40MHz bandwidth
WIFI-RT3593-DB
Page 3
Solid design with external anten na di vers ity
Low power consumption with advanced power management
Supports 802.11x authentication, WEP 64/128, WP A, WPA2, WAPI
Static electricity can destroy certain electronics. Make sure to follow the
ESD precautions to preve nt damage to the product, and injur y to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WIFI-RT3593-DB. Dry climates are especially susceptible to ESD. It is
therefore critical that when ever the WIFI-RT3593-DB or any other electrical com ponent is
handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Touch any grounded conducting material before handling
the board. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the WIFI-RT3593-DB, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
WIFI-RT3593-DB.
2.2 Unpacking Precautions
When the WIFI-RT3593-DB is unpacked, please do the following:
Follow the antistatic guidelines above.
Make sure the packing box is facing upwards so the WIFI-RT3593-DB does
not fall out of the box.
Make sure all the packing list items are present.
WIFI-RT3593-DB
Page 8
2.3 Pack i ng List
NOTE:
If any of the components listed in the checklist below are missing, do not
proceed with the installation. Contact the IEI reseller or vendor the
WIFI-RT3593-DB was purchased from or contact an IEI sales representative
directly by sending an email to
The WIFI-RT3593-DB is shipped with the following components:
Quantity Item and Part Number Image
1 WIFI-RT3593-DB
1 Utility CD(drivers and user manual)
1 Quick Installation Guide
sales@iei.com.tw.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.