VGA to 24 -bits dual channel LVDS converter board
VGA- LVDS-R10
Quick Installation Guide
Version 1. 0
Mar. 7, 2011
Package Contents
VGA-LVDS includes the following items:
l 1 x VGA-LVDS-R10 Converter Card
l 1 x Mini Jumper Pack
l 1 x QIG (Quick Installation Guide)
©2011 Copyright by IEI Technology corp.
All rights reserved.
1
Features:
l LVDS supported by scaling chip Novatek 68667UFG
l Resolution support: 800x600, 1024x768, 1280x1024, 1366x768,
1920x1080
Ordering Information
VGA-LVDS-R10:
VGA to 24-bits dual channel LVDS converter board
32600-004900-RS
30-pin LVDS connecting cable for evaluation only
Jumpers Setting
LABEL FUNCTION
J_VLVDS1 LVDS1 Voltage Selection
JP10 LCD Resolution Selection Connector
J_VLVDS1: LVDS1 Voltage Selection
J_VLVDS1 DESCRIPTION
1-2 +3.3V LVDS (default)
2-3 +5V LVDS
JP10: LCD Resolution Selection Connector
PIN5,6 PIN3,4 PIN PANEL TYPE
OPEN OPEN SHORT Mode0: 800X600(Default)
Single Channel 18-bit
OPEN SHORT OPEN Mode1: 1024X768
Single Channel 18-bit
OPEN SHORT SHORT Mode2: 1280X1024
Dual Channel 24 -bit
SHORT OPEN OPEN Mode3: 1366X768
Single Channel 24-bit
SHORT OPEN SHORT Mode4: 1920X1080
Dual Channel 24 -bit
2
Table of Connectors
LABEL FUNCTION
LVDS1 LVDS Panel Connector
INV1 LVDS1 Backlight Control
KEY1 LVDS1 Backlight Adjust
JP3 VGA-LVDS Connector
LVDS1 : LVDS LCD Connector.
PIN No DESCRIPTION PIN No DESCRIPTION
1 GND 2 GND
3 1st LVDS data0 output + 4 1st LVDS data0 output
5 1st LVDS data1 output + 6 1st LVDS data1 output
7 1st LVDS data2 out put + 8 1st LVDS data2 output
9 1st LVDS clock output + 10 1st LVDS clock output
11 1st LVDS data3 output + 12 1st LVDS data3 outpu
13 GND 14 GND
15 2sd LVDS data0 output + 16 2sd LVDS data0 output
17 2sd LVDS data1 output + 18 2sd LVDS data1 output
19 2sd LVDS data2 output + 20 2sd LVDS data2 output
21 2sd LVDS clock output + 22 2sd LVDS clock output
23 2sd LVDS data3 output + 24 2sd LVDS data3 output
25 GND 26 GND
27 +LCD (3.3V,5V) 28 +LCD (3.3V,5V)
29 +LCD (3.3V,5V) 30 +LCD (3.3V,5V)
INV1: LVDS1 Backlight Control
PIN No DESCRIPTION PIN No DESCRIPTION
1 BLADJ# 2 GND
3 12V 4 GND
5 BLEN#
KEY1: LVDS1 Backlight Adjust
PIN No DESCRIPTION PIN No DESCRIPTION
1 LED-BL 2 N/A
3 LED-AM 4 menu/enter
5 DOWN 6 UP
7 auto/exit 8 POWER
9 GND
3
JP3: VGA-LVDS Connector
PIN No DESCRIPTION PIN No DESCRIPTION
1 GND 2 5V
3 HSYNC 4 Plugged
5 VSYNA 6 5V
7 GND 8 GND
9 RED 10 3.3V
11 GREEN 12 3.3V
13 BLUE 14 3.3V
15 GND 16 GND
17 DDC_DATA 18 12V
19 DDC_CLOCK 20 12V
Board Layout: Jumper and Connector Locations
4
Loading...